105030-3462 ZEXEL 9 430 615 357 BOSCH NOZZLE-HOLDER 9430615357 1050303462

Information nozzle-holder

BOSCH 9 430 615 357 9430615357

ZEXEL 105030-3462 1050303462

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy NOZZLE-HOLDER 105030-3462 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

6.	[2]	150508-3300	BEARING PIN
8.	[1]	150651-5800	NOZZLE-RETAINING NUT
10.	[1]	150550-4800	STOP PIN
12.	[1]	150562-4400	COMPRESSION SPRING
18.	[1]	150570-0800	SPACER BUSHING
20.	[1]	150571-0000	SET OF NUTS
24.	[1]	150572-8920	STOP PIN
26.	[1]	150562-3100	COMPRESSION SPRING
28.	[1]	150565-5500	THREADED PIN
29.	[1]	150519-4600	UNION NUT
30.	[1]	029332-2030	GASKET D25.5&22T1
31.	[1]	150567-8300	CAP NUT
34.	[1]	016550-1120	O-RING
800S/1.	[0]	150523-5000	SHIM D11.5&4.5T0.50
800S/1.	[0]	150523-5100	SHIM D11.5&4.5T0.52
800S/1.	[0]	150523-5200	SHIM D11.5&4.5T0.54
800S/1.	[0]	150523-5300	SHIM D11.5&4.5T0.56
800S/1.	[0]	150523-5300	SHIM D11.5&4.5T0.56
800S/1.	[0]	150523-5400	SHIM D11.5&4.5T0.58
800S/1.	[0]	150523-5500	SHIM D11.5&4.5T0.60
800S/1.	[0]	150523-6000	SHIM D11.5&4.5T0.70
800S/1.	[0]	150523-6500	SHIM D11.5&4.5T0.80
800S/1.	[0]	150523-7000	SHIM D11.5&4.5T0.90
800S/1.	[0]	150523-7500	SHIM D11.5&4.5T1.00
800S/1.	[0]	150532-6700	SHIM D11.5&4.5T0.1
800S/1.	[0]	150532-6800	SHIM D11.5&4.5T0.2
800S/1.	[0]	150532-6900	SHIM D11.5&4.5T0.3
800S/1.	[0]	150532-7000	SHIM D11.5&4.5T0.4

Include in #1:

106671-1771 as NOZZLE-HOLDER

Cross reference number

Zexel num

Bosch num

Firm num

Name

105030-3462

9 430 615 357

NOZZLE-HOLDER
K

Information:

941B 80H3884-Up
(1) Remove the engine from the machine; see the Service Manual for the procedure. Put both engines, new and old, in a position that will give good access to their front, rear, top and both sides. For those engines that were equipped with glow plugs, either remove the wire from the heat-start switch to the glow plug lead assembly, or put tape over the end of the wire when it is disconnected. This wire will not be needed because the new engine does not have glow plugs.(2) From the old engine, remove the crankshaft pulley and hub, engine front support, the rear supports (from the sides of the flywheel housing) and the flywheel. Install these