109341-2042 ZEXEL 9 461 628 615 BOSCH INJECTION-PUMP ASSEMBLY 9461628615 1093412042 167005m361

Information injection-pump assembly

BOSCH 9 461 628 615 9461628615

ZEXEL 109341-2042 1093412042

NISSAN 167005M361 167005m361

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 109341-2042 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	109341-2042
1.	_
2.	FUEL INJECTION PUMP	109241-2042
3.	NUMBER PLATE
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105118-8180
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)	21.0{214}/39.5{403}
10.	NOZZLE-HOLDER
11.	NOZZLE

Scheme ###:

3.	[1]	149351-0100	PACKING RING
3B.	[1]	149351-0201	PACKING RING
7.	[1]	149050-0220	SUPPLY PUMP
9.	[1]	149055-0000	SUPPORT RING
10.	[4]	149330-2000	TORX SCREW
12.	[1]	149100-0520	DRIVE SHAFT
17/1.	[1]	149110-0000	SHIM D42.5627.1T2.2
17/1B.	[1]	149110-0100	SHIM D42.5&27.1T2.3
17/1C.	[1]	149110-0200	SHIM D42.5&27.1T2.4
17/1D.	[1]	149110-0300	SHIM D42.5&27.1T2.5
17/1E.	[1]	149110-0400	SHIM D42.5&27.1T2.6
17/1F.	[1]	149110-0500	SHIM D42.5&27.1T2.7
17/1G.	[1]	149110-0600	SHIM D42.5&27.1T2.8
17/1H.	[1]	149110-0700	SHIM D42.5&27.1T2.9
17/1I.	[1]	149110-0800	SHIM D42.5&27.1T3.0
17/1J.	[1]	149110-0900	SHIM D42.5&27.1T3.1
17/1K.	[1]	149110-1000	SHIM D42.5&27.1T3.2
17B/1.	[1]	149110-1200	SHIM D42.5&27.1T2.2
17B/1B.	[1]	149110-1300	SHIM D42.5&27.1T2.3
17B/1C.	[1]	149110-1400	SHIM D42.5&27.1T2.4
17B/1D.	[1]	149110-1500	SHIM D42.5&27.1T2.5
17B/1E.	[1]	149110-1600	SHIM D42.5&27.1T2.6
17B/1F.	[1]	149110-1700	SHIM D42.5&27.1T2.7
17B/1G.	[1]	149110-1800	SHIM D42.5&27.1T2.8
17B/1H.	[1]	149110-1900	SHIM D42.5&27.1T2.9
17B/1I.	[1]	149110-2000	SHIM D42.5&27.1T3.0
17B/1J.	[1]	149110-2100	SHIM D42.5&27.1T3.1
17B/1K.	[1]	149110-2200	SHIM D42.5&27.1T3.2
19.	[1]	149111-0000	DRIVER DISC
20.	[1]	149120-1120	CAM RING
21.	[2]	149112-0200	ROLLER SHOE
22.	[2]	149113-0200	ROLLER
23.	[1]	149111-0100	PLATE
25.	[1]	149114-0000	BEARING PLATE
30.	[1]	149350-3300	O-RING
35.	[1]	149170-0022	HYDRAULIC STOPPER
36.	[1]	149350-3400	O-RING
37.	[1]	149180-0300	CLOSING COVER
38.	[2]	149330-2900	TORX BOLT
39.	[1]	149350-1700	SEAL RING
42.	[1]	149164-0000	COILED SPRING
49.	[4]	149330-3900	TORX BOLT
50.	[1]	149200-0723	HYDRAULIC HEAD
51.	[3]	149350-2000	O-RING
54.	[4]	149313-2700	GASKET
58.	[4]	149300-1120	PRESSURE-CONTROL VALVE
61.	[3]	149330-3400	TORX BOLT
62.	[1]	149436-0100	PLATE
63.	[1]	149350-1900	O-RING
67.	[1]	149404-0220	PSG
104.	[2]	149330-3500	HEX-SOCKET-HEAD CAP SCREW
104.	[2]	149330-3500	HEX-SOCKET-HEAD CAP SCREW
105.	[2]	149443-0200	GASKET
105.	[2]	149443-0200	GASKET
107.	[1]	149403-0320	SENSOR
107B.	[1]	149403-0520	SENSOR
109.	[3]	149330-1600	TORX BOLT
111.	[2]	149330-0501	TORX SCREW
123.	[5]	149330-3900	TORX BOLT
127.	[1]	149350-2800	SEAL RING
133.	[1]	149350-3500	O-RING
134.	[1]	149350-3600	O-RING
135.	[1]	149060-0520	CONTROL VALVE
206.	[1]	149413-0200	UNION NUT
207.	[1]	149412-0100	PLAIN WASHER
243.	[1]	149330-3500	HEX-SOCKET-HEAD CAP SCREW
244.	[1]	149443-0200	GASKET
270.	[1]	149411-2500	COUPLING PLATE
271/1.	[1]	149411-0200	SHIM T0.5
271/1B.	[1]	149411-0300	SHIM T0.6
271/1C.	[1]	149411-0400	SHIM T0.7
271/1D.	[1]	149411-0500	SHIM T0.8
271/1E.	[1]	149411-0600	SHIM T0.9
271/1F.	[1]	149411-0700	SHIM T1.0
271/1G.	[1]	149411-0800	SHIM T1.1
271/1H.	[1]	149411-0900	SHIM T1.2
271/1I.	[1]	149411-1000	SHIM T1.3
271/1J.	[1]	149411-1100	SHIM T1.4
271/1K.	[1]	149411-1200	SHIM T1.5
271B/1.	[1]	149411-2800	SHIM T0.5
271B/1B.	[1]	149411-2900	SHIM T0.6
271B/1C.	[1]	149411-3000	SHIM T0.7
271B/1D.	[1]	149411-3100	SHIM T0.8
271B/1E.	[1]	149411-3200	SHIM T0.9
271B/1F.	[1]	149411-3300	SHIM T1.0
271B/1G.	[1]	149411-3400	SHIM T1.1
271B/1H.	[1]	149411-3500	SHIM T1.2
271B/1I.	[1]	149411-3600	SHIM T1.3
271B/1J.	[1]	149411-3700	SHIM T1.4
271B/1K.	[1]	149411-3800	SHIM T1.5
392.	[1]	149350-3700	O-RING
393.	[1]	149419-0600	BLEEDER SCREW
394.	[1]	149420-0001	INTERMEDIATE PLATE
400.	[1]	149460-1300	CABLE CRAMP
425.	[2]	149330-3300	TORX BOLT
471.	[1]	149410-0000	COVER
480.	[1]	149350-3800	SEAL RING
800S.	[1]	149480-0220	SERVICE PARTS GROUP
801S.	[1]	149481-0320	PARTS SET
804S.	[1]	149483-0020	PARTS SET
804S/14.	[1]	149350-1800	O-RING
804S/15.	[1]	149350-1900	O-RING
805S.	[1]	149482-0020	PARTS SET
805S.	[1]	149482-0020	PARTS SET
805S.	[1]	149482-0020	PARTS SET
805S.	[1]	149482-0020	PARTS SET
805S.	[1]	149482-0020	PARTS SET
805S.	[1]	149482-0020	PARTS SET
805S.	[1]	149482-0020	PARTS SET
805S.	[1]	149482-0020	PARTS SET
902.	[1]	149070-0021	OVER FLOW VALVE
903.	[1]	149330-0000	EYE BOLT
904.	[1]	146669-4420	INLET UNION
905.	[1]	146669-4320	INLET UNION
906.	[2]	149350-2600	FLAT SEAL RING
906.	[2]	149350-2600	FLAT SEAL RING
907.	[2]	149350-2700	FLAT SEAL RING
907.	[2]	149350-2700	FLAT SEAL RING

Include in #2:

109341-2042 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num

Bosch num

Firm num

Name

109341-2042

9 461 628 615

167005M361 NISSAN

INJECTION-PUMP ASSEMBLY
YD1ET K

Information:

(1) Depth of bore in block for liner ... .401 .001 in.(10.19 0.03 mm) For height of liner over top of block make reference to CYLINDER LINER PROJECTION.(2) Camshaft bearing bore (installed) ... 2.3150 .0020 in.(58.801 0.051 mm) Bore in block for camshaft bearings ... 2.5630 .0010 in.(65.100 0.025 mm)Depth to install camshaft bearings at both ends of block ... .06 .02 in.(1.5 0.5 mm) The camshaft bearing at the front of the block must be installed with oil holes in a horizontal position and joint at the top within 15° from vertical.(3) Bore in block for main bearings (standard size)(with main bearing caps torqued) ... 3.8160 .0005 in.(96.926 0.013 mm) Bore in block for main bearings .020 in. (0.51 mm oversize) ... 3.8360 .0005 in.(97.434 0.013 mm)(4) Dimension from center of main bearing bore to top of cylinder block (new) ... 15.5000 .0065 in.(393.700 0.165 mm)(5) Dimension from center of main bearing bore to bottom of cylinder block (new) ... 6.0625 .0040 in.(153.988 0.102 mm)(6) Torque for bolts holding bearing caps for main bearings: a. Put engine oil on threads and washer face.b. Tighten all bolts to ... 30 3 lb. ft.(40 4 N m)c. Put a mark on each bolt and cap.d. Tighten all bolts from mark ... 90° Install bearing caps with the part number toward the front of the engine. Be sure that the mark (number) on the bearing cap next to the bolt hole is in agreement with the mark in the cylinder block.(7) Clearance between slot in block and bearing cap (with main bearing caps torqued) ... .0017 in.(0.043 mm) loose to ... .0013 in.(0.033 mm) tight
There are holes in the bores for the main bearings, between the cylinders for piston cooler orifices. These holes must have orifices (8) installed.