105048-3410 ZEXEL 9 430 615 064 BOSCH NOZZLE-HOLDER 9430615064 1050483410 8943721950


 

Information nozzle-holder

BOSCH 9 430 615 064 9430615064
ZEXEL 105048-3410 1050483410
ISUZU 8943721950 8943721950
105048-3410 NOZZLE-HOLDER
Rating:
13
Buy NOZZLE-HOLDER 105048-3410 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105048-3410 
105048-3230 
9 430 615 064 
8943721950  ISUZU
NOZZLE-HOLDER
* K 53LZ NH NH
105048-3410 
105048-3230 
9 430 615 064 
8972103870  ISUZU
NOZZLE-HOLDER
A * K 53LZ NH NH




Information:

The problems in this section are problems that do come about and are normally called "low power". These problems are not necessarily more common than engine problems, but they are possible problems which you need to read and check before an engine is disassembled.Read all of the items but make sure the first three are checked completely before making any engine test. Possible Causes/Corrections Tachometer ErrorTo check, connect a tachometer of known accuracy to the engine. Run the engine and make a comparison of the readings of the vehicle and test tachometers. If vehicle tachometer is defective, make repairs as necessary or install a new tachometer. Engine Operated At High AltitudeLess oxygen at higher altitudes causes the engine horsepower to go down. There is no effect on the horsepower of the engine for the first 2280 m (7500 ft) above sea level of operation. Brakes Do Not Completely ReleaseCheck the brakes by feeling all the brake drums. If the brakes of a wheel do not completely release, the brake drum for that wheel will be hotter than the brake drums for the other wheels. With the truck lifted with a jack, the wheels must have free rotation when turned by hand. Extra Engine Driven EquipmentAir compressors, hydraulic pumps, alternator, and other engine driven equipment that has damage, or that was not installed correctly, or that is not in correct adjustment, can take more horsepower to drive than expected. If necessary, disconnect the equipment and test the engine. Speedometer ErrorA defective speedometer does not give the correct speed or the correct indication of fuel consumption. An indication of low speed can cause the operator to feel that he has a power problem. Speeds Too HighThe need for more horsepower is easy to see as the speed of the vehicle is increased. This is especially true if the front of the vehicle has a large surface area. Application personnel can give you the horsepower necessary for different vehicle designs at different speeds. Overload On VehicleApplication personnel can give you the horsepower needs for different vehicles. High Moving ResistanceSoft ground conditions cause a need for more horsepower. To see if the problem is the engine, test the vehicle on a surface known to be good, or test on a chassis dynamometer. High Wind ResistanceThe horsepower needs for a truck can be divided into two parts. Part of the horsepower is used to move the vehicle and part is used to get through the resistance of the wind. The horsepower necessary to get through the resistance of the wind will increase as the vehicle is used at higher speeds. Vehicles with a large front area have a higher wind resistance and take more horsepower than those with a small front area. Some types of trucks, for example those used for the transportation of automobiles and or boats have high wind resistance even if the front area is small. Moving against the wind has the same effect on wind resistance as does higher

Have questions with 105048-3410?





Group cross 105048-3410 ZEXEL

Isuzu 

105048-3410  

105048-3230 
9 430 615 064 
8943721950 
NOZZLE-HOLDER
105048-3410  

105048-3230 
9 430 615 064 
8972103870 
NOZZLE-HOLDER
9 430 615 821 
8944763771 
NOZZLE-HOLDER
9 430 616 011 
8943617930 
NOZZLE-HOLDER
9 430 616 167 
 
NOZZLE-HOLDER

Mitsubishi 

9 430 616 012 
ME730413 
NOZZLE-HOLDER
9 430 616 012 
ME080392 
NOZZLE-HOLDER

Mazda 

9 430 615 314 
TF0113H60 
NOZZLE-HOLDER
9 430 615 276 
SLA113H60 
NOZZLE-HOLDER

Mitsubishi 

9 430 615 145 
ME727280 
NOZZLE-HOLDER

Iseki 

9 430 615 421 
62153300012B 
NOZZLE-HOLDER
9 430 615 421 
62153300012C 
NOZZLE-HOLDER
9 430 615 422 
62153300022B 
NOZZLE-HOLDER
9 430 615 422 
62153300022 
NOZZLE-HOLDER
Back to top