Information nozzle
BOSCH
9 432 610 271
9432610271
ZEXEL
105007-1240
1050071240
ISUZU
8943682480
8943682480
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
FYFMG 1Pcs DN0PDN112 DN0PDN121 DN0PDN124 DN20PD32 DN0PD95 Diesel Engine Fuel Injection Nozzle NP-DNOPDN121 105007-1210(DN0PDN121)
FYFMG Precise matching: designed Compatible for FUEL INJECTION NOZZLE and other diesel engines to ensure good compatibility with the vehicle system and improve operational efficiency || Compliance for OEM standards: Developed based on OEM No. DN0PDN112, it meets the requirements of the original specifications with stable and reliable performance || Optimize fuel efficiency: Improve the fuel atomization effect, help the engine burn more fully, reduce fuel consumption || Enhance driving experience: Ensure accurate fuel injection, making the engine run more smoothly and the power response more quickly || Economical and practical: outstanding cost performance, suitable for replacing old or damaged injectors, helping to save maintenance costs
FYFMG Precise matching: designed Compatible for FUEL INJECTION NOZZLE and other diesel engines to ensure good compatibility with the vehicle system and improve operational efficiency || Compliance for OEM standards: Developed based on OEM No. DN0PDN112, it meets the requirements of the original specifications with stable and reliable performance || Optimize fuel efficiency: Improve the fuel atomization effect, help the engine burn more fully, reduce fuel consumption || Enhance driving experience: Ensure accurate fuel injection, making the engine run more smoothly and the power response more quickly || Economical and practical: outstanding cost performance, suitable for replacing old or damaged injectors, helping to save maintenance costs
4PCS Fuel Injector Nozzle 105007-1240 8-97140624-0, Compatible For ISUZU 4JG2 Diesel Engine, 1050071240
JHGTDE 【Compatible Engine】: Compatible For ISUZU 4JG2 Turbo Diesel Engine Systems || 【Pressure Specification】: 2000Bar common rail injection standard, precision-matched OEM flow rate || 【Sealing Upgrade】: Nano-coated needle valve with reinforced polymer seals prevents leakage || 【Durability】: Tungsten carbide nozzle tip resists diesel corrosion, extends service life || 【Installation】: Direct replacement design, no ECM recalibration required
JHGTDE 【Compatible Engine】: Compatible For ISUZU 4JG2 Turbo Diesel Engine Systems || 【Pressure Specification】: 2000Bar common rail injection standard, precision-matched OEM flow rate || 【Sealing Upgrade】: Nano-coated needle valve with reinforced polymer seals prevents leakage || 【Durability】: Tungsten carbide nozzle tip resists diesel corrosion, extends service life || 【Installation】: Direct replacement design, no ECM recalibration required
You can express buy:
USD 128.69
29-06-2025
29-06-2025
4PCS 4JG2 4JG2T Engine Fuel Injector set 105007-1240 8-97140624-0 For Isuzu Engine TCM KOMATSU HYSTER Forklift Truck Parts New
USD 39.33
14-06-2025
14-06-2025
4pcs 4JG2 4JG2-TC Engine Injector Nozzles 105007-1240 DN0PDN124 8943682480 for Opel For Isuzu N-Serie NKR NPR 3.1TD
Images:
USD 121.9
[14-Jun-2025]
USD 115
[14-Jun-2025]
USD 124.81
[14-Jun-2025]
Include in #2:
104701-1000
as NOZZLE
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
1. Disconnect the fuel outlet line (1) and fuel inlet line (3) from the priming pump.2. Disconnect the fuel line (2) from pump.3. Remove the bolts (4) from pump.4. Remove the fuel transfer pump.5. Remove the fuel lines (1) and (3) from pump.Install Fuel Transfer Pump
1. Install the two fuel lines in transfer pump.2. Put the fuel transfer pump in position in the accessory drive housing, and install the two bolts.3. Connect the two fuel lines to priming pump.4. Connect the fuel line to transfer pump.Disassemble Fuel Transfer Pump
start by: a) remove fuel transfer pump 1. Remove the nut (2), gear (3), and key.2. Remove the cage (1). Remove the O-ring seals from the cage.3. Use tool setup (A) to remove the bearing and seals from cage (1).4. Remove the cover (4).
Be careful during disassembly and assembly of pump to prevent damage to the contacting surfaces of the cover (4) and the pump body.
5. Remove the bolt (5), spring, and ball for the check valve for the priming pump. 6. Remove the gear (7), and gear and shaft assembly (6) from pump body. 7. Use tool setup (A) to remove the bearing from the pump body.Assemble Fuel Transfer Pump
1. Clean all parts thoroughly before assembling the pump. 2. Use tool setup (A) to install the bearing in the pump body.3. Put the gear, and gear and shaft assembly in position in pump body.4. Put a thin amount of 8S6747 Liquid Gasket Material on the face of body assembly that is against the cover.
Do not let the liquid gasket material get into the pump.
5. Put the cover into position on pump body and install the bolts. The gear and shaft assembly must turn freely after the bolts in cover have been tightened.6. Install the check valve ball, spring, and bolt for the priming pump in the cover. 7. Use tool setup (B) to install the seals in cage. Install the two seals with the lips of seals toward each other.8. Use tool setup (A) to install the bearing in cage assembly. Install the O-ring seals on cage. 9. Put clean oil on O-ring seals and lips of seals. 10. Put the cage assembly in position, and install the woodruff key, gear, and nut. Tighten nut to 22 5 lb.ft. (3.0 0.7 mkg).end by: a) install fuel transfer pump
1. Install the two fuel lines in transfer pump.2. Put the fuel transfer pump in position in the accessory drive housing, and install the two bolts.3. Connect the two fuel lines to priming pump.4. Connect the fuel line to transfer pump.Disassemble Fuel Transfer Pump
start by: a) remove fuel transfer pump 1. Remove the nut (2), gear (3), and key.2. Remove the cage (1). Remove the O-ring seals from the cage.3. Use tool setup (A) to remove the bearing and seals from cage (1).4. Remove the cover (4).
Be careful during disassembly and assembly of pump to prevent damage to the contacting surfaces of the cover (4) and the pump body.
5. Remove the bolt (5), spring, and ball for the check valve for the priming pump. 6. Remove the gear (7), and gear and shaft assembly (6) from pump body. 7. Use tool setup (A) to remove the bearing from the pump body.Assemble Fuel Transfer Pump
1. Clean all parts thoroughly before assembling the pump. 2. Use tool setup (A) to install the bearing in the pump body.3. Put the gear, and gear and shaft assembly in position in pump body.4. Put a thin amount of 8S6747 Liquid Gasket Material on the face of body assembly that is against the cover.
Do not let the liquid gasket material get into the pump.
5. Put the cover into position on pump body and install the bolts. The gear and shaft assembly must turn freely after the bolts in cover have been tightened.6. Install the check valve ball, spring, and bolt for the priming pump in the cover. 7. Use tool setup (B) to install the seals in cage. Install the two seals with the lips of seals toward each other.8. Use tool setup (A) to install the bearing in cage assembly. Install the O-ring seals on cage. 9. Put clean oil on O-ring seals and lips of seals. 10. Put the cage assembly in position, and install the woodruff key, gear, and nut. Tighten nut to 22 5 lb.ft. (3.0 0.7 mkg).end by: a) install fuel transfer pump