146760-1920 ZEXEL 9 461 616 767 BOSCH MANIFOLD-PRESSURE COMP. 9461616767 1467601920 8971380520


 

Information manifold-pressure comp.

BOSCH 9 461 616 767 9461616767
ZEXEL 146760-1920 1467601920
ISUZU 8971380520 8971380520
146760-1920 MANIFOLD-PRESSURE COMP.
Rating:
24
Buy MANIFOLD-PRESSURE COMP. 146760-1920 zexel genuine, new aftermarket engine parts with delivery

Include in ###:

Number on scheme 67
MANIFOLD-PRESSURE COMP.
1047461093 as MANIFOLD-PRESSURE COMP.

Cross reference number

Zexel num
Bosch num
Firm num
Name
146760-1920 
9 461 616 767 
8971380520  ISUZU
MANIFOLD-PRESSURE COMP.
K 11FV BOOST COMPENSATOR parts(VE) Others




Information:

Start By:a. remove flywheelb. remove crankshaft rear seal and wear sleeve **Remove the crankshaft rear seal and wear sleeve only if the engine is equipped with the later design seal. The later design seal can be identified by the rotation marks on the seal.
Some flywheel housings will have more bolts holding the flywheel housing to the cylinder block.
1. If the engine is equipped with an electric starting motor, remove the electric starting motor from the flywheel housing.2. Remove the bolts that hold the oil pan plate to the flywheel housing. Loosen the bolts that hold the oil pan plate to the cylinder block.3. Install spacers between the oil pan plate and the cylinder block to hold the oil pan plate away from the flywheel housing.
3306 Engine Shown4. On 3306 Engines, remove turbocharger oil drain pipe (1).5. Install Tool (A) on the flywheel housing as shown, and fasten a hoist to it.6. Remove all bolts (2) and the flywheel housing from the engine. The weight of the flywheel housing is 37 kg (82 lb).Install Flywheel Housing
3306 Engine Shown1. Install Tool (A) on the flywheel housing. Fasten a hoist to the flywheel housing. 2. Put the gasket and flywheel housing in position on the engine. Install bolts (2) that hold it. Tighten the bolts to a torque of 100 14 N m (74 10 lb ft) as shown.3. Remove Tool (A) from the flywheel housing.4. On 3306 Engines, install turbocharger oil drain line (1).5. Cut the bottom of the flywheel housing gasket off even with the cylinder block and flywheel housing. Put 3S6252 RTV Silicone Adhesive/Sealant on the bottom of the gasket where it makes contact with the oil pan plate gasket.6. Remove the spacers from between the oil pan plate and the cylinder block. Install the bolts that hold the oil pan plate to the flywheel housing. Tighten the bolts that hold the oil pan plate to the cylinder block.7. If the engine is equipped with an electric starting motor, install it on the flywheel housing.End By:a. install crankshaft rear seal and wear sleeveb. install flywheel

Have questions with 146760-1920?





Group cross 146760-1920 ZEXEL

Isuzu 

146760-1920  
9 461 616 767 
8971380520 
MANIFOLD-PRESSURE COMP.
Back to top