105071-1510 ZEXEL 9 430 615 129 BOSCH NOZZLE-HOLDER 9430615129 1050711510 rfb713tv0


 

Information nozzle-holder

BOSCH 9 430 615 129 9430615129
ZEXEL 105071-1510 1050711510
MAZDA RFB713TV0 rfb713tv0
105071-1510 NOZZLE-HOLDER
Rating:
76
Buy NOZZLE-HOLDER 105071-1510 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

4. [1] 150510-0700 STOP PIN
6. [1] 150562-3100 COMPRESSION SPRING
13. [1] 150524-0600 SPACER BUSHING
20. [1] 150601-4201 NOZZLE-RETAINING NUT
36. [1] 150621-0400 UNION NUT
800S/1. [0] 150523-5000 SHIM D11.5&4.5T0.50
800S/1. [0] 150523-5200 SHIM D11.5&4.5T0.54
800S/1. [0] 150523-5200 SHIM D11.5&4.5T0.54
800S/1. [0] 150523-5400 SHIM D11.5&4.5T0.58
800S/1. [0] 150523-5600 SHIM D11.5&4.5T0.62
800S/1. [0] 150523-5800 SHIM D11.5&4.5T0.66
800S/1. [0] 150523-6000 SHIM D11.5&4.5T0.70
800S/1. [0] 150523-6200 SHIM D11.5&4.5T0.74
800S/1. [0] 150523-6400 SHIM D11.5&4.5T0.78
800S/1. [0] 150523-6600 SHIM D11.5&4.5T0.82
800S/1. [0] 150523-6800 SHIM D11.5&4.5T0.86
800S/1. [0] 150523-7000 SHIM D11.5&4.5T0.90
800S/1. [0] 150523-7200 SHIM D11.5&4.5T0.94
800S/1. [0] 150523-7400 SHIM D11.5&4.5T0.98
800S/1. [0] 150523-7500 SHIM D11.5&4.5T1.00

Cross reference number

Zexel num
Bosch num
Firm num
Name
105071-1510 
9 430 615 129 
RFB713TV0  MAZDA
NOZZLE-HOLDER
K 53LZ NOZZLE HOLDER NH NH




Information:

Use fuel consumption, service hours, or calendar time, whichever occurs first, to determine maintenance intervals. Experience has shown that maintenance intervals are most accurately scheduled on the basis of fuel consumed rather than service hours.Daily
Walk-Around Inspection - Inspect engine for leaks and loose connections Engine Crankcase - Check oil level Cooling System - Check coolant level Clutch - Check/Adjust/Lubricate Air Starter & Air Tank (if equipped) - Check/Adjust/Drain water Engine Air Cleaner - Check service indicator SR4 Generator - Inspect/CheckEvery 1,100 L (300 gal) of Fuel or 50 Service Hours*
Dust Collector - Clean Light Duty Air Cleaner (If Equipped) - ReplaceEvery 2,800 L (750 gal) of Fuel 125 Service Hours*
Clutch - Check/Adjust/Lubricate Generator Space Heaters (If Equipped) - CheckEvery 5,600 L (1,500 gal) of Fuel or 250 Service Hours*
Scheduled Oil Sampling (S O S)1 - Obtain Sample Engine Oil and Filter(s)1 - Change Crankcase Breather1 - Clean Engine Valve Lash (Between First 250 and 1000 Service Hours Only)1 - Check/Adjust Cooling System - Test for supplemental coolant additive concentration Fuel System - Clean/Replace filters, Drain water from fuel tank Radiator Fins, Aftercooler, Belts, and Hoses - Inspect/Check Fan Drive Bearing - Lubricate Batteries - Check/Clean Magnetic Pickup (At First Oil Change Only - Inspect/Clean1These maintenance requirements are to be performed between the 250 and the 1000 Service Hour interval for Turbocharged (T) Engines ONLY. Refer to 500 Hour interval for Naturally Aspirated (NA) Engines.Every 11,250 L (3,000 gal) of Fuel or 500 Service Hours (NA Only)*
Scheduled Oil Sampling (S O S) Analysis - Obtain Sample Engine Oil and Filter(s) - Change Crankcase Breather - Clean Engine Valve Lash (Between First 500 and 1000 Service Hours Only) - Check/AdjustEvery 22,500 L (6,000 gal) of Fuel or 1000 Service Hours*
Engine Protection Devices - Inspect SR4 Generator and Control Panel - Inspect Fuel Control Linkage - LubricateEvery 45,000 L (12,000 gal) of Fuel 2000 Service Hours*
Engine Valve Lash, Valve Rotators, Fuel Ratio Control, Set Point, and Low Idle - Check/Adjust Fuel Injection Nozzles - Test/Clean/Replace Turbocharger - Inspect Engine Mounts - Inspect Crankshaft Vibration Damper - Inspect SR4 Generator - Check/Inspect Clean/LubricateEvery 68,220 L (18,000 gal) of Fuel or 3000 Service Hours or Two Years*
Cooling System - Add Extender (Extended Life Coolant Only) Cooling System - Drain/Clean/Replace Coolant - Conventional Coolant/Antifreeze Only Water Pump Seal - Inspect/Replace Hoses - Replace Thermostat - ReplaceEvery 90,000 L (24,000 gal) of Fuel or 4000 Service Hours*
Magnetic Pickup - Inspect/Clean SR4 Generator - Check/Inspect/Clean/LubricateEvery 135,000 L (36,000 gal) of fuel or 6,000 Service Hours or Four Years
Cooling System - Drain/Flush/Replace Coolant (Extended Life Coolant Only)*Perform previous maintenance interval items first.

Have questions with 105071-1510?





Group cross 105071-1510 ZEXEL

Mazda 

9 430 615 055 
RF7113TV0 
NOZZLE-HOLDER
105071-1510  
9 430 615 129 
RFB713TV0 
NOZZLE-HOLDER
 
 

Mazda 

9 430 615 085 
145613TV0 
NOZZLE-HOLDER
9 430 615 085 
145613TV10 
NOZZLE-HOLDER

Komatsu 

9 430 615 164 
6202123310 
NOZZLE-HOLDER
 
 

9 430 615 561 
 
NOZZLE-HOLDER ASSEMBLY
Back to top