105030-3330 ZEXEL 9 430 615 193 BOSCH NOZZLE-HOLDER 9430615193 1050303330 236201970a

Information nozzle-holder

BOSCH 9 430 615 193 9430615193

ZEXEL 105030-3330 1050303330

HINO 236201970A 236201970a

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy NOZZLE-HOLDER 105030-3330 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

2.	[1]	150550-5700	STOP PIN
3.	[1]	150562-4400	COMPRESSION SPRING
4.	[1]	150565-7000	THREADED PIN
6.	[1]	029331-4130	GASKET
7.	[1]	150567-9601	CAP NUT
11.	[1]	150562-4400	COMPRESSION SPRING
12.	[1]	150560-1601	SLOTTED WASHER
17.	[1]	150651-3200	NOZZLE-RETAINING NUT
30.	[2]	139510-0300	GASKET
31.	[1]	150613-1501	EYE BOLT
800S/1.	[1]	150538-4900	SHIM D9.5&4.5T0.40
800S/1.	[1]	150538-5000	SHIM D9.5&4.5T0.50
800S/1.	[1]	150538-5100	SHIM D9.5&4.5T0.52
800S/1.	[1]	150538-5200	SHIM D9.5&4.5T0.54
800S/1.	[1]	150538-5300	SHIM D9.5&4.5T0.56
800S/1.	[1]	150538-5400	SHIM D9.5&4.5T0.58
800S/1.	[1]	150538-5500	SHIM D9.5&4.5T0.60
800S/1.	[1]	150538-5600	SHIM D9.5&4.5T0.70

Cross reference number

Zexel num

Bosch num

Firm num

Name

105030-3330

9 430 615 193

236201970A HINO

NOZZLE-HOLDER
K 53LZ NOZZLE HOLDER NH NH

Information:

TERMINATION DATE
30Sep2014
PROBLEM
The existing fuel injector has a 150 degree spray pattern. During the combustion stroke (process), the current end of injection timing maps can allow the 150 degree spray pattern to temporarily impinge upon the exposed wall of the cylinder liner as the piston moves downward in the bore.
Depending on engine speed and load factors, the fuel making contact with the liner can dilute the oil film or cause excessive soot. The excessive soot can build up to form carbon deposits at the piston lands and grooves, resulting in uneven top ring and groove wear, which may cause ring breakage. This situation is aggravated by contamination within the air and lubrication systems.
AFFECTED PRODUCT
Model Identification Number
793D FDB01439, 1442-1443, 1450-1451, 1561-1562, 1566-1567, 1576, 1620-1622, 1627, 1629
PARTS NEEDED
Qty
Part Number Description
16 4237547 INJECTOR GP-FUEL
1 4264383 SOFTWARE GP-ELEK
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to the service manual if/as necessary.
Install a full set of sixteen 145 degree fuel injectors along with
the software.
NOTE 1: Do not mix the 145 degree fuel injectors with the former 150 degree fuel injectors in the same engine.
NOTE 2: Do not install the software that is listed in the Parts Needed unless all sixteen fuel injectors have been replaced by the 145 degree spray pattern fuel injectors that is listed in the Parts Needed.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-20000 hrs,
0-72 mo 100.0% 50.0% 0.0% 0.0% 0.0% 50.0%
This is a 8.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.