Information nozzle
BOSCH
9 432 611 277
9432611277
ZEXEL
105015-7730
1050157730
NIIGATA-URAWA
F6900816A
f6900816a
Rating:
Include in #1:
106671-4346
as NOZZLE
Cross reference number
Zexel num
Bosch num
Firm num
Name
105015-7730
VIN32300A NIIGATA-URAWA
NOZZLE
A C 50LC NOZZLE N (DLL-S) N
A C 50LC NOZZLE N (DLL-S) N
105015-7730
UIN32300A NIIGATA-URAWA
NOZZLE
B C 50LC NOZZLE N (DLL-S) N
B C 50LC NOZZLE N (DLL-S) N
Information:
Start By:a. remove oil pump1. Check the main bearing caps for identification for their location and direction in the block. The caps must be installed in the same location and direction from which they were removed. 2. Remove No. 2 through No. 6 bearing caps (1). Remove thrust plates from the No. 4 main bearing.
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either the crankshaft or cylinder block or both.
3. Remove the upper halves of the main bearings by putting tool (A) in oil hole (2) in the crankshaft. Turn the crankshaft in the direction which will push the
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either the crankshaft or cylinder block or both.
3. Remove the upper halves of the main bearings by putting tool (A) in oil hole (2) in the crankshaft. Turn the crankshaft in the direction which will push the