Information lever group
BOSCH
9 421 611 592
9421611592
ZEXEL
159252-1121
1592521121
ISUZU
1157255220
1157255220

Rating:
Include in ###:
Cross reference number
Zexel num
Bosch num
Firm num
Name
159252-1121
9 421 611 592
1157255220 ISUZU
LEVER GROUP
K 14GJ LEVER ASSY GOV
K 14GJ LEVER ASSY GOV
159252-1121
9 421 611 592
223093140A HINO
LEVER GROUP
K 14GJ LEVER ASSY GOV
K 14GJ LEVER ASSY GOV
159252-1121
9 421 611 592
19334Z9202 NISSAN-DIESEL
LEVER GROUP
K 14GJ LEVER ASSY GOV
K 14GJ LEVER ASSY GOV
159252-1121
9 421 611 592
SL7013VN0A MAZDA
LEVER GROUP
K 14GJ LEVER ASSY GOV
K 14GJ LEVER ASSY GOV
Information:
Thermostat Removal
Stop engine.Disconnect negative (-) battery cable at battery.
Do not drain engine coolant until the coolant temperature is below operating temperature. Then loosen drain cock slowly to relieve any excess pressure.
Remove coolant from cooling system.
Fig. 1-Thermostat CoverDisconnect upper radiator hose from thermostat cover (Fig. 1).Remove thermostat cover.Remove gasket.
Fig. 2-ThermostatLift thermostat (Fig. 2) out of thermostat housing.Repair
Fig. 3-Thermostat OpenIf engine is running too hot or too cold inspect thermostat for defects. Test in hot water for proper opening and closing.Installation
Some thermostats are marked "TO RAD", "THIS SIDE TOWARD RADIATOR", or "TOWARD RADIATOR" to indicate the top side. Put thermostat in housing so that top side is toward thermostat cover.
Fig. 4-Top SideIf thermostat is not marked, find the top side (Fig. 4). Put thermostat in housing so that top side is toward thermostat cover.
Fig. 5-Cap ScrewUsing a new gasket, install thermostat cover. Put cap screws (Fig. 5) through thermostat cover into thermostat housing. Tighten cap screws to 35 lb-ft (47 N m) (5 kg-m).Connect upper radiator hose to thermostat cover.Fill cooling system to proper level with proper coolant.Connect negative (-) battery cable to battery negative (-) terminal.Start engine.Check for leaks at hose connection and around gasket area.
Stop engine.Disconnect negative (-) battery cable at battery.
Do not drain engine coolant until the coolant temperature is below operating temperature. Then loosen drain cock slowly to relieve any excess pressure.
Remove coolant from cooling system.
Fig. 1-Thermostat CoverDisconnect upper radiator hose from thermostat cover (Fig. 1).Remove thermostat cover.Remove gasket.
Fig. 2-ThermostatLift thermostat (Fig. 2) out of thermostat housing.Repair
Fig. 3-Thermostat OpenIf engine is running too hot or too cold inspect thermostat for defects. Test in hot water for proper opening and closing.Installation
Some thermostats are marked "TO RAD", "THIS SIDE TOWARD RADIATOR", or "TOWARD RADIATOR" to indicate the top side. Put thermostat in housing so that top side is toward thermostat cover.
Fig. 4-Top SideIf thermostat is not marked, find the top side (Fig. 4). Put thermostat in housing so that top side is toward thermostat cover.
Fig. 5-Cap ScrewUsing a new gasket, install thermostat cover. Put cap screws (Fig. 5) through thermostat cover into thermostat housing. Tighten cap screws to 35 lb-ft (47 N m) (5 kg-m).Connect upper radiator hose to thermostat cover.Fill cooling system to proper level with proper coolant.Connect negative (-) battery cable to battery negative (-) terminal.Start engine.Check for leaks at hose connection and around gasket area.
Have questions with 159252-1121?
Group cross 159252-1121 ZEXEL
Nissan-Diesel
Mazda
Isuzu
159252-1121
9 421 611 592
1157255220
LEVER GROUP
Hino
159252-1121
9 421 611 592
223093140A
LEVER GROUP
Nissan-Diesel
159252-1121
9 421 611 592
19334Z9202
LEVER GROUP
Mazda
159252-1121
9 421 611 592
SL7013VN0A
LEVER GROUP