105041-7030 ZEXEL 9 430 615 152 BOSCH NOZZLE-HOLDER 9430615152 1050417030 6151113110

Information nozzle-holder

BOSCH 9 430 615 152 9430615152

ZEXEL 105041-7030 1050417030

KOMATSU 6151113110 6151113110

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy NOZZLE-HOLDER 105041-7030 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

3.	[2]	150525-1701	BEARING PIN
4.	[1]	150550-4700	STOP PIN
6.	[1]	150562-5000	COMPRESSION SPRING
12/1.	[1]	150530-4000	SHIM D10.3&4.5T0.5
12/1.	[1]	150530-4100	SHIM D10.3&4.5T0.525
12/1.	[1]	150530-4200	SHIM D10.3&4.5T0.55
12/1.	[1]	150530-4300	SHIM D10.3&4.5T0.575
12/1.	[1]	150530-4400	SHIM D10.3&4.5T0.6
12/1.	[1]	150530-4500	SHIM D10.3&4.5T0.625
12/1.	[1]	150530-4600	SHIM D10.3&4.5T0.65
12/1.	[1]	150530-4700	SHIM D10.3&4.5T0.675
12/1.	[1]	150530-4800	SHIM D10.3&4.5T0.7
12/1.	[1]	150530-4900	SHIM D10.3&4.5T0.725
12/1.	[1]	150530-5000	SHIM D10.3&4.5T0.75
12/1.	[1]	150530-5100	SHIM D10.3&4.5T0.775
12/1.	[1]	150530-5200	SHIM D10.3&4.5T0.8
12/1.	[1]	150530-5300	SHIM D10.3&4.5T0.825
12/1.	[1]	150530-5400	SHIM D10.3&4.5T0.85
12/1.	[1]	150530-5500	SHIM D10.3&4.5T0.875
12/1.	[1]	150530-5600	SHIM D10.3&4.5T0.9
12/1.	[1]	150530-5700	SHIM D10.3&4.5T0.925
12/1.	[1]	150530-5800	SHIM D10.3&4.5T0.95
12/1.	[1]	150530-5900	SHIM D10.3&4.5T0.975
12/1.	[1]	150530-6000	SHIM D10.3&4.5T1.0
12/1.	[1]	150530-6100	SHIM D10.3&4.5T1.025
12/1.	[1]	150530-6200	SHIM D10.3&4.5T1.05
12/1.	[1]	150530-6300	SHIM D10.3&4.5T1.075
12/1.	[1]	150530-6400	SHIM D10.3&4.5T1.1
12/1.	[1]	150530-6500	SHIM D10.3&4.5T1.125
12/1.	[1]	150530-6600	SHIM D10.3&4.5T1.15
12/1.	[1]	150530-6700	SHIM D10.3&4.5T1.175
12/1.	[1]	150530-6800	SHIM D10.3&4.5T1.2
12/1.	[1]	150530-6900	SHIM D10.3&4.5T1.225
12/1.	[1]	150530-7000	SHIM D10.3&4.5T1.25
12/1.	[1]	150530-7100	SHIM D10.3&4.5T1.275
12/1.	[1]	150530-7200	SHIM D10.3&4.5T1.3
12/1.	[1]	150530-7300	SHIM D10.3&4.5T1.325
12/1.	[1]	150530-7400	SHIM D10.3&4.5T1.35
12/1.	[1]	150530-7500	SHIM D10.3&4.5T1.375
12/1.	[1]	150530-7600	SHIM D10.3&4.5T1.4
12/1.	[1]	150530-7700	SHIM D10.3&4.5T1.425
12/1.	[1]	150530-7800	SHIM D10.3&4.5T1.45
12/1.	[1]	150530-7900	SHIM D10.3&4.5T1.475
12/1.	[1]	150530-8000	SHIM D10.3&4.5T1.5
12/1.	[1]	150530-8100	SHIM D10.3&4.5T1.525
12/1.	[1]	150530-8200	SHIM D10.3&4.5T1.55
12/1.	[1]	150530-8300	SHIM D10.3&4.5T1.575
12/1.	[1]	150530-8400	SHIM D10.3&4.5T1.6
12/1.	[1]	150530-8500	SHIM D10.3&4.5T1.625
12/1.	[1]	150530-8600	SHIM D10.3&4.5T1.65
12/1.	[1]	150530-8700	SHIM D10.3&4.5T1.675
12/1.	[1]	150530-8800	SHIM D10.3&4.5T1.7
12/1.	[1]	150530-8900	SHIM D10.3&4.5T1.725
12/1.	[1]	150530-9000	SHIM D10.3&4.5T1.75
12/1.	[1]	150530-9100	SHIM D10.3&4.5T1.775
12/1.	[1]	150530-9200	SHIM D10.3&4.5T1.8
12/1.	[1]	150530-9300	SHIM D10.3&4.5T1.825
12/1.	[1]	150530-9400	SHIM D10.3&4.5T1.85
12/1.	[1]	150530-9500	SHIM D10.3&4.5T1.875
12/1.	[1]	150530-9600	SHIM D10.3&4.5T1.9
12/1.	[1]	150530-9700	SHIM D10.3&4.5T1.925
12/1.	[1]	150530-9800	SHIM D10.3&4.5T1.95
12/1.	[1]	150530-9900	SHIM D10.3&4.5T1.975
13.	[1]	150524-4100	SPACER BUSHING
20.	[1]	150650-8400	NOZZLE-RETAINING NUT
21.	[1]	029300-5070	GASKET D12&5T1
22.	[1]	150645-6800	INLET UNION
30.	[1]	029730-8350	EYE BOLT
31.	[2]	029340-8110	GASKET

Cross reference number

Zexel num

Bosch num

Firm num

Name

105041-7030

9 430 615 152

6151113110 KOMATSU

NOZZLE-HOLDER
K 53LZ NOZZLE HOLDER NH NH

Information:

MOVING WATER SLEEVES
1. 8S6692 Water Sleeve Tool.5. Disconnect oil cooler water outlet elbow at back side of timing gear cover.6. Remove bolts securing front support to frame.7. Raise the front of the engine 1 in. (25.4 mm) and block under the engine.
Never support the engine by placing blocking under the oil pan. Damage to the oil pan or suction bell will result.
8. Remove engine front support. Remove timing gear cover retaining bolts. These bolts vary in length. Mark each bolt and its location for correct installation.9. Install two 1P7406 Lifting Eye Bolts in timing gear cover. Attach a hoist and pry timing gear cover off dowels in cylinder block. Remove the timing gear cover, the weight is approx. 85 lbs. (40 kg).
REMOVING TIMING GEAR COVER
2. Timing gear cover.Install Timing Gear Cover
1. Clean all gasket surfaces on timing gear cover and cylinder block. Clean water sleeve bores in cylinder heads and inspect and lubricate O-rings before installing.2. Install timing gear cover gasket. Install water sleeves in timing gear cover before installing cover. Replacement water sleeves are color coded to insure that new sleeves have the correct sized orifice to control coolant flow in the different engines. The 1140, 1145, and 1150 Series [4.1 in. (104.1 mm) and 4.5 in. (114.3 mm) stroke] use a silver code. The 1160 [5.0 in. (127.0 mm) stroke] uses a gold code.3. Install two 1P7406 Lifting Eye Bolts in timing gear cover. Attach hoist and position cover on engine. Make sure the oil pump gear teeth and the crankshaft gear teeth mesh.4. Install the timing gear cover retaining bolts.5. Connect oil cooler water outlet elbow to back side of timing gear cover.6. Trim the timing gear cover gasket flush with bottom face of cylinder block. Gaskets not cut square and flush with oil pan face will leak.7. Use an 8S6692 Water Sleeve Tool to slide water sleeves into cylinder heads and install clamps.8. Install front support. Remove blocking from beneath engine and lower engine into position. Install and tighten front support-to-frame mounting bolts.9. Lubricate the lip of the crankshaft front seal with clean engine oil (SAE 30). Install the crankshaft pulley.10. Install oil pump suction bell, oil pan gasket and oil pan. Tighten oil pan retaining bolts to 17 3 lb. ft. (2.4 0.4 mkg).11. Connect water temperature sending unit. Install tachometer drive housing and connect tachometer drive cable.12. Install the power steering pump, vacuum pump, alternator, radiator and all other components that were removed or disconnected.13. Fill the cooling system and lubricating system to the correct levels.