Information injector
ZEXEL
107755-0360
1077550360
MITSUBISHI
ME226793
me226793
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
4Pcs Fuel Injector ME226793 Compatible with Mitsubishi Fuso 4M50 FE140 FE145 FE145CC FE180
Starhycfa Product name:Fuel Injection || Part Number:ME226793 || APPlication:Compatible with Mitsubishi Fuso 4M50 FE140 FE145 FE145CC FE180 || 1.Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || 2.Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.
Starhycfa Product name:Fuel Injection || Part Number:ME226793 || APPlication:Compatible with Mitsubishi Fuso 4M50 FE140 FE145 FE145CC FE180 || 1.Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || 2.Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.
Fuel Injector ME226793 Compatible with Mitsubishi Fuso 4M50 FE140 FE145 FE145CC FE180
Starhycfa Product name:Fuel Injection || Part Number:ME226793 || APPlication:Compatible with Mitsubishi Fuso 4M50 FE140 FE145 FE145CC FE180 || 1.Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || 2.Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.
Starhycfa Product name:Fuel Injection || Part Number:ME226793 || APPlication:Compatible with Mitsubishi Fuso 4M50 FE140 FE145 FE145CC FE180 || 1.Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || 2.Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.
Jeimgrso 3 PCS Fuel Injector 0-445-120-076 0445120076 Compatible With Mitsubishi 4M50 Engine ME226793 107755-0360
Jeimgrso Item Type: 0-445-120-076 Fuel Injector || Part number: 0-445-120-076 0445120076 || Application: Fits For Mitsubishi 4M50 Engine || Note:1.We Only Ship To Confirmed Order Addresses；Your Order Address Must Match Your Shipping Address || Note:2.in Order To Avoid Unnecessary Return；please Check The Product Picture And Part Number Carefully To Make Sure It Is The Product You Want
Jeimgrso Item Type: 0-445-120-076 Fuel Injector || Part number: 0-445-120-076 0445120076 || Application: Fits For Mitsubishi 4M50 Engine || Note:1.We Only Ship To Confirmed Order Addresses；Your Order Address Must Match Your Shipping Address || Note:2.in Order To Avoid Unnecessary Return；please Check The Product Picture And Part Number Carefully To Make Sure It Is The Product You Want
You can express buy:
USD 1285.7
30-08-2022
30-08-2022
4pcs ME226793 0445120076 Fuel Injectors for Mitsubishi Fuso FE 4M50 Engine Common Rail Diesel Injector Power Tool Accessories
USD 815
11-11-2022
11-11-2022
Cross reference number
Zexel num
Bosch num
Firm num
Name
107755-0360
ME226793 MITSUBISHI
INJECTOR
A * C 55KE
A * C 55KE
Information:
Start By:a. remove oil pan 1. Remove bolts (1) that hold main bearing cap (2) in place. Remove main cap (2).2. Remove the bearing half from the cap.
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either or both the crankshaft and cylinder block.
3. Remove the upper half of main bearings (3) as follows: a. Turn the crankshaft until tool (A) can be installed in the crankshaft journal. Install tool (A).b. Turn the crankshaft in the direction which will push the upper main bearing out, tab end first.c. Check the condition of the bearings. See "Guideline For Reusable Parts", "Main And Connecting Rod Bearings", Form No. SEBF8009 and SEBD0531. The following steps are for the installation of the crankshaft main bearings. Put clean engine oil on the main bearings for the assembly. Also, be sure the tabs on the back side of the main bearings fit in the grooves of the main bearings caps and cylinder block.
Ensure that the bearings are installed in the correct locations. Two different part numbers are used in the quantities of three and four. The part number having the quantity of four is to be installed on crankshaft main bearings 2, 3, 5 and 6. The part number having the quantity of three is to be installed on crankshaft bearing 1, 4 and 7.
4. Clean the surfaces in the cylinder block for the main bearings. Use tool (A), and install new upper halves of main bearings (bearings with the oil hole) in the cylinder block. Do not put oil on the back of the bearing.5. Clean the mating surface of the main bearing caps for the main bearings. Install the new lower halves of the main bearings in the main caps. Do not put oil on the back of the bearing.
Main bearing caps should be installed with the part number towards the right side. Caps are to be identified by stamped numbers 1 thru 7 located on the bottom unmachined surface.
6. Put main bearing caps (2) in position on the cylinder block. put clean engine oil or molylube on the bolt threads and the washer face; then install the bolts. Tighten the bolts on the side where the main bearing tabs are located to a torque of 95 5 N m (70 4 lb ft). Tighten the bolts on the opposite side to a torque of 95 5 N m (70 4 lb ft).7. Put a mark on each bolt head and the bearing caps. Turn the bolts that are opposite the main bearing tabs an additional 90° 5° turn. Then turn the bolts on the side where the main bearing tabs are located an additional 90° 5° turn.
Typical Example8. Check the end play of the crankshaft with a dial indicator and magnetic base. The end play must be 0.10 to 0.50 mm (.004 to .020 in). The
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either or both the crankshaft and cylinder block.
3. Remove the upper half of main bearings (3) as follows: a. Turn the crankshaft until tool (A) can be installed in the crankshaft journal. Install tool (A).b. Turn the crankshaft in the direction which will push the upper main bearing out, tab end first.c. Check the condition of the bearings. See "Guideline For Reusable Parts", "Main And Connecting Rod Bearings", Form No. SEBF8009 and SEBD0531. The following steps are for the installation of the crankshaft main bearings. Put clean engine oil on the main bearings for the assembly. Also, be sure the tabs on the back side of the main bearings fit in the grooves of the main bearings caps and cylinder block.
Ensure that the bearings are installed in the correct locations. Two different part numbers are used in the quantities of three and four. The part number having the quantity of four is to be installed on crankshaft main bearings 2, 3, 5 and 6. The part number having the quantity of three is to be installed on crankshaft bearing 1, 4 and 7.
4. Clean the surfaces in the cylinder block for the main bearings. Use tool (A), and install new upper halves of main bearings (bearings with the oil hole) in the cylinder block. Do not put oil on the back of the bearing.5. Clean the mating surface of the main bearing caps for the main bearings. Install the new lower halves of the main bearings in the main caps. Do not put oil on the back of the bearing.
Main bearing caps should be installed with the part number towards the right side. Caps are to be identified by stamped numbers 1 thru 7 located on the bottom unmachined surface.
6. Put main bearing caps (2) in position on the cylinder block. put clean engine oil or molylube on the bolt threads and the washer face; then install the bolts. Tighten the bolts on the side where the main bearing tabs are located to a torque of 95 5 N m (70 4 lb ft). Tighten the bolts on the opposite side to a torque of 95 5 N m (70 4 lb ft).7. Put a mark on each bolt head and the bearing caps. Turn the bolts that are opposite the main bearing tabs an additional 90° 5° turn. Then turn the bolts on the side where the main bearing tabs are located an additional 90° 5° turn.
Typical Example8. Check the end play of the crankshaft with a dial indicator and magnetic base. The end play must be 0.10 to 0.50 mm (.004 to .020 in). The
Have questions with 107755-0360?
Group cross 107755-0360 ZEXEL
Mitsubishi
Hino
Mitsubishi
Mitsubishi
107755-0360
ME226793
INJECTOR