105019-0180 ZEXEL 9 432 611 169 BOSCH NOZZLE SET 9432611169 1050190180 236601170a


 

Information nozzle set

BOSCH 9 432 611 169 9432611169
ZEXEL 105019-0180 1050190180
HINO 236601170A 236601170a
105019-0180 NOZZLE SET
Rating:
33
Buy NOZZLE SET 105019-0180 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105019-0180 
9 432 611 169 
236601170A  HINO
NOZZLE SET
C 53KY NOZZLE KIT NZ-KIT N&NH




Information:

Cautions Regarding Battery* Handle Battery Carefully * Never use flames or allow sparks near the battery. The battery releases flammable hydrogen gas and oxygen gas. These gases can be ignited by flames and cause an explosion.* Do not use the battery when the fluid surface is lower than the minimum level. Using a battery with a low electrolyte level can result in an explosion.* Do not short the battery terminals with a tool or other metal object.* When disconnecting battery cables, always remove the cable from the negative (-) terminal first. When reconnecting cables, attach the cable to the positive (+) terminal first.* Charge the battery in a well-ventilated area, with all filling hole plugs removed.* Make sure the cable clamps are securely installed on the battery terminals. A loose cable clamp can cause sparks that may result in an explosion.* Before servicing electrical components or conducting electrical welding, set the battery switch to the [Open/OFF] position or disconnect the cable from the negative (-) battery terminal to cut off the electrical current.* Electrolyte (battery fluid) contains dilute sulfuric acid. Careless handling of the battery can lead to the loss of sight and/or burns. Also, do not swallow electrolyte.* Wear protective goggles and rubber gloves when maintaining and inspecting the battery (when adding water, charging, etc.).* If electrolyte is spilled onto the skin or clothes, immediately wash with lots of clean fresh water and thoroughly clean with soap.* If electrolyte gets into eyes, immediately flush with lots of clean fresh water and seek immediate medical attention.* Should you accidentally swallow electrolyte, gargle with plenty of water, then drink lots of water, and seek immediate medical attention.
Response To Abnormalities* If Engine Overheats, Conduct Heating Operation Before Stopping The Engine If the engine overheats, do not stop the engine immediately. Abruptly stopping an overheated engine may cause the coolant temperature to rise, resulting in seizing of the engine. If the engine overheats, operate the engine at low idling speed (cooling operation), and stop the engine after the coolant temperature lowers sufficiently.Do not add coolant immediately after stopping the engine. Adding coolant to a hot engine may cause damage to the cylinder heads due to sudden change in temperature. Add coolant after the engine cools to room temperature.* If Engine Stops Due To Abnormality, Exercise Caution When Restarting If the engine stops due to an abnormality, do not restart the engine immediately. If the engine stops with an alarm, check and correct the cause of the problem before restarting. Operating the engine without correcting the problem may result in serious engine problems.* If Oil Pressure Drops, Stop Engine Immediately If the engine oil pressure decreases, stop the engine immediately, and inspect the lubrication system. Operating the engine with low oil pressure may cause seizing of the bearings and other parts.* If Fan Belt Breaks, Stop Engine Immediately If the fan belt breaks, stop the engine immediately. Continued operation of the engine without the fan belt causes coolant to change into steam

Have questions with 105019-0180?





Group cross 105019-0180 ZEXEL

Hino 

9 432 611 110 
NP-DLLA150SN902 
236601110A 
NOZZLE SET
9 432 611 110 
NP-DLLA150SN902 
S236601110 
NOZZLE SET
9 432 611 111 
236601100A 
NOZZLE SET
9 432 611 112 
NP-DLLA150SN904 
236601090A 
NOZZLE SET
9 432 611 113 
NP-DLLA150SN906 
236601130A 
NOZZLE SET
9 432 610 775 
NP-DLLA150SN912 
236601150A 
NOZZLE SET
9 432 611 114 
NP-DLLA155SN913 
236601140A 
NOZZLE SET
9 432 611 114 
NP-DLLA155SN913 
236601140B 
NOZZLE SET
9 432 611 115 
NP-DLLA155SM913 
236601140C 
NOZZLE SET
9 432 611 116 
NP-DLLA156SN921 
236601160A 
NOZZLE SET
9 432 611 148 
NP-DLLA156SN921 
236601160B 
NOZZLE SET
105019-0180  
9 432 611 169 
236601170A 
NOZZLE SET
9 432 612 547 
NP-DLLA150SN929 
 
NOZZLE SET
Back to top