109342-4060 ZEXEL 0 470 504 039 BOSCH INJECTION-PUMP ASSEMBLY 0470504039 1093424060 167002x901

Information injection-pump assembly

BOSCH 0 470 504 039 0470504039

ZEXEL 109342-4060 1093424060

NISSAN-DIESEL 167002X901 167002x901

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 109342-4060 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	109342-4060
1.	_
2.	FUEL INJECTION PUMP	109242-4051
3.	NUMBER PLATE
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105118-7982
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)	19.0{194}/37.5{382}
10.	NOZZLE-HOLDER	105048-4120
11.	NOZZLE	105017-3060

Scheme ###:

3.	[1]	149351-0201	PACKING RING
7.	[1]	149050-0220	SUPPLY PUMP
9.	[1]	149055-0000	SUPPORT RING
10.	[4]	149330-2000	TORX SCREW
12.	[1]	149100-0520	DRIVE SHAFT
17/1.	[1]	149110-0000	SHIM D42.5627.1T2.2
17/1B.	[1]	149110-0100	SHIM D42.5&27.1T2.3
17/1C.	[1]	149110-0200	SHIM D42.5&27.1T2.4
17/1D.	[1]	149110-0300	SHIM D42.5&27.1T2.5
17/1E.	[1]	149110-0400	SHIM D42.5&27.1T2.6
17/1F.	[1]	149110-0500	SHIM D42.5&27.1T2.7
17/1G.	[1]	149110-0600	SHIM D42.5&27.1T2.8
17/1H.	[1]	149110-0700	SHIM D42.5&27.1T2.9
17/1I.	[1]	149110-0800	SHIM D42.5&27.1T3.0
17/1J.	[1]	149110-0900	SHIM D42.5&27.1T3.1
17/1K.	[1]	149110-1000	SHIM D42.5&27.1T3.2
17B/1.	[1]	149110-1200	SHIM D42.5&27.1T2.2
17B/1B.	[1]	149110-1300	SHIM D42.5&27.1T2.3
17B/1C.	[1]	149110-1400	SHIM D42.5&27.1T2.4
17B/1D.	[1]	149110-1500	SHIM D42.5&27.1T2.5
17B/1E.	[1]	149110-1600	SHIM D42.5&27.1T2.6
17B/1F.	[1]	149110-1700	SHIM D42.5&27.1T2.7
17B/1G.	[1]	149110-1800	SHIM D42.5&27.1T2.8
17B/1H.	[1]	149110-1900	SHIM D42.5&27.1T2.9
17B/1I.	[1]	149110-2000	SHIM D42.5&27.1T3.0
17B/1J.	[1]	149110-2100	SHIM D42.5&27.1T3.1
17B/1K.	[1]	149110-2200	SHIM D42.5&27.1T3.2
19.	[1]	149111-0000	DRIVER DISC
20.	[1]	149120-0120	CAM RING
21.	[2]	149112-0200	ROLLER SHOE
22.	[2]	149113-0300	ROLLER
23.	[1]	149111-0100	PLATE
25.	[1]	149114-0000	BEARING PLATE
30.	[1]	149350-3300	O-RING
35.	[1]	149170-0022	HYDRAULIC STOPPER
36.	[1]	149350-3400	O-RING
37.	[1]	149180-0300	CLOSING COVER
38.	[2]	149330-2900	TORX BOLT
39.	[1]	149350-1700	SEAL RING
42.	[1]	149164-0000	COILED SPRING
49.	[4]	149330-3900	TORX BOLT
50.	[1]	149200-0921	HYDRAULIC HEAD
51.	[3]	149350-2000	O-RING
54.	[4]	149313-2700	GASKET
58.	[4]	149305-0020	RESTRICTION
61.	[3]	149330-3400	TORX BOLT
62.	[1]	149436-0100	PLATE
63.	[1]	149350-1900	O-RING
104.	[2]	149330-3500	HEX-SOCKET-HEAD CAP SCREW
104.	[2]	149330-3500	HEX-SOCKET-HEAD CAP SCREW
105.	[2]	149443-0200	GASKET
105.	[2]	149443-0200	GASKET
107.	[1]	149403-0320	SENSOR
107B.	[1]	149403-0520	SENSOR
109.	[3]	149330-1600	TORX BOLT
111.	[2]	149330-0501	TORX SCREW
123.	[5]	149330-3900	TORX BOLT
127.	[1]	149350-2800	SEAL RING
133.	[1]	149350-3500	O-RING
134.	[1]	149350-3600	O-RING
135.	[1]	149060-0520	CONTROL VALVE
206.	[1]	149330-2500	UNION NUT
207.	[1]	149412-0100	PLAIN WASHER
243.	[1]	149330-3500	HEX-SOCKET-HEAD CAP SCREW
244.	[1]	149443-0200	GASKET
270.	[1]	149411-2600	COUPLING PLATE
271/1.	[1]	149411-1300	SHIM T0.5
271/1B.	[1]	149411-1400	SHIM T0.6
271/1C.	[1]	149411-1500	SHIM T0.7
271/1D.	[1]	149411-1600	SHIM T0.8
271/1E.	[1]	149411-1700	SHIM T0.9
271/1F.	[1]	149411-1800	SHIM T1.0
271/1G.	[1]	149411-1900	SHIM T1.1
271/1H.	[1]	149411-2000	SHIM T1.2
271/1I.	[1]	149411-2100	SHIM T1.3
271/1J.	[1]	149411-2200	SHIM T1.4
271/1K.	[1]	149411-2300	SHIM T1.5
271B/1.	[1]	149411-4000	SHIM T0.5
271B/1B.	[1]	149411-4100	SHIM T0.6
271B/1C.	[1]	149411-4200	SHIM T0.7
271B/1D.	[1]	149411-4300	SHIM T0.8
271B/1E.	[1]	149411-4400	SHIM T0.9
271B/1F.	[1]	149411-4500	SHIM T1.0
271B/1G.	[1]	149411-4600	SHIM T1.1
271B/1H.	[1]	149411-4700	SHIM T1.2
271B/1I.	[1]	149411-4800	SHIM T1.3
271B/1J.	[1]	149411-4900	SHIM T1.4
271B/1K.	[1]	149411-5000	SHIM T1.5
392.	[1]	149350-3700	O-RING
393.	[1]	149419-0600	BLEEDER SCREW
394.	[1]	149420-0001	INTERMEDIATE PLATE
400.	[1]	149460-1300	CABLE CRAMP
425.	[2]	149330-3300	TORX BOLT
471.	[1]	149410-0000	COVER
480.	[1]	149350-3800	SEAL RING
800S.	[1]	149480-0220	SERVICE PARTS GROUP
801S.	[1]	149481-0420	PARTS SET
804S.	[1]	149483-0020	PARTS SET
804S/14.	[1]	149350-1800	O-RING
804S/15.	[1]	149350-1900	O-RING
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
902.	[1]	149433-0720	OUTLET PIPE ASSY
902/1.	[1]	149070-0120	OVER FLOW VALVE
902/2.	[1]	149430-0220	INLET UNION
902/3.	[2]	149350-2700	FLAT SEAL RING
903.	[1]	149428-0720	INLET PIPE
903/1.	[1]	149330-0000	EYE BOLT
903/2.	[1]	149425-1220	INLET UNION
903/3.	[2]	149350-2600	FLAT SEAL RING

Include in #2:

109342-4060 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num

Bosch num

Firm num

Name

109342-4060

0 470 504 039

167002X901 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
ZD30ETI K 13CJ INJECTION PUMP ASSY VP44 VP44

Information:

start by:a) remove turbocharger 1. Put the turbocharger in position on tool (A).2. Put a mark on the compressor cover and housings for installation purpose.3. Remove bolts (1) and plates from compressor housing.4. Remove the compressor housing. 5. Remove bolts (2) and locks from turbine housing.6. Remove cartridge (3) from turbine housing. 7. Install tool (B) in tool (C). Install cartridge in tool (C).8. Remove nut (4) from the compressor wheel.
When the nut is loosened, do not put a side force on the shaft.
9. Install tool (D) on an oil heater. Heat the oil to 350°F (177°C). Install the cartridge on tool (D) with only the compressor wheel in the hot oil. Keep the compressor wheel in the hot oil for ten minutes. 10. Put tool (D) and cartridge on tool (E) under a press. Install driver (F) and push the shaft out of the compressor wheel. Step 10 must be done before the compressor wheel gets cold.11. Remove compressor wheel and shroud. Remove turbine wheel and shaft. 12. Remove the four bolts (5) and locks from plate (6). 13. Remove plate (6), spacer, collar and thrust bearing from cartridge.14. Remove seal from plate and ring from spacer. 15. Remove bearing (7), washer (11) and snap ring (8) from compressor side of cartridge.16. Remove snap ring (13), washer (10), bearing (12) and snap ring (9) from turbine side of cartridge.17. Check all the parts of the turbocharger for damage. If the parts have damage, use new parts for replacement. See SPECIAL INSTRUCTION, Form No. SMHS6854 for TURBOCHARGER RECONDITIONING. Also see GUIDELINE FOR REUSABLE PARTS, Form No. SEBF8018.Assemble Turbocharger
1. Make sure all oil passages are open and clean. Put clean engine oil on all parts before assembly. 2. Install snap ring (6), bearing (3), washer (7) and snap ring (4) in turbine side of cartridge. Install the two snap rings with tool (A). Install the snap rings with the rounded edge toward the bearing.3. Install snap ring (2), washer (5) and bearing (1) in compressor side of cartridge. 4. Install seal (12) on plate (8) and ring (9) on spacer.5. Install collar (10) in plate and spacer (11) in collar. 6. Install thrust bearing (13) with the three radial grooves toward the outside.7. Install plate (8), bolts and locks. Tighten bolts to a torque of 35 5 lb.in. (3.95 0.6 N m). 8. Install ring (14) on turbine wheel.9. Install turbine wheel and shaft in cartridge. Be careful not to break ring (14) when installing shaft. 10. Put cartridge on tool (C) and tool (C) on tool (B). Some compressor wheels (15) can be installed