105048-4081 ZEXEL 9 430 615 591 BOSCH NOZZLE-HOLDER 9430615591 1050484081 16610z6004

Information nozzle-holder

BOSCH 9 430 615 591 9430615591

ZEXEL 105048-4081 1050484081

NISSAN-DIESEL 16610Z6004 16610z6004

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy NOZZLE-HOLDER 105048-4081 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

6.	[1]	150539-0600	SHIM D6.2&2.6T1.20
6B.	[1]	150590-1900	SHIM
8.	[1]	150562-6300	COMPRESSION SPRING
10.	[1]	150560-2200	SLOTTED WASHER
11.	[1]	150624-1900	BUSHING
12.	[1]	150562-6400	COMPRESSION SPRING
15.	[1]	150560-1800	SLOTTED WASHER
16.	[2]	150508-6700	BEARING PIN
18.	[1]	150524-6100	SPACER BUSHING
22.	[1]	150655-1200	NOZZLE-RETAINING NUT
800S/1.	[1]	150538-9800	SHIM D6.2&2.6T0.40
800S/1.	[1]	150538-9900	SHIM D6.2&2.6T0.50
800S/1.	[1]	150539-0000	SHIM D6.2&2.6T0.52
800S/1.	[1]	150539-0100	SHIM D6.2&2.6T0.54
800S/1.	[1]	150539-0200	SHIM D6.2&2.6T0.56
800S/1.	[1]	150539-0300	SHIM D6.2&2.6T0.58
800S/1.	[1]	150539-0400	SHIM D6.2&2.6T0.60
800S/1.	[1]	150539-0500	SHIM D6.2&2.6T0.70
801S/1.	[1]	150591-1000	SHIM D7.2&3.6T0.10
801S/1.	[1]	150591-2000	SHIM D7.2&3.6T0.20
801S/1.	[1]	150591-3000	SHIM D7.2&3.6T0.30
801S/1.	[1]	150591-4000	SHIM D7.2&3.6T0.40
801S/1.	[1]	150591-5000	SHIM D7.2&3.6T0.50
801S/1.	[1]	150591-5100	SHIM D7.2&3.6T0.51
801S/1.	[1]	150591-5200	SHIM D7.2&3.6T0.52
801S/1.	[1]	150591-5300	SHIM D7.2&3.6T0.53
801S/1.	[1]	150591-5400	SHIM D7.2&3.6T0.54
801S/1.	[1]	150591-5500	SHIM D7.2&3.6T0.55
801S/1.	[1]	150591-5600	SHIM D7.2&3.6T0.56
801S/1.	[1]	150591-5700	SHIM D7.2&3.6T0.57
801S/1.	[1]	150591-5800	SHIM D7.2&3.6T0.58
801S/1.	[1]	150591-5900	SHIM D7.2&3.6T0.59
802S.	[0]	150572-0700	STOP PIN L28.44

Include in #1:

101701-9180 as NOZZLE-HOLDER

101701-9190

101701-9200

Cross reference number

Zexel num

Bosch num

Firm num

Name

105048-4081

9 430 615 591

16610Z6004 NISSAN-DIESEL

NOZZLE-HOLDER
K

Information:

1. Remove suction bell (3) and tubes, oil supply tube (2) and Brake Saver oil supply tube (1) from the engine block and oil pump. 2. Remove three bolts (5) and oil pump (4) from the engine. The following steps are for installation of the oil pump.3. Put oil pump (4) in position on the engine. Make sure the oil pump gear is engaged with the crankshaft gear, and install three bolts (5) that hold the oil pump.4. Put clean engine oil on the O-ring seals on the oil tubes.5. Install suction bell (3) and tubes, oil supply tube (2) and the BrakeSaver oil supply tube (1).End By:a. install oil pan (BrakeSaver)Disassemble Oil Pump (BrakeSaver)
Start By:a. remove oil pump (Brake Saver) 1. Remove the bolt and washer that hold drive gear (1) on the shaft.2. Use tooling (A) to remove drive gear (1) from the shaft. Remove the key from the shaft. Put alignment marks on the pump bodies so they can be assembled in the correct position. 3. Remove retainer (3) for the bypass valve. Remove the spring and bypass valve.4. Remove bolts (4) that hold pump body (2) to the main pump body. Remove pump body (2).5. Use tooling (B) to remove the bearings from pump body (2). 6. Remove gears (7). Put identification marks on the gears so they can be assembled in the same position.7. Remove spacer (6) from main oil pump body (5). Use tooling (B) to remove the bearings from spacer (6).8. Remove the gears from main oil pump body (5). 9. Use tooling (B) to remove the bearings from the main oil pump body.Assemble Oil Pump (BrakeSaver)
1. Use tooling (B) to install bearings (8) until they are even with the outside surface of main oil pump body (5). Install bearings (8) so the joints in the bearings are 30 ° 15 ° from the center line