Information nozzle
BOSCH
9 432 610 310
9432610310
ZEXEL
105007-1310
1050071310
ISUZU
8971074440
8971074440
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
DN0PDN113 DN0PD58 DN0PDN122 DN0PDN159 DN0PDN131 DN0PD80 DN4PD62 DN0PD55 Fuel Injector Spray Nozzle THYGA11S38(DN4PD62)
JJNLDYO DN0PDN113 DN0PD58 DN0PDN122 DN0PDN159 DN0PDN131 DN0PD80 DN4PD62 DN0PD55 Fuel Injector Spray Nozzle THYGA11S38 || Reduced the complexity and cost of matching fuel injectors for different engines. || It will not deform, melt or damage due to prolonged high temperature, ensuring the long-term stable use of the fuel injector. || Helps to extend the service life of fuel injectors, reduce performance degradation and malfunctions. || When power is needed, quickly increase the fuel injection amount to meet the engine's energy requirements, thereby improving the vehicle's acceleration and climbing performance.
JJNLDYO DN0PDN113 DN0PD58 DN0PDN122 DN0PDN159 DN0PDN131 DN0PD80 DN4PD62 DN0PD55 Fuel Injector Spray Nozzle THYGA11S38 || Reduced the complexity and cost of matching fuel injectors for different engines. || It will not deform, melt or damage due to prolonged high temperature, ensuring the long-term stable use of the fuel injector. || Helps to extend the service life of fuel injectors, reduce performance degradation and malfunctions. || When power is needed, quickly increase the fuel injection amount to meet the engine's energy requirements, thereby improving the vehicle's acceleration and climbing performance.
Diesel Fuel Injector Nozzle Set 105007-1130 105007-1310, Compatible For Nissan Terrano Navara 2.7 TD TD27 TD42 TD25 DNOPDN113 DNOPDN131
CHAOZHSX The fuel injector can spray fuel with high precision and the fuel atomization state is good || When the engine operating conditions change, the fuel injector responds quickly, which can improve the acceleration performance of the vehicle || The fuel injector has strong durability and long service life || Universal accessory number: 105007-1130, DN0PDN113, 16620-43G02, 1050071130, 1662043G02 || Kind reminder: Please confirm your shipping address before purchasing and ensure that the product model and size are correct and compatible. If you have any questions, please send an email and a professional will assist you
CHAOZHSX The fuel injector can spray fuel with high precision and the fuel atomization state is good || When the engine operating conditions change, the fuel injector responds quickly, which can improve the acceleration performance of the vehicle || The fuel injector has strong durability and long service life || Universal accessory number: 105007-1130, DN0PDN113, 16620-43G02, 1050071130, 1662043G02 || Kind reminder: Please confirm your shipping address before purchasing and ensure that the product model and size are correct and compatible. If you have any questions, please send an email and a professional will assist you
Diesel Fuel Injector Nozzle Set 105007-1130 105007-1310 Compatible For Nissan Terrano Navara 2.7 TD TD27 TD42 TD25 DNOPDN113 DNOPDN131
RHEOFCHS OEM NO : 105007-1130, DN0PDN113, 16620-43G02, 1050071130, 1662043G02 Diesel Fuel Injector Nozzle || Compatible For Nissan Terrano Navara 2.7
RHEOFCHS OEM NO : 105007-1130, DN0PDN113, 16620-43G02, 1050071130, 1662043G02 Diesel Fuel Injector Nozzle || Compatible For Nissan Terrano Navara 2.7
You can express buy:
USD 41.68
14-06-2025
14-06-2025
For ISUZU 4JG2 Engine 8971406240 8970796530 6Pcs Fuel Injector Nozzle DN0PDN131 105007-1310
USD 81
13-05-2025
13-05-2025
fuel injector Injection Nozzle for Isuzu engine 4JG2 105007-1310 9432610310 8971074440 DN0PDN131 H105007131
Images:
USD 81
[13-May-2025]
USD 4.96
[13-May-2025]
USD 4.96
[13-May-2025]
USD 10.5
[18-Jun-2025]
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
2. Disconnect the fuel injection lines (2) from pump housing. Put plugs or caps in all lines and openings.3. Remove the three bolts that hold the fuel filter (3) to the aftercooler housing.4. Disconnect the sensing line (1) for the fuel ratio control from the aftercooler housing. 5. Disconnect the oil supply line (4) from the turbocharger.6. Remove the two water lines (5). 7. Disconnect the water outlet line (6) for the air compressor from the cylinder head.8. Remove the bolts (7) that fasten the cylinder head to the cylinder block. 9. Install 3/8"-16NC forged eyebolts in the cylinder head. Fasten a hoist and remove the cylinder head assembly. Weight of cylinder head assembly is 575 lb. (260 kg). Be sure to install a new gasket between the spacer plate and the cylinder block before installing the cylinder head assembly. See REMOVE and INSTALL SPACER PLATE in DISASSEMBLY AND ASSEMBLY.Install Cylinder Head Assembly
1. Clean the top surface of spacer plate and the surface it is in contact with on the cylinder head.2. Install the cylinder head gasket, water seals, and gasket on timing gear cover. 3. Install the 3/8"-16NC forged eyebolts in the cylinder head. Fasten a hoist and put the cylinder head assembly into position on the engine. Make sure the gear (1) in cylinder head is engaged with drive gear (2). 4. Put 9M3710 Anti-Seize Compound on the threads of the bolts for cylinder head. Install the bolts and washers. Tighten the bolts as follows: 1 -Tighten all bolts in number order to 135 lb.ft. (18.7 mkg).2 -Tighten all bolts in number order to 185 5 lb.ft. (25.6 0.7 mkg).3 -Tighten all bolts using hand torque only to 185 5 lb.ft. (25.6 0.7 mkg). 5. Install the two water lines (4).6. Connect the oil supply line (3) to the turbocharger.7. Connect the water outlet line (5) for the air compressor to the cylinder head. 8. Connect the sensing line (6) for the fuel ratio control to the aftercooler housing.9. Put the fuel filter in position, and install the three bolts.10. Remove the plugs and fuel injection lines and pumps. Connect the fuel injection lines (7) to the pumps. Tighten the nuts on fuel lines to 30 5 lb.ft. (4.1 0.7 mkg).11. Fill the cooling system with coolant.end by: a) install camshaft housingb) install fan drive
1. Clean the top surface of spacer plate and the surface it is in contact with on the cylinder head.2. Install the cylinder head gasket, water seals, and gasket on timing gear cover. 3. Install the 3/8"-16NC forged eyebolts in the cylinder head. Fasten a hoist and put the cylinder head assembly into position on the engine. Make sure the gear (1) in cylinder head is engaged with drive gear (2). 4. Put 9M3710 Anti-Seize Compound on the threads of the bolts for cylinder head. Install the bolts and washers. Tighten the bolts as follows: 1 -Tighten all bolts in number order to 135 lb.ft. (18.7 mkg).2 -Tighten all bolts in number order to 185 5 lb.ft. (25.6 0.7 mkg).3 -Tighten all bolts using hand torque only to 185 5 lb.ft. (25.6 0.7 mkg). 5. Install the two water lines (4).6. Connect the oil supply line (3) to the turbocharger.7. Connect the water outlet line (5) for the air compressor to the cylinder head. 8. Connect the sensing line (6) for the fuel ratio control to the aftercooler housing.9. Put the fuel filter in position, and install the three bolts.10. Remove the plugs and fuel injection lines and pumps. Connect the fuel injection lines (7) to the pumps. Tighten the nuts on fuel lines to 30 5 lb.ft. (4.1 0.7 mkg).11. Fill the cooling system with coolant.end by: a) install camshaft housingb) install fan drive