105048-4410 ZEXEL 9 430 615 968 BOSCH NOZZLE-HOLDER 9430615968 1050484410

Oil Filters (1), Oil Level Gauge (2), Oil Filler (3), Service Hour Meter (4), Fuel Filters & Priming Pump (5), Zinc Rods (6), Air Cleaner (7), Turbocharger (8), Crankcase Breather (9), Jacket Water Pump (10), Fuel Pump & Governor (11), Raw Water Pump (12), Oil Cooler (13).Serial Number Plate
For quick reference, record the serial number in the space provided below. Engine Serial Number ____________________The Serial Number Plate is located on the left rear side of the cylinder block.Information Plate
The 9L6531 Information Plate is located on the left side of the cylinder block or right hand side rear valve cover. The high idle rpm and the full load rpm are stamped on the Engine Information Plate.Reference Numbers
Record for ReferenceEngine Model ____________________Engine Serial No. ____________________Engine Arrangement No. ____________________Modification No. ____________________Engine Power Rating ____________________Engine Low Idle rpm ____________________Engine Full Load rpm ____________________Performance Specification No. ____________________Governor Group No. ____________________Fuel Filter No. ____________________Lubrication Oil Filter Element No. ____________________Auxiliary Oil Filter Element No. ____________________Supplemental Coolant Additive Maintenance Element No. ____________________Supplemental Coolant Additive Precharge Element No. ____________________Coolant Additive (Part No. & Quantity) ____________________Air Cleaner Element No. ____________________Lube System Capacity (Total) ____________________Cooling System Capacity (Total) ____________________Fan Drive Belt Set No. (If Equipped) ____________________Alternator Belt No. ____________________Zinc Rods ____________________Thermostats ____________________Engine Identification Numbers
Caterpillar engines are identified with serial numbers, fuel system setting numbers, performance specifications and arrangement numbers. In some cases modification numbers are also used. These numbers are shown on the serial number plate mounted on the engine.Caterpillar dealers need all of these numbers to determine which components were included on the engine when it was assembled at the factory. This permits accurate identification of replacement part numbers.Ordering Parts
Quality Caterpillar replacement parts are available from Caterpillar dealers throughout North America and the world. Their parts stocks are up to date and include all parts normally required to protect your investment in Caterpillar engines.* When ordering parts, your order should specify the part number, part name, quantity and serial number, arrangement number and modification number of the engine for which the parts are needed. If in doubt about the part number, please provide your dealer with a complete description of the needed item.* When maintenance or repair is needed for your Caterpillar engine, be prepared to give the dealer all the information that is provided on the 9L6531 Information Plate, described earlier in this manual.* Discuss the problem with the dealer, such as; when it occurs, what happens, etc. This will help the dealer in troubleshooting and solving the problem faster.A list of requirements of all Marine Shipping Societies and several items recommended by Caterpillar follows. To customize this list for your particular engine arrangement and application contact your authorized dealer and provide the information.1. Engine Serial Number2. Engine Arrangement Number3. Rated Horsepower4. Electrical System (12V or 24V)5. Alternator (1 or 2 belts)6. Raw Water Pump Part No.7. Type of Air Filter8. Water Lines Group (Parts Manual)Product Support Literature
All 3406 Marine EnginesCombined Publications
SEBU5881-Operation & Maintenance Manual (Marine Propulsion)SEBU6336-Operation & Maintenance Manual (contains Marine Auxiliary Generator Sets)SENR3023-3406 Service Manual