105015-5170 ZEXEL 9 432 610 187 BOSCH NOZZLE 9432610187 1050155170 16620z5508


 

Information nozzle

BOSCH 9 432 610 187 9432610187
ZEXEL 105015-5170 1050155170
NISSAN-DIESEL 16620Z5508 16620z5508
105015-5170 NOZZLE
Rating:
85
Buy NOZZLE 105015-5170 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105015-5170 
9 432 610 187 
NP-DLLA151SN517 
16620Z5508  NISSAN-DIESEL
NOZZLE
C 50LC NOZZLE N (DLL-S) N




Information:

Your truck/engine may not have the same or all of the gauges as shown in the illustrations. The illustrations shown are of typical gauges.Gauges provide a "look" inside the engine. Be sure they are in good working order. You can determine what is the "normal" operating range by observing your gauges over a period of time.Noticeable changes in gauge readings are an indication of potential gauge or engine problems. This also applies to gauge readings that have changed significantly but are still within specifications. The cause of any sudden or significant change in the readings should be determined and corrected. Contact your Caterpillar dealer for assistance as needed.
If no oil pressure is indicated, stop the engine. Engine damage can result.
Oil Pressure - Typical oil pressure range is 30 and 45 psi (207 and 310 kPa) (running at rated engine speed, with SAE 15W-40 oil, at operating temperature). A lower pressure is normal at low idle. Water Temperature - Typical water temperature range is 189° to 208°F (87° to 98°C). Maximum allowable temperature is 216°F (102°C) with the cooling system pressurized. Somewhat higher temperatures may occur under certain conditions. Ammeter - Indicates the amount of charge or discharge in the battery charging circuit. Typical operation of the indicator should be slightly to the positive (right) side of "0" (zero).With the engine running, during normal operation, if the indicator is constantly to the negative (left) side of "0" (zero) or shows excessive charge, have the charging system checked for malfunction.
Do not exceed 2300 rpm in any situation.
Tachometer - Indicates engine rpm (speed). The engine can be operated at high idle without damage, but should not be allowed to overspeed. Overspeeding when downshifting, going downhill, etc., can result in serious damage to your engine. Fuel Level - Indicates fuel level in the fuel tank. Electrically operated, it registers only when the key switch is ON.
A drop in fuel pressure usually indicates a dirty or plugged fuel filter.
Fuel Pressure - Indicates fuel pressure to the unit injectors. The indicator (if equipped) should register in the NORMAL (green) range. Typical fuel pressure at low idle is 60 psi (410 kPa) and at TEL (Top Engine Limit), 80 psi (550 kPa).

Have questions with 105015-5170?





Group cross 105015-5170 ZEXEL

Nissan-Diesel 

9 432 610 693 
NP-DLLA140SN510 
1662096507 
NOZZLE
9 432 612 318 
NP-DLLA145SN511 
 
NOZZLE

Kubota 

9 432 611 734 
NP-DLL155SN512 
1452721300 
NOZZLE
9 432 611 732 
NP-DLL155SN513 
1452720300 
NOZZLE

Komatsu 

9 432 611 733 
NP-DLL155SN514 
6162133120 
NOZZLE
9 432 610 509 
NP-DLLA155SN515 
 
HOLE-TYPE NOZZLE

Hino 

9 432 611 727 
NP-DLLA160SN516 
236401380A 
NOZZLE

Nissan-Diesel 

105015-5170  
9 432 610 187 
NP-DLLA151SN517 
16620Z5508 
NOZZLE

Isuzu 

9 432 611 744 
NP-DLLA160SN518 
1153111230 
NOZZLE
9 432 611 731 
NP-DLLA160SN519 
1153111220 
NOZZLE
Back to top