109341-1030 ZEXEL F 01G 29X 061 BOSCH INJECTION-PUMP ASSEMBLY f01g29x061 1093411030 8973775190

Information injection-pump assembly

BOSCH F 01G 29X 061 f01g29x061

ZEXEL 109341-1030 1093411030

ISUZU 8973775190 8973775190

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 109341-1030 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	109341-1030
1.	_
2.	FUEL INJECTION PUMP	109241-1004
3.	NUMBER PLATE
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105118-8133
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)	19.0{194}/33.5{342}
10.	NOZZLE-HOLDER	105048-2270
11.	NOZZLE	105017-3000

Scheme ###:

3.	[1]	149351-0201	PACKING RING
7.	[1]	149050-0220	SUPPLY PUMP
9.	[1]	149055-0000	SUPPORT RING
10.	[4]	149330-2000	TORX SCREW
12.	[1]	149100-1120	DRIVE SHAFT
17/1.	[1]	149110-0000	SHIM D42.5627.1T2.2
17/1B.	[1]	149110-0100	SHIM D42.5&27.1T2.3
17/1C.	[1]	149110-0200	SHIM D42.5&27.1T2.4
17/1D.	[1]	149110-0300	SHIM D42.5&27.1T2.5
17/1E.	[1]	149110-0400	SHIM D42.5&27.1T2.6
17/1F.	[1]	149110-0500	SHIM D42.5&27.1T2.7
17/1G.	[1]	149110-0600	SHIM D42.5&27.1T2.8
17/1H.	[1]	149110-0700	SHIM D42.5&27.1T2.9
17/1I.	[1]	149110-0800	SHIM D42.5&27.1T3.0
17/1J.	[1]	149110-0900	SHIM D42.5&27.1T3.1
17/1K.	[1]	149110-1000	SHIM D42.5&27.1T3.2
17B/1.	[1]	149110-1200	SHIM D42.5&27.1T2.2
17B/1B.	[1]	149110-1300	SHIM D42.5&27.1T2.3
17B/1C.	[1]	149110-1400	SHIM D42.5&27.1T2.4
17B/1D.	[1]	149110-1500	SHIM D42.5&27.1T2.5
17B/1E.	[1]	149110-1600	SHIM D42.5&27.1T2.6
17B/1F.	[1]	149110-1700	SHIM D42.5&27.1T2.7
17B/1G.	[1]	149110-1800	SHIM D42.5&27.1T2.8
17B/1H.	[1]	149110-1900	SHIM D42.5&27.1T2.9
17B/1I.	[1]	149110-2000	SHIM D42.5&27.1T3.0
17B/1J.	[1]	149110-2100	SHIM D42.5&27.1T3.1
17B/1K.	[1]	149110-2200	SHIM D42.5&27.1T3.2
19.	[1]	149111-0000	DRIVER DISC
20.	[1]	149120-0820	CAM RING
21.	[2]	149112-0200	ROLLER SHOE
22.	[2]	149113-0300	ROLLER
23.	[1]	149111-0100	PLATE
25.	[1]	149114-0000	BEARING PLATE
30.	[1]	149350-3300	O-RING
35.	[1]	149170-0022	HYDRAULIC STOPPER
36.	[1]	149350-3400	O-RING
37.	[1]	149180-0101	CLOSING COVER
38.	[2]	149330-1800	TORX BOLT
39.	[1]	149350-1700	SEAL RING
42.	[1]	149164-0000	COILED SPRING
49.	[4]	149330-1900	TORX BOLT
50.	[1]	149201-0521	HYDRAULIC HEAD
51.	[3]	149350-2000	O-RING
54.	[4]	149313-2700	GASKET
58.	[4]	149300-0023	PRESSURE-CONTROL VALVE
61.	[3]	149330-2300	TORX BOLT
62.	[1]	149436-0000	PLATE
63.	[1]	149350-1900	O-RING
104.	[2]	149330-2400	HEX-SOCKET-HEAD CAP SCREW
105.	[2]	149443-0200	GASKET
107.	[1]	149403-0420	SENSOR
109.	[3]	149330-1600	TORX BOLT
111.	[2]	149330-0501	TORX SCREW
123.	[5]	149330-1700	TORX BOLT
127.	[1]	149350-2800	SEAL RING
133.	[1]	149350-3500	O-RING
134.	[1]	149350-3600	O-RING
135.	[1]	149060-0020	CONTROL VALVE
206.	[1]	149330-2500	UNION NUT
207.	[1]	149412-0000	PLAIN WASHER
243.	[1]	149330-2400	HEX-SOCKET-HEAD CAP SCREW
244.	[1]	149443-0200	GASKET
270.	[1]	149411-2500	COUPLING PLATE
271/1.	[1]	149411-0200	SHIM T0.5
271/1B.	[1]	149411-0300	SHIM T0.6
271/1C.	[1]	149411-0400	SHIM T0.7
271/1D.	[1]	149411-0500	SHIM T0.8
271/1E.	[1]	149411-0600	SHIM T0.9
271/1F.	[1]	149411-0700	SHIM T1.0
271/1G.	[1]	149411-0800	SHIM T1.1
271/1H.	[1]	149411-0900	SHIM T1.2
271/1I.	[1]	149411-1000	SHIM T1.3
271/1J.	[1]	149411-1100	SHIM T1.4
271/1K.	[1]	149411-1200	SHIM T1.5
271B/1.	[1]	149411-2800	SHIM T0.5
271B/1B.	[1]	149411-2900	SHIM T0.6
271B/1C.	[1]	149411-3000	SHIM T0.7
271B/1D.	[1]	149411-3100	SHIM T0.8
271B/1E.	[1]	149411-3200	SHIM T0.9
271B/1F.	[1]	149411-3300	SHIM T1.0
271B/1G.	[1]	149411-3400	SHIM T1.1
271B/1H.	[1]	149411-3500	SHIM T1.2
271B/1I.	[1]	149411-3600	SHIM T1.3
271B/1J.	[1]	149411-3700	SHIM T1.4
271B/1K.	[1]	149411-3800	SHIM T1.5
392.	[1]	149350-3700	O-RING
393.	[1]	149419-0100	BLEEDER SCREW
394.	[1]	149420-0000	INTERMEDIATE PLATE
394B.	[1]	149420-0001	INTERMEDIATE PLATE
400.	[1]	149460-1300	CABLE CRAMP
425.	[2]	149330-2200	TORX BOLT
471.	[1]	149410-0000	COVER
480.	[1]	149350-3800	SEAL RING
800S.	[1]	149480-0020	SERVICE PARTS GROUP
801S.	[1]	149481-0220	PARTS SET
804S.	[1]	149483-0020	PARTS SET
804S/14.	[1]	149350-1800	O-RING
804S/15.	[1]	149350-1900	O-RING
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
902.	[1]	149433-0021	OUTLET PIPE ASSY
902/1.	[1]	149070-0120	OVER FLOW VALVE
902/2.	[1]	149430-0120	INLET UNION
902/3.	[2]	149350-2700	FLAT SEAL RING
903.	[1]	149428-0820	INLET PIPE
903/1.	[1]	149330-0000	EYE BOLT
903/2.	[1]	149425-0920	INLET UNION
903/3.	[2]	149350-2600	FLAT SEAL RING
921.	[1]	149465-0320	BRACKET
922.	[1]	149470-0300	TOOTHED GEAR
923.	[1]	149350-1400	O-RING
926.	[4]	149442-0100	BLEEDER SCREW
927.	[4]	149413-0100	UNION NUT

Include in #2:

109341-1030 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num

Bosch num

Firm num

Name

109341-1030
109341-1031

F 01G 29X 061

8973775190 ISUZU

INJECTION-PUMP ASSEMBLY
4JA1 585 K 13CJ INJECTION PUMP ASSY VP44 VP44

Information:

start by: a) remove flywheelb) remove electric starting motorc) remove air compressord) remove turbochargere) remove oil pan 1. Remove the bolts from collar (2) and elbow (1).2. Remove the bolts from support (3). Remove bolts (4) from behind the support.3. Remove the exhaust manifold and support. Remove O-ring seal (5) from between the support and flywheel housing. 4. Fasten tooling (A) and a hoist to the flywheel housing (6). Remove the bolts that hold the flywheel housing in position. Remove the flywheel housing. Weight of the housing is 80 lb. (36 kg).
Do not cause damage to the crankshaft rear seal when the flywheel housing is removed.
Install Flywheel Housing
1. Install a new gasket on the rear of the engine block. 2. Put clean SAE 30 engine oil on the crankshaft rear seal wear sleeve and on the rear seal (2).3. Fasten a hoist and tooling (A) to flywheel housing (1). Put the flywheel housing in position on the engine block.
Be careful not to cause damage to the rear seal.
4. Install the bolts that hold the flywheel housing to the cylinder block. 5. Remove tooling (A). Install O-ring seal (5) on the oil (supply) hole in the flywheel housing and between the support.6. Put exhaust manifold and support (6) in position on the flywheel housing.7. Put 9M3710 Anti-Seize Compound on the bolts that hold the exhaust manifold and support. Install the bolts in the support.8. Install the gaskets between exhaust manifold collar (4) and at the elbow (3). Install the bolts and nuts that hold the manifolds together.end by: a) install oil panb) install turbochargerc) install air compressord) install electric startere) install flywheel