Information nozzle-holder
BOSCH
9 430 615 355
9430615355
ZEXEL
105030-3231
1050303231
ISUZU
1153300721
1153300721
Rating:
Scheme ###:
| 2. | [1] | 029300-3100 | GASKET |
| 4. | [1] | 150644-8800 | INLET UNION |
| 6. | [2] | 150508-3300 | BEARING PIN |
| 8. | [1] | 150651-5500 | NOZZLE-RETAINING NUT |
| 10. | [1] | 150550-4800 | STOP PIN |
| 12. | [1] | 150562-4400 | COMPRESSION SPRING |
| 18. | [1] | 150570-0400 | SPACER BUSHING |
| 20. | [1] | 150571-0000 | SET OF NUTS |
| 24. | [1] | 150572-0420 | STOP PIN |
| 26. | [1] | 150562-3100 | COMPRESSION SPRING |
| 28. | [1] | 150565-5500 | THREADED PIN |
| 29. | [1] | 150519-4600 | UNION NUT |
| 30. | [1] | 029332-2030 | GASKET D25.5&22T1 |
| 31. | [1] | 150567-8300 | CAP NUT |
| 40. | [2] | 139508-0000 | GASKET D13.2&8.2T1 |
| 42. | [1] | 139808-0000 | EYE BOLT |
| 800S/1. | [0] | 150523-5000 | SHIM D11.5&4.5T0.50 |
| 800S/1. | [0] | 150523-5100 | SHIM D11.5&4.5T0.52 |
| 800S/1. | [0] | 150523-5200 | SHIM D11.5&4.5T0.54 |
| 800S/1. | [0] | 150523-5300 | SHIM D11.5&4.5T0.56 |
| 800S/1. | [0] | 150523-5300 | SHIM D11.5&4.5T0.56 |
| 800S/1. | [0] | 150523-5400 | SHIM D11.5&4.5T0.58 |
| 800S/1. | [0] | 150523-5500 | SHIM D11.5&4.5T0.60 |
| 800S/1. | [0] | 150523-6000 | SHIM D11.5&4.5T0.70 |
| 800S/1. | [0] | 150523-6500 | SHIM D11.5&4.5T0.80 |
| 800S/1. | [0] | 150523-7000 | SHIM D11.5&4.5T0.90 |
| 800S/1. | [0] | 150523-7500 | SHIM D11.5&4.5T1.00 |
| 800S/1. | [0] | 150532-6700 | SHIM D11.5&4.5T0.1 |
| 800S/1. | [0] | 150532-6800 | SHIM D11.5&4.5T0.2 |
| 800S/1. | [0] | 150532-6900 | SHIM D11.5&4.5T0.3 |
| 800S/1. | [0] | 150532-7000 | SHIM D11.5&4.5T0.4 |
Include in #1:
101602-4641
as NOZZLE-HOLDER
Cross reference number
Zexel num
Bosch num
Firm num
Name
105030-3231
9 430 615 355
1153300721 ISUZU
NOZZLE-HOLDER
K 53LZ NOZZLE HOLDER NH NH
K 53LZ NOZZLE HOLDER NH NH
Information:
Introduction
The design of the groove for the O-ring has changed. The proper O-ring should be used in order to match the design of the groove.
Illustration 1 g00715900
(1) O-Ring seal
Illustration 2 g00716166
Old O-Ring grooveUse with 9X-7680 O-Ring Seal
Illustration 3 g00716168
New O-Ring grooveUse with 033-6039 O-Ring Seal
Table 1
O-Ring Part Numbers
New Part Number Old Part Number
033-6039 9X-7680 Improved Kits
One extra O-ring of the new size will be included within each kit. The affected kits are listed in table 2.
Table 2
Part Number Description
138-6256 Seal Kit
154-6732 Fuel Injection Pump Kit
166-5985 Unit Injector Hydraulic Pump Compensator
The design of the groove for the O-ring has changed. The proper O-ring should be used in order to match the design of the groove.
Illustration 1 g00715900
(1) O-Ring seal
Illustration 2 g00716166
Old O-Ring grooveUse with 9X-7680 O-Ring Seal
Illustration 3 g00716168
New O-Ring grooveUse with 033-6039 O-Ring Seal
Table 1
O-Ring Part Numbers
New Part Number Old Part Number
033-6039 9X-7680 Improved Kits
One extra O-ring of the new size will be included within each kit. The affected kits are listed in table 2.
Table 2
Part Number Description
138-6256 Seal Kit
154-6732 Fuel Injection Pump Kit
166-5985 Unit Injector Hydraulic Pump Compensator
Have questions with 105030-3231?
Group cross 105030-3231 ZEXEL
Isuzu
Mitsubishi
Isuzu
105030-3231
9 430 615 355
1153300721
NOZZLE-HOLDER