Information injector
BOSCH
0 445 120 047
0445120047
ZEXEL
107755-0151
1077550151
MITSUBISHI
ME193289
me193289
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
0445120091 Fuel Injector 0 445 120 091 107755-0151 Automotive Parts ME192736 ME193289 ME193983，Compatible For MITSUBISHI ME193983
QINMINO Quick response: Quickly adjust the fuel injection quantity and time according to changes in operating conditions to ensure stable engine performance. || Strong adaptability: compatible with multiple fuel grades and types, meeting the needs of different vehicles. || Stable idle: Inject fuel steadily during idle to ensure smooth engine operation, reduce shaking and stall probability. || Cold start optimization: In cold weather, it is possible to increase the fuel injection amount appropriately, improve the mixture concentration, and assist the engine in starting smoothly. || Extended lifespan: Good fuel injection reduces engine carbon deposits, reduces wear, and prolongs engine service life.
QINMINO Quick response: Quickly adjust the fuel injection quantity and time according to changes in operating conditions to ensure stable engine performance. || Strong adaptability: compatible with multiple fuel grades and types, meeting the needs of different vehicles. || Stable idle: Inject fuel steadily during idle to ensure smooth engine operation, reduce shaking and stall probability. || Cold start optimization: In cold weather, it is possible to increase the fuel injection amount appropriately, improve the mixture concentration, and assist the engine in starting smoothly. || Extended lifespan: Good fuel injection reduces engine carbon deposits, reduces wear, and prolongs engine service life.
0445120091 0 445 120 091 107755-0151 .Fuel Injector.Compatible For MITSUBISHI ME193983 ME192736 ME193289 ME193983
SLWHHDBT 1.Compatible For MITSUBISHI ME193983 ME192736 ME193289 ME193983 || 2. Excellent fuel atomization effect: Using advanced technology, it can fine atomize fuel, make fuel and air fully mixed, improve combustion efficiency, and provide more powerful power output for the engine || 3. High-quality materials: The selection of high-quality materials carefully made, with excellent wear resistance, can work stably for a long time, extend service life, reduce the frequency of replacement || 4. Improve driving performance: Optimized injection design helps improve engine response speed and fuel economy, allowing the vehicle to accelerate more smoothly and drive more smoothly, giving you a better driving experience || 5. Strict quality inspection: Through the strict quality inspection process, to ensure that every fuel injector can achieve excellent performance and quality, so that you can rest assured
SLWHHDBT 1.Compatible For MITSUBISHI ME193983 ME192736 ME193289 ME193983 || 2. Excellent fuel atomization effect: Using advanced technology, it can fine atomize fuel, make fuel and air fully mixed, improve combustion efficiency, and provide more powerful power output for the engine || 3. High-quality materials: The selection of high-quality materials carefully made, with excellent wear resistance, can work stably for a long time, extend service life, reduce the frequency of replacement || 4. Improve driving performance: Optimized injection design helps improve engine response speed and fuel economy, allowing the vehicle to accelerate more smoothly and drive more smoothly, giving you a better driving experience || 5. Strict quality inspection: Through the strict quality inspection process, to ensure that every fuel injector can achieve excellent performance and quality, so that you can rest assured
ERIKC 0445120091 Fuel Injector 0 445 120 091 107755-0151 Automotive Parts ME192736 ME193289 ME193983 Compatible For MITSUBISHI ME193983
YWQGNDJZ Quick to install and easy to use. || Made of high-quality materials and practical. || New and nice qulity, Easy install and durable use. || Made of high-quality materials, anti-corrosion, wear-resistant, and non-deformation. || ERIKC 0445120091 Fuel Injector 0 445 120 091 107755-0151 Automotive Parts ME192736 ME193289 ME193983 Compatible For MITSUBISHI ME193983
YWQGNDJZ Quick to install and easy to use. || Made of high-quality materials and practical. || New and nice qulity, Easy install and durable use. || Made of high-quality materials, anti-corrosion, wear-resistant, and non-deformation. || ERIKC 0445120091 Fuel Injector 0 445 120 091 107755-0151 Automotive Parts ME192736 ME193289 ME193983 Compatible For MITSUBISHI ME193983
You can express buy:
USD 30.24
24-06-2025
24-06-2025
4PCS New Made China F00RJ01334 Diesel Injector Valve Assembly F 00R J01 334 For 0445120047 0445120091 0445120093 Injector
USD 638.96
23-06-2025
23-06-2025
4PC 0445120091 Common Rail Injector 0 445 120 091 107755-0151 Diesel Engine Nozzle for MITSUBISHI ME193983 ME192736 ME193289
Images:
USD 159.99
[19-May-2025]
USD 17.99
[19-May-2025]
USD 104.92
[14-Jun-2025]
Cross reference number
Zexel num
Bosch num
Firm num
Name
107755-0151
0 445 120 047
ME193289 MITSUBISHI
INJECTOR
* C 55KK INJECTOR
* C 55KK INJECTOR
Information:
ACTIVE Diagnostic Codes
Diagnostic codes are used by the PEEC III system to warn the vehicle operator of a problem and indicate to the service technician the nature of the problem. Some codes are used only to record an event, and do not indicate problems.An ACTIVE Diagnostic code represents a problem that should be investigated and corrected AS SOON AS POSSIBLE. Repairing the cause of an ACTIVE code will cause the code to be cleared from the ACTIVE Diagnostic Code screen.When an ACTIVE code is generated, the PEEC III lamp will turn ON and remain ON, blinking every five seconds. If the condition generating the fault occurs only for a brief moment, the lamp will go OFF after five seconds and the fault will be LOGGED. After a problem has been investigated and corrected, the related diagnostic code should be cleared from memory.ACTIVE codes may be viewed using either of the electronic service tools (ECAP or DDT), and may also be viewed using the diagnostic lamp and cruise control switches. The diagnostic lamp should not be confused with the warning lamp which is used with PEEC III engine protection.Using The ECAP Or DDT To Display ACTIVE Codes
A. With key OFF, install an ECAP or DDT into the PEEC III system.B. Turn key ON (engine does not need to be started to view codes).C. Refer to the Operating Manual and Special Instructions for the service tool (listed under PEEC III Service Tools) to read the code(s). On the ECAP, the display menu will direct you to the proper screen to display diagnostic messages similar to the example below.Using The Cruise Control Switches To Display ACTIVE Codes:
A. Turn key ON (engine does not need to be started to view codes).B. The PEEC III Diagnostic Lamp will turn ON for five seconds, blink OFF for 1/10 second, turn ON again for five seconds, then OFF for five seconds. At the end of that time, the lamp will begin to flash the first number of the two-digit code (count the flashes). After two seconds OFF, then it will flash the second digit. If two or more codes are present, they will follow the first after a few seconds and be displayed in the same manner.C. Active Diagnostic codes may be displayed at any time by using cruise control switches. With key ON or engine running, turn the cruise control ON/OFF switch to OFF, and move the SET/RESUME switch to RESUME position. Once the codes begin to flash the switch may be released. The PEEC III Diagnostic Lamp will flash out all the codes that are currently active, or intermittent codes that have occurred since the key was turned on. LOGGED Diagnostic Codes
When an ECM generates a diagnostic code, it usually logs the code in permanent memory within the ECM. The time the code occurred (in hours on the internal diagnostic clock) is logged along with the code. The logged codes can then be later retrieved or erased using an ECAP or DDT service
Diagnostic codes are used by the PEEC III system to warn the vehicle operator of a problem and indicate to the service technician the nature of the problem. Some codes are used only to record an event, and do not indicate problems.An ACTIVE Diagnostic code represents a problem that should be investigated and corrected AS SOON AS POSSIBLE. Repairing the cause of an ACTIVE code will cause the code to be cleared from the ACTIVE Diagnostic Code screen.When an ACTIVE code is generated, the PEEC III lamp will turn ON and remain ON, blinking every five seconds. If the condition generating the fault occurs only for a brief moment, the lamp will go OFF after five seconds and the fault will be LOGGED. After a problem has been investigated and corrected, the related diagnostic code should be cleared from memory.ACTIVE codes may be viewed using either of the electronic service tools (ECAP or DDT), and may also be viewed using the diagnostic lamp and cruise control switches. The diagnostic lamp should not be confused with the warning lamp which is used with PEEC III engine protection.Using The ECAP Or DDT To Display ACTIVE Codes
A. With key OFF, install an ECAP or DDT into the PEEC III system.B. Turn key ON (engine does not need to be started to view codes).C. Refer to the Operating Manual and Special Instructions for the service tool (listed under PEEC III Service Tools) to read the code(s). On the ECAP, the display menu will direct you to the proper screen to display diagnostic messages similar to the example below.Using The Cruise Control Switches To Display ACTIVE Codes:
A. Turn key ON (engine does not need to be started to view codes).B. The PEEC III Diagnostic Lamp will turn ON for five seconds, blink OFF for 1/10 second, turn ON again for five seconds, then OFF for five seconds. At the end of that time, the lamp will begin to flash the first number of the two-digit code (count the flashes). After two seconds OFF, then it will flash the second digit. If two or more codes are present, they will follow the first after a few seconds and be displayed in the same manner.C. Active Diagnostic codes may be displayed at any time by using cruise control switches. With key ON or engine running, turn the cruise control ON/OFF switch to OFF, and move the SET/RESUME switch to RESUME position. Once the codes begin to flash the switch may be released. The PEEC III Diagnostic Lamp will flash out all the codes that are currently active, or intermittent codes that have occurred since the key was turned on. LOGGED Diagnostic Codes
When an ECM generates a diagnostic code, it usually logs the code in permanent memory within the ECM. The time the code occurred (in hours on the internal diagnostic clock) is logged along with the code. The logged codes can then be later retrieved or erased using an ECAP or DDT service
Have questions with 107755-0151?
Group cross 107755-0151 ZEXEL
Bosch
Bosch
Mitsubishi
107755-0151
0 445 120 047
ME193289
INJECTOR