105041-5190 ZEXEL 9 430 615 445 BOSCH NOZZLE-HOLDER 9430615445 1050415190 236202710a

Information nozzle-holder

BOSCH 9 430 615 445 9430615445

ZEXEL 105041-5190 1050415190

HINO 236202710A 236202710a

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy NOZZLE-HOLDER 105041-5190 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

2.	[2]	150508-3300	BEARING PIN
3.	[2]	150525-1701	BEARING PIN
4.	[1]	150550-4700	STOP PIN
6.	[1]	150562-1700	COMPRESSION SPRING
12/1.	[1]	150530-4000	SHIM D10.3&4.5T0.5
12/1.	[1]	150530-4100	SHIM D10.3&4.5T0.525
12/1.	[1]	150530-4200	SHIM D10.3&4.5T0.55
12/1.	[1]	150530-4300	SHIM D10.3&4.5T0.575
12/1.	[1]	150530-4400	SHIM D10.3&4.5T0.6
12/1.	[1]	150530-4500	SHIM D10.3&4.5T0.625
12/1.	[1]	150530-4600	SHIM D10.3&4.5T0.65
12/1.	[1]	150530-4700	SHIM D10.3&4.5T0.675
12/1.	[1]	150530-4800	SHIM D10.3&4.5T0.7
12/1.	[1]	150530-4900	SHIM D10.3&4.5T0.725
12/1.	[1]	150530-5000	SHIM D10.3&4.5T0.75
12/1.	[1]	150530-5100	SHIM D10.3&4.5T0.775
12/1.	[1]	150530-5200	SHIM D10.3&4.5T0.8
12/1.	[1]	150530-5300	SHIM D10.3&4.5T0.825
12/1.	[1]	150530-5400	SHIM D10.3&4.5T0.85
12/1.	[1]	150530-5500	SHIM D10.3&4.5T0.875
12/1.	[1]	150530-5600	SHIM D10.3&4.5T0.9
12/1.	[1]	150530-5700	SHIM D10.3&4.5T0.925
12/1.	[1]	150530-5800	SHIM D10.3&4.5T0.95
12/1.	[1]	150530-5900	SHIM D10.3&4.5T0.975
12/1.	[1]	150530-6000	SHIM D10.3&4.5T1.0
12/1.	[1]	150530-6100	SHIM D10.3&4.5T1.025
12/1.	[1]	150530-6200	SHIM D10.3&4.5T1.05
12/1.	[1]	150530-6300	SHIM D10.3&4.5T1.075
12/1.	[1]	150530-6400	SHIM D10.3&4.5T1.1
12/1.	[1]	150530-6500	SHIM D10.3&4.5T1.125
12/1.	[1]	150530-6600	SHIM D10.3&4.5T1.15
12/1.	[1]	150530-6700	SHIM D10.3&4.5T1.175
12/1.	[1]	150530-6800	SHIM D10.3&4.5T1.2
12/1.	[1]	150530-6900	SHIM D10.3&4.5T1.225
12/1.	[1]	150530-7000	SHIM D10.3&4.5T1.25
12/1.	[1]	150530-7100	SHIM D10.3&4.5T1.275
12/1.	[1]	150530-7200	SHIM D10.3&4.5T1.3
12/1.	[1]	150530-7300	SHIM D10.3&4.5T1.325
12/1.	[1]	150530-7400	SHIM D10.3&4.5T1.35
12/1.	[1]	150530-7500	SHIM D10.3&4.5T1.375
12/1.	[1]	150530-7600	SHIM D10.3&4.5T1.4
12/1.	[1]	150530-7700	SHIM D10.3&4.5T1.425
12/1.	[1]	150530-7800	SHIM D10.3&4.5T1.45
12/1.	[1]	150530-7900	SHIM D10.3&4.5T1.475
12/1.	[1]	150530-8000	SHIM D10.3&4.5T1.5
12/1.	[1]	150530-8100	SHIM D10.3&4.5T1.525
12/1.	[1]	150530-8200	SHIM D10.3&4.5T1.55
12/1.	[1]	150530-8300	SHIM D10.3&4.5T1.575
12/1.	[1]	150530-8400	SHIM D10.3&4.5T1.6
12/1.	[1]	150530-8500	SHIM D10.3&4.5T1.625
12/1.	[1]	150530-8600	SHIM D10.3&4.5T1.65
12/1.	[1]	150530-8700	SHIM D10.3&4.5T1.675
12/1.	[1]	150530-8800	SHIM D10.3&4.5T1.7
12/1.	[1]	150530-8900	SHIM D10.3&4.5T1.725
12/1.	[1]	150530-9000	SHIM D10.3&4.5T1.75
12/1.	[1]	150530-9100	SHIM D10.3&4.5T1.775
12/1.	[1]	150530-9200	SHIM D10.3&4.5T1.8
12/1.	[1]	150530-9300	SHIM D10.3&4.5T1.825
12/1.	[1]	150530-9400	SHIM D10.3&4.5T1.85
12/1.	[1]	150530-9500	SHIM D10.3&4.5T1.875
12/1.	[1]	150530-9600	SHIM D10.3&4.5T1.9
12/1.	[1]	150530-9700	SHIM D10.3&4.5T1.925
12/1.	[1]	150530-9800	SHIM D10.3&4.5T1.95
12/1.	[1]	150530-9900	SHIM D10.3&4.5T1.975
13.	[1]	150524-4300	SPACER BUSHING
20.	[1]	150651-1800	NOZZLE-RETAINING NUT
21.	[1]	029300-3100	GASKET
22.	[1]	150645-7300	INLET UNION
23.	[1]	150619-0500	SEAL RING
30.	[1]	150613-1801	EYE BOLT
31.	[2]	150623-6400	GASKET
34.	[1]	150640-3900	LOCKING WASHER
800S.	[1]	150613-1801	EYE BOLT
801S.	[2]	150623-6400	GASKET

Include in #1:

101401-2371 as NOZZLE-HOLDER

Cross reference number

Zexel num

Bosch num

Firm num

Name

105041-5190

9 430 615 445

236202710A HINO

NOZZLE-HOLDER
K 53LZ NOZZLE HOLDER NH NH

Information:

TIMING PIN HOLE PLUG (Typical Example)
1. Plug.2. Rotate the crankshaft CLOCKWISE (as viewed from front of engine) until the timing pin drops into the timing slot in the fuel injection pump camshaft.3. Disconnect wire (2) from fuel shut off solenoid.4. Remove the tachometer drive adapter housing (3).
WIRE AND HOUSING (Typical Example)
2. Wire. 3. Tachometer drive adapter housing.5. Use ratchet (4) and socket (5) to remove the tachometer drive adapter shaft.
REMOVING SHAFT
4. 8H8572 Ratchet. 5. 9S5031 Deep Well Socket.6. Using puller group (6), thread the 9S8528 Bolt Assembly into the camshaft. Do not force the bolt assembly. It should thread easily. Install the 9S8527 Bolt by threading it into the gear carrier or adapter. Then tighten the 9S8527 Bolt with a wrench until the gear carrier or adapter "pops" loose. Remove the 9S8520 Puller Group.
LOOSENING CAMSHAFT DRIVE GEAR
6. 9S8520 Puller Group.7. Remove the plug from the timing hole (8) in the front cover and insert bolt (7). The cover retaining bolt from hole (9) may be used.8. Rotate crankshaft CLOCKWISE (as viewed from front of engine) until bolt (7) threads into the timing gear and is centered in timing hole (8). With timing pin in slot in fuel pump camshaft and the bolt (7) through the front cover and threaded into the timing gear, the fuel injection pump camshaft is timed to the engine.
INSTALLING BOLT
7. 1D4539 Bolt [5/16 in. - 18 NC, 2.5 in. (63.5 mm) long]. 8. Timing hole. 9. Hole.9. Remove the fuel injection pump housing retaining bolts (10).
RETAINING BOLTS (Typical Example)
10. Retaining bolts (three).
REMOVING HOUSING (Typical Example)10. Attach a hoist and remove the fuel injection pump housing and governor as a unit, the weight is approx. 55 lbs. (23 kg).Install Fuel Injection Pump Housing and Governor
1. Attach a hoist and install the fuel injection pump housing and governor as a unit. Install the fuel injection pump housing retaining bolts.2. Install the tachometer drive adapter shaft and tighten shaft retaining nut to 32 2 lb. ft. (4.4 0.3 mkg).3. To check timing remove the timing pin and the bolt. Rotate the crankshaft two revolutions CLOCKWISE (as viewed from front of engine) and install the timing pin and bolt back in place. If the timing pin or bolt can not be installed, the fuel injection pump camshaft must be retimed.4. Remove the bolt (7) from the timing gear and install in hole (9). Install the plug into timing hole (8).5. Remove the timing pin from the timing slot in the fuel injection pump camshaft and install the plug in the timing hole.6. Install the tachometer drive adapter housing. Connect the wire to the fuel shut off solenoid.