Buy 105025-0980 ZEXEL 9 432 610 652 BOSCH NOZZLE 9432610652 1050250980 1153112730


 

Information nozzle

BOSCH 9 432 610 652 9432610652
ZEXEL 105025-0980 1050250980
ISUZU 1153112730 1153112730
105025-0980 NOZZLE
Rating:
50
Buy NOZZLE 105025-0980 zexel genuine, new aftermarket engine parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
£71.33
 

29 Mar 2018
4.85[1.80] pounds
Bosch: Bosch
Bosch 9432610652 Hole-Type Nozzle

Include in #1:

106671-6590 as NOZZLE

Cross reference number

Zexel num
Bosch num
Firm num
Name
105025-0980 
9 432 610 652 
NP-DLLA148SM098 
1153112730  ISUZU
NOZZLE
C 50LC NOZZLE N (DLL-S) N




Information:

Start By:a. remove radiator 1. Remove the four bolts and remove fan blade (1) and extension. 2. Loosen bolts (2) and remove fan belt (4). Loosen clamps (3) and disconnect the two hoses. Remove nut (5) from water pump fan pulley (6). 3. Install tooling (A) and remove fan pulley (6). 4. Remove four bolts (7) and remove the water pump and gasket. At the time of assembly, tighten nut (5) to the torque of 80 N m (60 lb.ft.) Install in the reverse order.Disassemble Water Pump
Start By:a. remove water pump 1. Remove key (1) from the shaft. 2. Remove pump housing (2) from the rear housing. 3. Remove snap ring (3) with tool (A). 4. Put the water pump housing in position on a press. Install tool (B) and remove the shaft assembly from the impeller and water pump housing. 5. Remove seals (4) from the water pump housing if they are damaged. 6. Put shaft assembly (5) in position in a press. Install tool (B) and remove bearings (6) and spacer (7) from the shaft.Assemble Water Pump
1. Put one of the shaft's bearings in position in a press. Make sure there is support for the inner race of the bearing. Push shaft (1) on to bearing (2). 2. Install spacer (4) on the shaft. Put second bearing (3) in position and push the shaft on to it. 3. Install seal (6) and flange (5) in the water pump housing. 4. Put 2S3230 Bearing Lubricant on the bearings. Put the water pump housing in position on a press and install shaft assembly (7) in the housing. 5. Install snap ring (8) over the bearings with tool (A). 6. Install the water seal in the housing with tooling (B). 7. Install seal (9) on the shaft assembly. 8. Install impeller (10) on the shaft with tooling (C) and a press. The clearance between the impeller blade and pump body must be 0.30 to 0.81 mm (.012 to .032 in). 9. Install a new gasket on water pump housing (12). Install housing (12) on the rear housing with nuts (11) that hold it. 10. Install key (13) in the shaft.End By:a. install water pump

Have questions with 105025-0980?





Group cross 105025-0980 ZEXEL

Komatsu 

9 432 611 444 
NP-DLL160SM090 
6162136320 
NOZZLE
9 432 611 445 
NP-DLLA160SM091 
6162143320 
NOZZLE

Mitsubishi 

9 432 610 651 
NP-DLLA160SM092 
ME740438 
NOZZLE

Komatsu 

9 432 611 446 
NP-DLL140SM093 
6212123120 
NOZZLE
9 432 611 447 
NP-DLL143SM094 
6212123220 
NOZZLE
9 432 610 827 
NP-DLLA142SM095 
6211123120 
NOZZLE
9 432 610 457 
NP-DLLA155SM096 
6162153320 
NOZZLE
9 432 612 627 
NP-DLLA152SM097 
 
NOZZLE

Isuzu 

105025-0980  
9 432 610 652 
NP-DLLA148SM098 
1153112730 
NOZZLE

Komatsu 

9 432 611 448 
NP-DLL160SM099 
6162147320 
NOZZLE
Back to top