109341-1031 ZEXEL 9 461 629 117 BOSCH INJECTION-PUMP ASSEMBLY 9461629117 1093411031

Information injection-pump assembly

BOSCH 9 461 629 117 9461629117

ZEXEL 109341-1031 1093411031

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 109341-1031 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	109341-1031
1.	_
2.	FUEL INJECTION PUMP	109241-1005
3.	NUMBER PLATE
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105118-8133
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)	19.0{194}/33.5{342}
10.	NOZZLE-HOLDER	105048-2270
11.	NOZZLE	105017-3000

Scheme ###:

3.	[1]	149351-0201	PACKING RING
7.	[1]	149050-0220	SUPPLY PUMP
9.	[1]	149055-0000	SUPPORT RING
10.	[4]	149330-2000	TORX SCREW
12.	[1]	149100-1120	DRIVE SHAFT
17/1.	[1]	149110-0000	SHIM D42.5627.1T2.2
17/1B.	[1]	149110-0100	SHIM D42.5&27.1T2.3
17/1C.	[1]	149110-0200	SHIM D42.5&27.1T2.4
17/1D.	[1]	149110-0300	SHIM D42.5&27.1T2.5
17/1E.	[1]	149110-0400	SHIM D42.5&27.1T2.6
17/1F.	[1]	149110-0500	SHIM D42.5&27.1T2.7
17/1G.	[1]	149110-0600	SHIM D42.5&27.1T2.8
17/1H.	[1]	149110-0700	SHIM D42.5&27.1T2.9
17/1I.	[1]	149110-0800	SHIM D42.5&27.1T3.0
17/1J.	[1]	149110-0900	SHIM D42.5&27.1T3.1
17/1K.	[1]	149110-1000	SHIM D42.5&27.1T3.2
17B/1.	[1]	149110-1200	SHIM D42.5&27.1T2.2
17B/1B.	[1]	149110-1300	SHIM D42.5&27.1T2.3
17B/1C.	[1]	149110-1400	SHIM D42.5&27.1T2.4
17B/1D.	[1]	149110-1500	SHIM D42.5&27.1T2.5
17B/1E.	[1]	149110-1600	SHIM D42.5&27.1T2.6
17B/1F.	[1]	149110-1700	SHIM D42.5&27.1T2.7
17B/1G.	[1]	149110-1800	SHIM D42.5&27.1T2.8
17B/1H.	[1]	149110-1900	SHIM D42.5&27.1T2.9
17B/1I.	[1]	149110-2000	SHIM D42.5&27.1T3.0
17B/1J.	[1]	149110-2100	SHIM D42.5&27.1T3.1
17B/1K.	[1]	149110-2200	SHIM D42.5&27.1T3.2
19.	[1]	149111-0000	DRIVER DISC
20.	[1]	149120-0820	CAM RING
21.	[2]	149112-0200	ROLLER SHOE
22.	[2]	149113-0300	ROLLER
23.	[1]	149111-0100	PLATE
25.	[1]	149114-0000	BEARING PLATE
30.	[1]	149350-3300	O-RING
35.	[1]	149170-0022	HYDRAULIC STOPPER
36.	[1]	149350-3400	O-RING
37.	[1]	149180-0101	CLOSING COVER
38.	[2]	149330-1800	TORX BOLT
39.	[1]	149350-1700	SEAL RING
42.	[1]	149164-0000	COILED SPRING
49.	[4]	149330-1900	TORX BOLT
50.	[1]	149201-0521	HYDRAULIC HEAD
51.	[3]	149350-2000	O-RING
54.	[4]	149313-2700	GASKET
58.	[4]	149300-0023	PRESSURE-CONTROL VALVE
61.	[3]	149330-2300	TORX BOLT
62.	[1]	149436-0000	PLATE
63.	[1]	149350-1900	O-RING
104.	[2]	149330-2400	HEX-SOCKET-HEAD CAP SCREW
105.	[2]	149443-0200	GASKET
107.	[1]	149403-0420	SENSOR
109.	[3]	149330-1600	TORX BOLT
111.	[2]	149330-0501	TORX SCREW
123.	[5]	149330-1700	TORX BOLT
127.	[1]	149350-2800	SEAL RING
133.	[1]	149350-3500	O-RING
134.	[1]	149350-3600	O-RING
135.	[1]	149060-0020	CONTROL VALVE
206.	[1]	149330-2500	UNION NUT
207.	[1]	149412-0000	PLAIN WASHER
243.	[1]	149330-2400	HEX-SOCKET-HEAD CAP SCREW
244.	[1]	149443-0200	GASKET
270.	[1]	149411-2500	COUPLING PLATE
271/1.	[1]	149411-0200	SHIM T0.5
271/1B.	[1]	149411-0300	SHIM T0.6
271/1C.	[1]	149411-0400	SHIM T0.7
271/1D.	[1]	149411-0500	SHIM T0.8
271/1E.	[1]	149411-0600	SHIM T0.9
271/1F.	[1]	149411-0700	SHIM T1.0
271/1G.	[1]	149411-0800	SHIM T1.1
271/1H.	[1]	149411-0900	SHIM T1.2
271/1I.	[1]	149411-1000	SHIM T1.3
271/1J.	[1]	149411-1100	SHIM T1.4
271/1K.	[1]	149411-1200	SHIM T1.5
271B/1.	[1]	149411-2800	SHIM T0.5
271B/1B.	[1]	149411-2900	SHIM T0.6
271B/1C.	[1]	149411-3000	SHIM T0.7
271B/1D.	[1]	149411-3100	SHIM T0.8
271B/1E.	[1]	149411-3200	SHIM T0.9
271B/1F.	[1]	149411-3300	SHIM T1.0
271B/1G.	[1]	149411-3400	SHIM T1.1
271B/1H.	[1]	149411-3500	SHIM T1.2
271B/1I.	[1]	149411-3600	SHIM T1.3
271B/1J.	[1]	149411-3700	SHIM T1.4
271B/1K.	[1]	149411-3800	SHIM T1.5
392.	[1]	149350-3700	O-RING
393.	[1]	149419-0100	BLEEDER SCREW
394.	[1]	149420-0000	INTERMEDIATE PLATE
394B.	[1]	149420-0100	INTERMEDIATE PLATE
400.	[1]	149460-1300	CABLE CRAMP
424B.	[1]	149402-0220	SOLENOID-OPERATED VA
425.	[2]	149330-2200	TORX BOLT
471.	[1]	149410-0000	COVER
480.	[1]	149350-3800	SEAL RING
800S.	[1]	149480-0020	SERVICE PARTS GROUP
801S.	[1]	149481-0220	PARTS SET
804S.	[1]	149483-0020	PARTS SET
804S/14.	[1]	149350-1800	O-RING
804S/15.	[1]	149350-1900	O-RING
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
902.	[1]	149433-0021	OUTLET PIPE ASSY
902/1.	[1]	149070-0120	OVER FLOW VALVE
902/2.	[1]	149430-0120	INLET UNION
902/3.	[2]	149350-2700	FLAT SEAL RING
903.	[1]	149428-0820	INLET PIPE
903/1.	[1]	149330-0000	EYE BOLT
903/2.	[1]	149425-0920	INLET UNION
903/3.	[2]	149350-2600	FLAT SEAL RING
921.	[1]	149465-0322	BRACKET
922.	[1]	149470-0300	TOOTHED GEAR
923.	[1]	149350-1400	O-RING
926.	[4]	149442-0100	BLEEDER SCREW
927.	[4]	149413-0100	UNION NUT

Include in #2:

109341-1031 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num

Bosch num

Firm num

Name

109341-1031

9 461 629 117

INJECTION-PUMP ASSEMBLY
4JA1 585 13CJ INJECTION PUMP ASSY VP44 VP44

109341-1031
109341-1032

9 461 629 117

8973775191 ISUZU

INJECTION-PUMP ASSEMBLY
4JA1 585 K 13CJ INJECTION PUMP ASSY VP44 VP44

Information:

start by:a) remove flywheel 1. Disconnect oil line (1) from the BrakeSaver housing. 2. Remove the bolts and disconnect flanges (2) from the housing. 3. Remove four bolts, manifold (3) and the gasket from the bottom of the BrakeSaver housing. 4. Install tooling (A) on the BrakeSaver housing and rotor. This prevents damage to the rotor and seals when the BrakeSaver is removed. 5. Disconnect two air lines (4) and (5) at the air compressor. 6. Install tooling (B) and fasten a hoist to it. 7. Remove three bolts (6) from the BrakeSaver housing.8. Install two 3/8"-16 NC forcing screws (7) and remove the BrakeSaver. The weight of the BrakeSaver is 168 lb. (76 kg).Install BrakeSaver
1. Install tooling (B) on the BrakeSaver.2. Install two 5/8"-11 NC x 15" guide bolts (1).3. Put BrakeSaver (3) in position with the use of tooling (A) and a hoist.4. Make an alignment of dowel (2) in the crankshaft and the hole in the BrakeSaver. 5. Connect two air lines (4) and (5) to the air compressor. 6. Put O-ring seals (6) and (8) in position on the manifold.7. Put manifold (7) in position and install the bolts. 8. Put the gaskets and manifolds (9) in position and install the bolts. 9. Connect oil line (10) to the BrakeSaver housing.Disassemble BrakeSaver
start by:a) remove BrakeSaver1. Remove tool (A) from the BrakeSaver rotor and housing. Tool (A) prevents damage to the rotor seals and rings at removal of the BrakeSaver. 2. Remove bolts (1) from gear plate (2). Remove the plate. 3. Make identification as to the location of stator (3) with housing (4). Remove bolts (5) and the stator. 4. Turn the stator over and remove spiral ring (6). 5. Turn the stator over again. Remove sleeve assembly (9). Remove O-ring seal (7) and lip type seal (8) from the sleeve. 6. Remove seal (11) from around the housing and the six smaller seals from the oil lines.7. Remove rotor assembly (12).8. Remove seal ring (10) from both sides of the rotor. 9. Remove carrier (13) and wear sleeve (14) with tooling (B) from both sides of the rotor. 10. Remove spiral ring (15). Turn the housing over and remove sleeve assembly (17). Remove the lip type seal and O-ring seal (16) from the sleeve.Assemble Brakesaver
1. Put clean SAE 30 engine oil on the O-ring seal. Install seal (2) on sleeve (1).2. Install the sleeve in the BrakeSaver housing. Make alignment of the notch in the sleeve with the notch in the housing and install the dowel.3. Turn the housing over and install the spiral ring that holds the sleeve in the housing.
Make certain there is clearance behind the spiral ring when it is correctly installed.
4. Heat the carriers and the wear sleeves to a maximum temperature of 300°F (149°C). 5. Install carrier (5) on each side of rotor (3). Install wear sleeve (4) with the taper edge of sleeve in the "UP" position. Make sure the carrier is at bottom on the rotor