105041-7101 ZEXEL 9 430 615 153 BOSCH NOZZLE-HOLDER 9430615153 1050417101 6162133711

Information nozzle-holder

BOSCH 9 430 615 153 9430615153

ZEXEL 105041-7101 1050417101

KOMATSU 6162133711 6162133711

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy NOZZLE-HOLDER 105041-7101 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

2.	[2]	150508-3300	BEARING PIN
3.	[2]	150508-4300	BEARING PIN
4.	[1]	150510-0700	STOP PIN
6.	[1]	150562-4500	COMPRESSION SPRING
12/1.	[1]	150523-5000	SHIM D11.5&4.5T0.50
12/1.	[1]	150523-5100	SHIM D11.5&4.5T0.52
12/1.	[1]	150523-5200	SHIM D11.5&4.5T0.54
12/1.	[1]	150523-5300	SHIM D11.5&4.5T0.56
12/1.	[1]	150523-5400	SHIM D11.5&4.5T0.58
12/1.	[1]	150523-5500	SHIM D11.5&4.5T0.60
12/1.	[1]	150523-5600	SHIM D11.5&4.5T0.62
12/1.	[1]	150523-5700	SHIM D11.5&4.5T0.64
12/1.	[1]	150523-5800	SHIM D11.5&4.5T0.66
12/1.	[1]	150523-5900	SHIM D11.5&4.5T0.68
12/1.	[1]	150523-6000	SHIM D11.5&4.5T0.70
12/1.	[1]	150523-6100	SHIM D11.5&4.5T0.72
12/1.	[1]	150523-6200	SHIM D11.5&4.5T0.74
12/1.	[1]	150523-6300	SHIM D11.5&4.5T0.76
12/1.	[1]	150523-6400	SHIM D11.5&4.5T0.78
12/1.	[1]	150523-6500	SHIM D11.5&4.5T0.80
12/1.	[1]	150523-6600	SHIM D11.5&4.5T0.82
12/1.	[1]	150523-6700	SHIM D11.5&4.5T0.84
12/1.	[1]	150523-6800	SHIM D11.5&4.5T0.86
12/1.	[1]	150523-6900	SHIM D11.5&4.5T0.88
12/1.	[1]	150523-7000	SHIM D11.5&4.5T0.90
12/1.	[1]	150523-7100	SHIM D11.5&4.5T0.92
12/1.	[1]	150523-7200	SHIM D11.5&4.5T0.94
12/1.	[1]	150523-7300	SHIM D11.5&4.5T0.96
12/1.	[1]	150523-7400	SHIM D11.5&4.5T0.98
12/1.	[1]	150523-7500	SHIM D11.5&4.5T1.00
12/1.	[1]	150523-7600	SHIM D11.5&4.5T1.02
12/1.	[1]	150523-7700	SHIM D11.5&4.5T1.04
12/1.	[1]	150523-7800	SHIM D11.5&4.5T1.06
12/1.	[1]	150523-7900	SHIM D11.5&4.5T1.08
12/1.	[1]	150523-8000	SHIM D11.5&4.5T1.10
12/1.	[1]	150523-8100	SHIM D11.5&4.5T1.12
12/1.	[1]	150523-8200	SHIM D11.5&4.5T1.14
12/1.	[1]	150523-8300	SHIM D11.5&4.5T1.16
12/1.	[1]	150523-8400	SHIM D11.5&4.5T1.18
12/1.	[1]	150523-8500	SHIM D11.5&4.5T1.20
12/1.	[1]	150523-8600	SHIM D11.5&4.5T1.22
12/1.	[1]	150523-8700	SHIM D11.5&4.5T1.24
12/1.	[1]	150523-8800	SHIM D11.5&4.5T1.26
12/1.	[1]	150523-8900	SHIM D11.5&4.5T1.28
12/1.	[1]	150523-9000	SHIM D11.5&4.5T1.30
12/1.	[1]	150523-9100	SHIM D11.5&4.5T1.32
12/1.	[1]	150523-9200	SHIM D11.5&4.5T1.34
12/1.	[1]	150523-9300	SHIM D11.5&4.5T1.36
12/1.	[1]	150523-9400	SHIM D11.5&4.5T1.38
12/1.	[1]	150523-9500	SHIM D11.5&4.5T1.40
12/1.	[1]	150523-9600	SHIM D11.5&4.5T1.42
12/1.	[1]	150523-9700	SHIM D11.5&4.5T1.44
12/1.	[1]	150523-9800	SHIM D11.5&4.5T1.46
12/1.	[1]	150523-9900	SHIM D11.5&4.5T1.48
12/1.	[1]	150530-0000	SHIM D11.5&4.5T1.50
12/1.	[1]	150530-0100	SHIM D11.5&4.5T1.52
12/1.	[1]	150530-0200	SHIM D11.5&4.5T1.54
13.	[1]	150524-3400	SPACER BUSHING
20.	[1]	150651-5200	NOZZLE-RETAINING NUT
37.	[1]	150628-1900	FLANGE BUSHING

Include in #1:

103662-3300 as NOZZLE-HOLDER

Cross reference number

Zexel num

Bosch num

Firm num

Name

105041-7101
105041-7102

9 430 615 153

6162133711 KOMATSU

NOZZLE-HOLDER
* K 53LZ NH NH

Information:

MAIN BEARINGS
1. Bolt (partially hidden under oil pump). 2. Front cover. 3. Oil pump. 4. Bolts (two per cap). 5. Main bearing cap.
ADAPTER
6. 8S5131 Adpater.4. Use a commercially available bearing removal tool to roll out upper halves of main bearings.Install Main Bearings
1. Use a commercially available bearing removal tool to install the upper halves of the main bearings. Lubricate with clean engine oil (SAE 30) before installing. The main bearing half with the oil hole is the upper half. Be sure to install correctly.2. Lubricate lower halves of main bearings with engine oil (SAE 30). Install main bearing caps (5) so number on cap corresponds with number on saddle of cylinder block. Both numbers must be on same side of block.3. Put engine oil on the threads of the bolts and the face of the washers and install bolts (4) into the cylinder block.4. Use adapter (6) to install bolt (1) when front cover (2) and oil pump (3) are mounted on cylinder block. For 1140 (36B1-36B1923), 1145 (97B1-97B6154), 1150 (96B1-96B6580), 1160 (95B1-95B13691) Engines, install bolt (1) using a 9S7353 Torque Wrench with an 8S5131 Adapter. Do not tighten bolt (1) at this time. Tighten bolt (1) in the number sequence shown with the other bolts but tighten it to a first torque of 48 lb. ft. (6.6 mkg) and a last torque of 140 lb. ft. (19.4 mkg). See Step 5 for torque of the other bolts.For 1140 (36B1924-Up), 1145 (97B6155-Up), 1150 (96B6581-Up), 1160 (95B13692-Up) Engines, install bolt (1) using a 9S7353 Torque Wrench with an 8S5131 Adapter. Do not tighten bolt (1) at this time. Tighten bolt (1) in the number sequence shown with the other bolts but tighten it to a first torque of 24 lb. ft. (3.3 mkg). Put a mark on the bolt and cap. Tighten the bolt an added 120° 5° from the mark. See Step 6 for torque of the other bolts.
MAIN BEARINGS
1. Bolt (partially hidden under oil pump). 2. Front cover. 3. Oil pump. 4. Bolts (two per cap). 5. Main bearing cap.
ADAPTER
6. 8S5131 Adapter.5. Tighten the bolts for the main bearing caps in the number sequence shown to a first torque of 60 15 lb. ft. (8.3 2.1 mkg). Tighten all bolts in the number sequence shown (hand torque only) to a last torque of 175 10 lb. ft. (24.2 1.4 mkg).
BOLT TIGHTENING SEQUENCE6. Tighten the bolts for the main bearing caps in the number sequence shown to a first torque of 30 3 lb. ft. (4.1 0.4 mkg). Put a mark on each bolt and cap and tighten, in the number sequence shown, an added 120° 5° from the mark.