105041-1121 ZEXEL 9 430 615 014 BOSCH NOZZLE-HOLDER 9430615014 1050411121 16610v0701

Information nozzle-holder

BOSCH 9 430 615 014 9430615014

ZEXEL 105041-1121 1050411121

NISSAN 16610V0701 16610v0701

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy NOZZLE-HOLDER 105041-1121 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

4.	[1]	150510-0700	STOP PIN
6.	[1]	150562-3100	COMPRESSION SPRING
12/1.	[1]	150523-5000	SHIM D11.5&4.5T0.50
12/1.	[1]	150523-5100	SHIM D11.5&4.5T0.52
12/1.	[1]	150523-5200	SHIM D11.5&4.5T0.54
12/1.	[1]	150523-5300	SHIM D11.5&4.5T0.56
12/1.	[1]	150523-5400	SHIM D11.5&4.5T0.58
12/1.	[1]	150523-5500	SHIM D11.5&4.5T0.60
12/1.	[1]	150523-5600	SHIM D11.5&4.5T0.62
12/1.	[1]	150523-5700	SHIM D11.5&4.5T0.64
12/1.	[1]	150523-5800	SHIM D11.5&4.5T0.66
12/1.	[1]	150523-5900	SHIM D11.5&4.5T0.68
12/1.	[1]	150523-6000	SHIM D11.5&4.5T0.70
12/1.	[1]	150523-6100	SHIM D11.5&4.5T0.72
12/1.	[1]	150523-6200	SHIM D11.5&4.5T0.74
12/1.	[1]	150523-6300	SHIM D11.5&4.5T0.76
12/1.	[1]	150523-6400	SHIM D11.5&4.5T0.78
12/1.	[1]	150523-6500	SHIM D11.5&4.5T0.80
12/1.	[1]	150523-6600	SHIM D11.5&4.5T0.82
12/1.	[1]	150523-6700	SHIM D11.5&4.5T0.84
12/1.	[1]	150523-6800	SHIM D11.5&4.5T0.86
12/1.	[1]	150523-6900	SHIM D11.5&4.5T0.88
12/1.	[1]	150523-7000	SHIM D11.5&4.5T0.90
12/1.	[1]	150523-7100	SHIM D11.5&4.5T0.92
12/1.	[1]	150523-7200	SHIM D11.5&4.5T0.94
12/1.	[1]	150523-7300	SHIM D11.5&4.5T0.96
12/1.	[1]	150523-7400	SHIM D11.5&4.5T0.98
12/1.	[1]	150523-7500	SHIM D11.5&4.5T1.00
12/1.	[1]	150523-7600	SHIM D11.5&4.5T1.02
12/1.	[1]	150523-7700	SHIM D11.5&4.5T1.04
12/1.	[1]	150523-7800	SHIM D11.5&4.5T1.06
12/1.	[1]	150523-7900	SHIM D11.5&4.5T1.08
12/1.	[1]	150523-8000	SHIM D11.5&4.5T1.10
12/1.	[1]	150523-8100	SHIM D11.5&4.5T1.12
12/1.	[1]	150523-8200	SHIM D11.5&4.5T1.14
12/1.	[1]	150523-8300	SHIM D11.5&4.5T1.16
12/1.	[1]	150523-8400	SHIM D11.5&4.5T1.18
12/1.	[1]	150523-8500	SHIM D11.5&4.5T1.20
12/1.	[1]	150523-8600	SHIM D11.5&4.5T1.22
12/1.	[1]	150523-8700	SHIM D11.5&4.5T1.24
12/1.	[1]	150523-8800	SHIM D11.5&4.5T1.26
12/1.	[1]	150523-8900	SHIM D11.5&4.5T1.28
12/1.	[1]	150523-9000	SHIM D11.5&4.5T1.30
12/1.	[1]	150523-9100	SHIM D11.5&4.5T1.32
12/1.	[1]	150523-9200	SHIM D11.5&4.5T1.34
12/1.	[1]	150523-9300	SHIM D11.5&4.5T1.36
12/1.	[1]	150523-9400	SHIM D11.5&4.5T1.38
12/1.	[1]	150523-9500	SHIM D11.5&4.5T1.40
12/1.	[1]	150523-9600	SHIM D11.5&4.5T1.42
12/1.	[1]	150523-9700	SHIM D11.5&4.5T1.44
12/1.	[1]	150523-9800	SHIM D11.5&4.5T1.46
12/1.	[1]	150523-9900	SHIM D11.5&4.5T1.48
12/1.	[1]	150530-0000	SHIM D11.5&4.5T1.50
12/1.	[1]	150530-0100	SHIM D11.5&4.5T1.52
12/1.	[1]	150530-0200	SHIM D11.5&4.5T1.54
13.	[1]	150524-0600	SPACER BUSHING
20.	[1]	150601-5001	NOZZLE-RETAINING NUT
21.	[1]	029300-5070	GASKET D12&5T1
22.	[1]	150644-8900	INLET UNION
30.	[1]	150613-1700	EYE BOLT
31.	[2]	026508-1240	GASKET D11.9&8.2T1

Include in #2:

104740-2002 as NOZZLE-HOLDER

Cross reference number

Zexel num

Bosch num

Firm num

Name

105041-1121

9 430 615 014

16610V0701 NISSAN

NOZZLE-HOLDER
K 53LZ NOZZLE HOLDER NH NH

Information:

1. Remove six bolts (1) and remove the fan.2. Loosen the fan belts and alternator belts. Remove the belts. 3. Remove four bolts (3) and adjusting bolt (2). Remove the fan drive.Install Fan Drive
1. Put the fan drive in position on the engine and install the four bolts.2. Install the adjusting bolt. Install the fan and alternator belts. Make an adjustment to the tension. The correct belt tension is 7/8 in. (22 mm) movement for used belts and 3/4in. (19 mm) movement for new belts when measured with the application of a 25 lb. (11 kg) force half way between the two pulleys.3. Tighten the four fan drive bolts.4. Install the fan with the six bolts.Disassemble Fan Drive
start by: a) remove fan drive 1. Remove two bolts and washers (2). Remove hub (1). 2. Bend down the lock plate and remove bolts (4). Remove the lock plate and washer (3). 3. Use tool (A) to remove the pulley from the bracket assembly. 4. Remove the two bearings and the seal with tool (B).5. Remove the spacer.Assemble Fan Drive
1. Put multipurpose grease on the seal. Install the seal on the pulley with tool (A).2. Install the pulley in the bracket assembly. Fill half the space between the two bearings with multipurpose grease.3. Heat two bearings in oil. The temperature of the oil must be 300° 25°F (149° 14°C).
The bearing heating oil used to heat the bearings must have a flash point above 400°F (204°C).
4. Put multipurpose grease on the bearings. Install the bearing, spacer and bearing with tool (A). 5. Install the washer, lock plate and two bolts. Bend the lock plate up.6. Install the hub with the two bolts and lockwashers.end by: a) install fan drive