105041-4141 ZEXEL 9 430 616 232 BOSCH NOZZLE-HOLDER 9430616232 1050414141 8943909841

Information nozzle-holder

BOSCH 9 430 616 232 9430616232

ZEXEL 105041-4141 1050414141

ISUZU 8943909841 8943909841

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy NOZZLE-HOLDER 105041-4141 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

8.	[1]	150562-6500	COMPRESSION SPRING
10.	[1]	150560-2001	SLOTTED WASHER
11.	[1]	150624-2000	BUSHING
12.	[1]	150562-6600	COMPRESSION SPRING
15.	[1]	150560-2100	SLOTTED WASHER
16.	[2]	150525-1701	BEARING PIN
17.	[1]	150575-7720	LIFT PIECE
18.	[1]	150524-6700	SPACER BUSHING
19.	[2]	150508-3300	BEARING PIN
22.	[1]	150651-6400	NOZZLE-RETAINING NUT
800S/1.	[1]	150539-0700	SHIM D8.9&3.8T0.40
800S/1.	[1]	150539-0800	SHIM D8.9&3.8T0.50
800S/1.	[1]	150539-0900	SHIM D8.9&3.8T0.52
800S/1.	[1]	150539-1000	SHIM D8.9&3.8T0.54
800S/1.	[1]	150539-1100	SHIM D8.9&3.8T0.56
800S/1.	[1]	150539-1200	SHIM D8.9&3.8T0.58
800S/1.	[1]	150539-1300	SHIM D8.9&3.8T0.60
800S/1.	[1]	150539-1400	SHIM D8.9&3.8T0.70
801S/1.	[1]	150590-0600	SHIM D9.9&4.8T0.40
801S/1.	[1]	150590-0700	SHIM D9.9&4.8T0.50
801S/1.	[1]	150590-0800	SHIM D9.9&4.8T0.52
801S/1.	[1]	150590-0900	SHIM D9.9&4.8T0.54
801S/1.	[1]	150590-1000	SHIM D9.9&4.8T0.56
801S/1.	[1]	150590-1100	SHIM D9.9&4.8T0.58
801S/1.	[1]	150590-1200	SHIM D9.9&4.8T0.60
801S/1.	[1]	150590-1300	SHIM D9.9&4.8T0.70
802S.	[0]	150583-0000	STOP PIN L36.06

Include in #1:

106693-6203 as NOZZLE-HOLDER

106693-6223

106693-6233

Cross reference number

Zexel num

Bosch num

Firm num

Name

105041-4141

9 430 616 232

8943909841 ISUZU

NOZZLE-HOLDER
K 53LZ NOZZLE HOLDER NH NH

Information:

Remove Fuel Ratio Control
1. Disconnect line (1) from the fuel ratio control.2. Remove the wire seal from the bolts.3. Remove two bolts (2). Remove fuel ratio control (3) after it is moved down and out from the collar.Install Fuel Ratio Control
1. Put the fuel ratio control on the governor. 2. Be sure bolt (2) of the fuel ratio control is connected in the groove of collar (1).3. Install the two bolts that hold the fuel ratio control on the governor.4. Connect the line to the fuel ratio control.5. Install a wire seal on the bolts.Disassemble Fuel Ratio Control
start by:a) remove fuel ratio control 1. Remove the bolts and the housing (1).2. Remove wire seal (2) from the bolts. 3. Remove valve assembly (3).4. Remove seal (4) and O-ring seal from valve.5. Remove the retainer (5) and two springs (6). 6. Remove three bolts (9) and cover (10).7. Remove valve (7), diaphragm (8), retainer and spring. 8. Remove pin (12) from valve (7).9. Remove cover (11) from the valve.10. Remove the seal from the cover (11).Assemble Fuel Ratio Control
1. Put clean engine oil on lip of seal. Install the seal (1) in cover (2). Install seal so lip of seal is toward the inside of the cover. 2. Install the valve (3) into cover (2).3. Install the pin that holds cover on valve. 4. Install spring (7) and the retainer (6) in cover (8).5. Install diaphragm (5) on the valve assembly (4) and in the cover. 6. Install cover and three bolts (11) that hold covers together. Install wire seal on the bolts with tool group (A) after the fuel ratio control is installed and adjustments are made to it.7. Put clean engine oil on seal and ring seal. Install the seals (1) on valve.8. Install the two springs (13), retainer, and valve assembly (12).9. Install housing (9) and two bolts.end by: a) install fuel ratio control