Information nozzle
BOSCH
9 432 610 939
9432610939
ZEXEL
105017-2830
1050172830
MITSUBISHI
ME748715
me748715
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
DLLA154PN270 DLLA148PN283 DLLA152PN264 DLLA143PN265 Fuel Injector Nozzle Engine Fuel Car Accessories(DLLA152PN264)
YJLUXMU Optimize engine operating conditions: Ensure that the engine is in optimal working condition under any operating conditions, improving the overall performance of the vehicle. || Uniform distribution of combustible mixture: Ensure more even distribution of combustible mixture between cylinders and improve combustion efficiency. || Save fuel and reduce emissions: Helps to save fuel and reduce harmful components in exhaust gas, meeting environmental requirements. || Precise control of fuel supply: Control the injection of fuel to maintain smooth engine operation. || DLLA154PN270 DLLA148PN283 DLLA152PN264 DLLA143PN265 Fuel Injector Nozzle Engine Fuel Car Accessories
YJLUXMU Optimize engine operating conditions: Ensure that the engine is in optimal working condition under any operating conditions, improving the overall performance of the vehicle. || Uniform distribution of combustible mixture: Ensure more even distribution of combustible mixture between cylinders and improve combustion efficiency. || Save fuel and reduce emissions: Helps to save fuel and reduce harmful components in exhaust gas, meeting environmental requirements. || Precise control of fuel supply: Control the injection of fuel to maintain smooth engine operation. || DLLA154PN270 DLLA148PN283 DLLA152PN264 DLLA143PN265 Fuel Injector Nozzle Engine Fuel Car Accessories
MWENJIAN Compatible for Mitsubishi Pajero L200 Triton 3.2 4M41 Fuel Injector Nozzle DLLA148PN283
MWENJIAN Replaces Part Number: DLLA148PN283 || Syringes made of metal and plastic || Features excellent fuel atomization and a tightly controlled injection pattern, allowing for better fuel evaporation, which ultimately leads to improved engine efficiency and reduced emissions. || An internal seal ring is included to prevent fuel exposure and minimize stickiness during operation, ensuring a longer lifespan and reliable performance of your injector nozzle. || Compatible with a wide range of models and easy to install as a direct replacement part.
MWENJIAN Replaces Part Number: DLLA148PN283 || Syringes made of metal and plastic || Features excellent fuel atomization and a tightly controlled injection pattern, allowing for better fuel evaporation, which ultimately leads to improved engine efficiency and reduced emissions. || An internal seal ring is included to prevent fuel exposure and minimize stickiness during operation, ensuring a longer lifespan and reliable performance of your injector nozzle. || Compatible with a wide range of models and easy to install as a direct replacement part.
You can express buy:
USD 28
10-11-2022
10-11-2022
USD 60
10-11-2022
10-11-2022
USD 20
11-03-2019
11-03-2019
4pcslot free shipping DLLA148PN283 105017-2830 Fuel Injector Nozzle Flat type nozzle
Images:
USD 6
[24-Jan-2019]
USD 5
[23-Aug-2022]
USD 5
[06-Nov-2018]
USD 26.13
[24-May-2019]
Include in #2:
109144-3041
as NOZZLE
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
DEF heated lines can get damaged during handling or other failure modes and leak diesel exhaust fluid on Clean Emission Module (CEM) and other components.Solution
Caterpillar is aware of this problem and is recommending the following interim corrective action.
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Rework Procedure
Note: This procedure is meant for temporary repair of a DEF line to allow the machine to be safely transported to the repair shop.
Table 1
Required Parts
Part Number Part Name
473-2053 Diesel Exhaust Fluid Lines Gp (5/16th 90 degree adapter)
473-2055 Diesel Exhaust Fluid Lines Gp (5/16th straight adapter)
473-2056 Diesel Exhaust Fluid Lines Gp (3/8th 90 degree adapter)
473-2057 Diesel Exhaust Fluid Lines Gp (38th 90 Straight adapter)
Table 2
Required Tools
Part Number Part Name
1U-7648 Tube Cutter
Illustration 1 g06433660
Cut the connector end on the corrugated section with the cutter.
Illustration 2 g06433665
Cut the two wires with a tie cutter.
Illustration 3 g06433668
Use a knife or sharp blade to cut the outer sheathing off. Ensure not to cut or damage the inner fluid hose.
Illustration 4 g06433669
Install the hose clamp provided first before installing the connector. Use appropriate size (3/8th or 5/16th) and type (90 degree or straight) fitting.
Illustration 5 g06433672
Fasten the clamp until the two jaws are either in contact or about 2 to 3 mm (0.08 to 0.1 inch) apart.
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
DEF heated lines can get damaged during handling or other failure modes and leak diesel exhaust fluid on Clean Emission Module (CEM) and other components.Solution
Caterpillar is aware of this problem and is recommending the following interim corrective action.
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Rework Procedure
Note: This procedure is meant for temporary repair of a DEF line to allow the machine to be safely transported to the repair shop.
Table 1
Required Parts
Part Number Part Name
473-2053 Diesel Exhaust Fluid Lines Gp (5/16th 90 degree adapter)
473-2055 Diesel Exhaust Fluid Lines Gp (5/16th straight adapter)
473-2056 Diesel Exhaust Fluid Lines Gp (3/8th 90 degree adapter)
473-2057 Diesel Exhaust Fluid Lines Gp (38th 90 Straight adapter)
Table 2
Required Tools
Part Number Part Name
1U-7648 Tube Cutter
Illustration 1 g06433660
Cut the connector end on the corrugated section with the cutter.
Illustration 2 g06433665
Cut the two wires with a tie cutter.
Illustration 3 g06433668
Use a knife or sharp blade to cut the outer sheathing off. Ensure not to cut or damage the inner fluid hose.
Illustration 4 g06433669
Install the hose clamp provided first before installing the connector. Use appropriate size (3/8th or 5/16th) and type (90 degree or straight) fitting.
Illustration 5 g06433672
Fasten the clamp until the two jaws are either in contact or about 2 to 3 mm (0.08 to 0.1 inch) apart.