Information nozzle-holder
BOSCH
9 430 615 285
9430615285
ZEXEL
105030-3540
1050303540
ISUZU
1153301090
1153301090
Rating:
Scheme ###:
| 6. | [2] | 150508-3300 | BEARING PIN |
| 8. | [1] | 150651-5500 | NOZZLE-RETAINING NUT |
| 10. | [1] | 150550-4800 | STOP PIN |
| 12. | [1] | 150562-4400 | COMPRESSION SPRING |
| 18. | [1] | 150570-0100 | SPACER BUSHING |
| 20. | [1] | 150571-0000 | SET OF NUTS |
| 24. | [1] | 150572-0120 | STOP PIN |
| 26. | [1] | 150562-3100 | COMPRESSION SPRING |
| 28. | [1] | 150565-5500 | THREADED PIN |
| 29. | [1] | 150519-4600 | UNION NUT |
| 31. | [1] | 150567-6500 | CAP NUT |
| 800S/1. | [0] | 150523-5000 | SHIM D11.5&4.5T0.50 |
| 800S/1. | [0] | 150523-5100 | SHIM D11.5&4.5T0.52 |
| 800S/1. | [0] | 150523-5200 | SHIM D11.5&4.5T0.54 |
| 800S/1. | [0] | 150523-5300 | SHIM D11.5&4.5T0.56 |
| 800S/1. | [0] | 150523-5400 | SHIM D11.5&4.5T0.58 |
| 800S/1. | [0] | 150523-5500 | SHIM D11.5&4.5T0.60 |
| 800S/1. | [0] | 150523-6000 | SHIM D11.5&4.5T0.70 |
| 800S/1. | [0] | 150523-6500 | SHIM D11.5&4.5T0.80 |
| 800S/1. | [0] | 150523-7000 | SHIM D11.5&4.5T0.90 |
| 800S/1. | [0] | 150523-7500 | SHIM D11.5&4.5T1.00 |
| 800S/1. | [0] | 150532-6700 | SHIM D11.5&4.5T0.1 |
| 800S/1. | [0] | 150532-6800 | SHIM D11.5&4.5T0.2 |
| 800S/1. | [0] | 150532-6900 | SHIM D11.5&4.5T0.3 |
| 800S/1. | [0] | 150532-7000 | SHIM D11.5&4.5T0.4 |
Include in #1:
106871-1020
as NOZZLE-HOLDER
Cross reference number
Zexel num
Bosch num
Firm num
Name
105030-3540
9 430 615 285
1153301090 ISUZU
NOZZLE-HOLDER
K 53LZ NOZZLE HOLDER NH NH
K 53LZ NOZZLE HOLDER NH NH
Information:
ACTION REQUIRED
New DEF system software is available that reduces the risk of an internal DEF injector leak by improved temperature management. Please update the DEF system software at the next opportunity.
Ensure that all adjustments and repairs that are carried out to the Diesel Emission Fluid (DEF) system are performed by authorized personnel that have the correct training. Before beginning ANY work on the DEF system, refer to Operation and Maintenance Manual, "General Hazard" for safety information.
Before Failure:
Check that the engine software is the latest version before updating the DEF pump software.
If the engine software is not the latest version, update the Engine Software first.
If needed, update the engine software with the latest available in SIS Web.
Flash the DEF Pump ECM with the software listed in the Parts Needed or latest available in SIS Web.
For flash programming of the ECM software, refer to Troubleshooting "ECM Software - Install".
After Failure:
Ensure the appropriate steps have been followed when diagnosing a DEF injector failure. Refer to UENR0662.
If it is determined that replacement of DEF injector is required, refer to Disassembly and Assembly Manual - Diesel Exhaust Fluid Injector - Remove and Install.
After the DEF injector has been replaced, perform the DEF system software update as detailed in the "Before Failure" section above.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-5000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 0.5-hour job for Group 1
An additional 2 hours are allowed for After failure
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-5000 hrs,
0-60 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 0.5-hour job for Group 2
An additional 2 hours are allowed for After failure
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Have questions with 105030-3540?
Group cross 105030-3540 ZEXEL
Hino
Isuzu
105030-3540
9 430 615 285
1153301090
NOZZLE-HOLDER