105048-3890 ZEXEL 9 430 615 187 BOSCH NOZZLE-HOLDER 9430615187 1050483890 8941222633

Information nozzle-holder

BOSCH 9 430 615 187 9430615187

ZEXEL 105048-3890 1050483890

ISUZU 8941222633 8941222633

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy NOZZLE-HOLDER 105048-3890 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

2.	[2]	150508-5900	BEARING PIN
4.	[1]	150560-0400	SLOTTED WASHER
6.	[1]	150562-4300	COMPRESSION SPRING
13.	[1]	150524-4600	SPACER BUSHING
20.	[1]	150655-0000	NOZZLE-RETAINING NUT
800S/1.	[1]	150591-1000	SHIM D7.2&3.6T0.10
800S/1.	[1]	150591-2000	SHIM D7.2&3.6T0.20
800S/1.	[1]	150591-3000	SHIM D7.2&3.6T0.30
800S/1.	[0]	150591-4000	SHIM D7.2&3.6T0.40
800S/1.	[1]	150591-5000	SHIM D7.2&3.6T0.50
800S/1.	[1]	150591-5100	SHIM D7.2&3.6T0.51
800S/1.	[1]	150591-5200	SHIM D7.2&3.6T0.52
800S/1.	[1]	150591-5300	SHIM D7.2&3.6T0.53
800S/1.	[1]	150591-5400	SHIM D7.2&3.6T0.54
800S/1.	[1]	150591-5500	SHIM D7.2&3.6T0.55
800S/1.	[1]	150591-5600	SHIM D7.2&3.6T0.56
800S/1.	[1]	150591-5700	SHIM D7.2&3.6T0.57
800S/1.	[1]	150591-5800	SHIM D7.2&3.6T0.58
800S/1.	[1]	150591-5900	SHIM D7.2&3.6T0.59

Include in #1:

101431-4200 as NOZZLE-HOLDER

Include in #2:

104741-1064 as NOZZLE-HOLDER

Cross reference number

Zexel num

Bosch num

Firm num

Name

105048-3890

9 430 615 187

8941222633 ISUZU

NOZZLE-HOLDER
K 53LZ NOZZLE HOLDER NH NH

Information:

Start By:a. remove valve coversb. remove fuel injection lines 1. Use tool (A) and a 5P328 crowfoot wrench (7/8") to loosen the fuel injection line nut at the nozzle end.
Do not let the tops of the fuel nozzles turn when the fuel lines are loosened. The nozzles will be damaged if the top of the nozzles turn in the body.
2. Use tool (B) to loosen the nut at the fuel injection line adapter end. Remove inner fuel injection lines (1). Install plugs in the fuel injection nozzles. 3. Remove the nut that holds the adapters to the cylinder head assembly. Remove fuel injection line adapters (2).Install Fuel Injection Line Adapters
1. Check the condition of O-ring seal (1) on fuel injection line adapter (2) for damage. Make a replacement if necessary.2. Lubricate O-ring seal (1) with clean engine oil. Install fuel injection line adapter (2). Tighten the retaining nut to a torque of 13.6 2.7 N m (10 2 lb ft). 3. Check the condition of the O-ring seal on inner fuel line (3) for damage, and make a replacement if necessary. Install inner fuel line (3).
Do not let the tops of the fuel nozzles turn when the fuel lines are tightened. The nozzles will be damaged if the top of the nozzles turn in the body.
4. Use tooling (A) to tighten the inner fuel line nuts to a torque of 42 6.8 N m (32 5 lb ft).End By:a. install fuel injection linesb. install valve covers