105041-4161 ZEXEL 9 430 616 234 BOSCH NOZZLE-HOLDER 9430616234 1050414161

Information nozzle-holder

BOSCH 9 430 616 234 9430616234

ZEXEL 105041-4161 1050414161

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy NOZZLE-HOLDER 105041-4161 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

8.	[1]	150562-6500	COMPRESSION SPRING
10.	[1]	150560-2001	SLOTTED WASHER
11.	[1]	150624-2000	BUSHING
12.	[1]	150562-6600	COMPRESSION SPRING
15.	[1]	150560-2100	SLOTTED WASHER
16.	[2]	150525-1701	BEARING PIN
18.	[1]	150524-6700	SPACER BUSHING
19.	[2]	150508-3300	BEARING PIN
22.	[1]	150651-5900	NOZZLE-RETAINING NUT
40.	[2]	139508-0000	GASKET D13.2&8.2T1
42.	[1]	139808-0000	EYE BOLT
800S/1.	[1]	150539-0700	SHIM D8.9&3.8T0.40
800S/1.	[1]	150539-0800	SHIM D8.9&3.8T0.50
800S/1.	[1]	150539-0900	SHIM D8.9&3.8T0.52
800S/1.	[1]	150539-1000	SHIM D8.9&3.8T0.54
800S/1.	[1]	150539-1100	SHIM D8.9&3.8T0.56
800S/1.	[1]	150539-1200	SHIM D8.9&3.8T0.58
800S/1.	[1]	150539-1300	SHIM D8.9&3.8T0.60
800S/1.	[1]	150539-1400	SHIM D8.9&3.8T0.70
801S/1.	[1]	150590-0600	SHIM D9.9&4.8T0.40
801S/1.	[1]	150590-0700	SHIM D9.9&4.8T0.50
801S/1.	[1]	150590-0800	SHIM D9.9&4.8T0.52
801S/1.	[1]	150590-0900	SHIM D9.9&4.8T0.54
801S/1.	[1]	150590-1000	SHIM D9.9&4.8T0.56
801S/1.	[1]	150590-1100	SHIM D9.9&4.8T0.58
801S/1.	[1]	150590-1200	SHIM D9.9&4.8T0.60
801S/1.	[1]	150590-1300	SHIM D9.9&4.8T0.70
802S.	[0]	150583-0000	STOP PIN L36.06

Include in #1:

108622-1030 as NOZZLE-HOLDER

Cross reference number

Zexel num

Bosch num

Firm num

Name

105041-4161

9 430 616 234

NOZZLE-HOLDER
K 53LZ NOZZLE HOLDER NH NH

Information:

2. Disconnect air compressor line (2) and fuel ratio control line (3) from the aftercooler housing.3. Remove four bolts (1), nuts and cover that connect the inlet pipe to the aftercooler housing. 4. Put a mark on the turbocharger compressor housing in alignment with a mark on the turbocharger cartridge housing. Loosen the bolts for the turbocharger compressor housing. Turn the housing so air inlet pipe (4) is away from the aftercooler housing.5. Remove bolts (5) that hold the aftercooler housing to the cylinder head.6. Fasten a hoist to the aftercooler housing and remove the aftercooler housing from the engine. Weight is 95 lb. (43 kg).Install Aftercooler Housing
1. Install new O-ring seals on the aftercooler water inlet and outlet pipes. 2. Fasten a hoist to aftercooler housing (1) and put the aftercooler housing in position on the water pipes and cylinder head.3. Put 9S3263 Thread Lock on the threads of the bolts and install the bolts that hold the aftercooler housing to the cylinder head. 4. Turn the turbocharger compressor housing carefully so the mark on the housing is in alignment with the mark on the turbocharger cartridge housing. Tighten bolts (2) for the compressor housing to 105 5 lb.in. (11.9 0.6 N m).
Do not cause damage to the O-ring seal between the turbocharger compressor housing and the cartridge housing.
5. Install the four bolts and nuts that connect the air inlet pipe to the aftercooler housing.6. Connect the air compressor line and fuel ratio control line.7. Fill engine with coolant.end by:a) install fuel filter base