105041-3090 ZEXEL 9 430 615 891 BOSCH NOZZLE-HOLDER 9430615891 1050413090 me731939


 

Information nozzle-holder

BOSCH 9 430 615 891 9430615891
ZEXEL 105041-3090 1050413090
MITSUBISHI ME731939 me731939
105041-3090 NOZZLE-HOLDER
Rating:
9
Buy NOZZLE-HOLDER 105041-3090 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

8. [1] 150562-6500 COMPRESSION SPRING
10. [1] 150560-2001 SLOTTED WASHER
11. [1] 150624-1800 BUSHING
12. [1] 150562-6600 COMPRESSION SPRING
15. [1] 150560-2100 SLOTTED WASHER
17. [1] 150575-7720 LIFT PIECE
18. [1] 150524-6200 SPACER BUSHING
19. [2] 150508-3300 BEARING PIN
19. [2] 150508-3300 BEARING PIN
22. [1] 150651-6500 NOZZLE-RETAINING NUT
40. [2] 026508-1240 GASKET D11.9&8.2T1
42. [1] 150613-1801 EYE BOLT
800S/1. [1] 150539-0700 SHIM D8.9&3.8T0.40
800S/1. [1] 150539-0800 SHIM D8.9&3.8T0.50
800S/1. [1] 150539-0900 SHIM D8.9&3.8T0.52
800S/1. [1] 150539-1000 SHIM D8.9&3.8T0.54
800S/1. [1] 150539-1100 SHIM D8.9&3.8T0.56
800S/1. [1] 150539-1200 SHIM D8.9&3.8T0.58
800S/1. [1] 150539-1300 SHIM D8.9&3.8T0.60
800S/1. [1] 150539-1400 SHIM D8.9&3.8T0.70
801S/1. [1] 150590-0600 SHIM D9.9&4.8T0.40
801S/1. [1] 150590-0700 SHIM D9.9&4.8T0.50
801S/1. [1] 150590-0800 SHIM D9.9&4.8T0.52
801S/1. [1] 150590-0900 SHIM D9.9&4.8T0.54
801S/1. [1] 150590-1000 SHIM D9.9&4.8T0.56
801S/1. [1] 150590-1100 SHIM D9.9&4.8T0.58
801S/1. [1] 150590-1200 SHIM D9.9&4.8T0.60
801S/1. [1] 150590-1300 SHIM D9.9&4.8T0.70
802S. [0] 150583-0000 STOP PIN L36.06

Cross reference number

Zexel num
Bosch num
Firm num
Name
105041-3090 
105041-3110 
9 430 615 891 
ME731939  MITSUBISHI
NOZZLE-HOLDER
* K




Information:

2. Disconnect hose assemblies (2) and (4) from BrakeSaver control valve (1).3. Remove the bolts that hold elbow (3) and tube assembly (5) to BrakeSaver control valve (1). 4. Remove the four bolts (6) and remove BrakeSaver control valve (1) from the engine.Install Brakesaver Control Valve
1. Install O-ring seals (2) in BrakeSaver control valve (1).2. Make sure the seals are in position in the tube assembly and elbow.3. Put BrakeSaver control valve (1) in position on the engine and install the four bolts and lockwashers that hold it. 4. Install the bolts that hold tube assembly (6) and elbow (3) to the BrakeSaver control valve.5. Connect hose assemblies (4) and (5) to the BrakeSaver control valve.6. Fill the engine with oil to the correct level. Disassemble Brakesaver Control Valve
start by: a) remove BrakeSaver control valve 1. Remove plug (1), the O-ring seal, spring and plunger from the valve body. 2. Remove the bolts that hold cover (2) and valve group (10) in position. Remove cover (2), O-ring seal (3), valve group (10), gasket (9), slug (8), spring (7), stop (6), spring (5) and valve spool (4) from the valve body.3. Disassemble valve group (10) as follows: a) Remove the two plugs and O-ring seals from the ends of the valve body.b) Remove the two slugs and valve spool from the valve body.Assemble Brakesaver Control Valve
1. Install valve spool (3), slugs (2) and (5), the O-ring seals and plugs (1) and (6) in valve body (4) as shown. 2. Install the plunger, spring, O-ring seal and plug (16) in valve body (9).3. Install O-ring seal (8) and cover (7) on valve body (9).4. Install valve spool (10), spring (11), stop (12), spring (13) and slug (14) in valve body (9).5. Put gasket (15) and valve body (4) in position on valve body (9) and install the bolts to hold it.end by: a) install BrakeSaver control valve

Have questions with 105041-3090?





Group cross 105041-3090 ZEXEL

Hino 

9 430 615 886 
1153301140 
NOZZLE-HOLDER
9 430 615 298 
 
NOZZLE-HOLDER

Isuzu 

9 430 615 896 
1153301051 
NOZZLE-HOLDER
9 430 615 362 
1153300990 
NOZZLE-HOLDER
9 430 615 879 
1153300990 
1153300991 
NOZZLE-HOLDER
9 430 615 879 
1153300990 
1153300990 
NOZZLE-HOLDER

Mitsubishi 

9 430 615 888 
ME730862 
NOZZLE-HOLDER
9 430 615 267 
 
NOZZLE-HOLDER

Mitsubishi 

9 430 615 757 
ME730912 
ME730912 
NOZZLE-HOLDER
9 430 615 889 
ME731884 
NOZZLE-HOLDER
9 430 615 390 
 
NOZZLE-HOLDER

Nissan-Diesel 

9 430 615 236 
1661097009 
NOZZLE-HOLDER

Isuzu 

9 430 615 299 
1153301060 
NOZZLE-HOLDER
9 430 616 230 
1153301061 
NOZZLE-HOLDER
9 430 615 300 
1153301131 
NOZZLE-HOLDER
9 430 615 300 
1153301040 
NOZZLE-HOLDER
9 430 615 301 
1153301130 
NOZZLE-HOLDER
9 430 615 890 
1153301130 
1153301041 
NOZZLE-HOLDER
9 430 615 890 
1153301130 
1153301130 
NOZZLE-HOLDER
9 430 615 417 
1153301050 
NOZZLE-HOLDER
9 430 615 302 
 
NOZZLE-HOLDER

Isuzu 

9 430 615 764 
1153301140 
1153301140 
NOZZLE-HOLDER

Mitsubishi 

105041-3090  

105041-3110 
9 430 615 891 
ME731939 
NOZZLE-HOLDER
Back to top