109341-1005 ZEXEL 9 461 629 115 BOSCH INJECTION-PUMP ASSEMBLY 9461629115 1093411005 8972492383

Information injection-pump assembly

BOSCH 9 461 629 115 9461629115

ZEXEL 109341-1005 1093411005

ISUZU 8972492383 8972492383

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 109341-1005 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	109341-1005
1.	_
2.	FUEL INJECTION PUMP	109241-1005
3.	NUMBER PLATE
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105118-8133
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)	19.0{194}/33.5{342}
10.	NOZZLE-HOLDER	105048-2270
11.	NOZZLE	105017-3000

Scheme ###:

3.	[1]	149351-0201	PACKING RING
7.	[1]	149050-0220	SUPPLY PUMP
9.	[1]	149055-0000	SUPPORT RING
10.	[4]	149330-2000	TORX SCREW
12.	[1]	149100-1120	DRIVE SHAFT
17/1.	[1]	149110-0000	SHIM D42.5627.1T2.2
17/1B.	[1]	149110-0100	SHIM D42.5&27.1T2.3
17/1C.	[1]	149110-0200	SHIM D42.5&27.1T2.4
17/1D.	[1]	149110-0300	SHIM D42.5&27.1T2.5
17/1E.	[1]	149110-0400	SHIM D42.5&27.1T2.6
17/1F.	[1]	149110-0500	SHIM D42.5&27.1T2.7
17/1G.	[1]	149110-0600	SHIM D42.5&27.1T2.8
17/1H.	[1]	149110-0700	SHIM D42.5&27.1T2.9
17/1I.	[1]	149110-0800	SHIM D42.5&27.1T3.0
17/1J.	[1]	149110-0900	SHIM D42.5&27.1T3.1
17/1K.	[1]	149110-1000	SHIM D42.5&27.1T3.2
17B/1.	[1]	149110-1200	SHIM D42.5&27.1T2.2
17B/1B.	[1]	149110-1300	SHIM D42.5&27.1T2.3
17B/1C.	[1]	149110-1400	SHIM D42.5&27.1T2.4
17B/1D.	[1]	149110-1500	SHIM D42.5&27.1T2.5
17B/1E.	[1]	149110-1600	SHIM D42.5&27.1T2.6
17B/1F.	[1]	149110-1700	SHIM D42.5&27.1T2.7
17B/1G.	[1]	149110-1800	SHIM D42.5&27.1T2.8
17B/1H.	[1]	149110-1900	SHIM D42.5&27.1T2.9
17B/1I.	[1]	149110-2000	SHIM D42.5&27.1T3.0
17B/1J.	[1]	149110-2100	SHIM D42.5&27.1T3.1
17B/1K.	[1]	149110-2200	SHIM D42.5&27.1T3.2
19.	[1]	149111-0000	DRIVER DISC
20.	[1]	149120-0820	CAM RING
21.	[2]	149112-0200	ROLLER SHOE
22.	[2]	149113-0300	ROLLER
23.	[1]	149111-0100	PLATE
25.	[1]	149114-0000	BEARING PLATE
30.	[1]	149350-3300	O-RING
35.	[1]	149170-0022	HYDRAULIC STOPPER
36.	[1]	149350-3400	O-RING
37.	[1]	149180-0101	CLOSING COVER
38.	[2]	149330-1800	TORX BOLT
39.	[1]	149350-1700	SEAL RING
42.	[1]	149164-0000	COILED SPRING
49.	[4]	149330-1900	TORX BOLT
50.	[1]	149201-0521	HYDRAULIC HEAD
51.	[3]	149350-2000	O-RING
54.	[4]	149313-2700	GASKET
58.	[4]	149300-0023	PRESSURE-CONTROL VALVE
61.	[3]	149330-2300	TORX BOLT
62.	[1]	149436-0000	PLATE
63.	[1]	149350-1900	O-RING
104.	[2]	149330-2400	HEX-SOCKET-HEAD CAP SCREW
105.	[2]	149443-0200	GASKET
107.	[1]	149403-0420	SENSOR
109.	[3]	149330-1600	TORX BOLT
111.	[2]	149330-0501	TORX SCREW
123.	[5]	149330-1700	TORX BOLT
127.	[1]	149350-2800	SEAL RING
133.	[1]	149350-3500	O-RING
134.	[1]	149350-3600	O-RING
135.	[1]	149060-0020	CONTROL VALVE
206.	[1]	149330-2500	UNION NUT
207.	[1]	149412-0000	PLAIN WASHER
243.	[1]	149330-2400	HEX-SOCKET-HEAD CAP SCREW
244.	[1]	149443-0200	GASKET
270.	[1]	149411-2500	COUPLING PLATE
271/1.	[1]	149411-0200	SHIM T0.5
271/1B.	[1]	149411-0300	SHIM T0.6
271/1C.	[1]	149411-0400	SHIM T0.7
271/1D.	[1]	149411-0500	SHIM T0.8
271/1E.	[1]	149411-0600	SHIM T0.9
271/1F.	[1]	149411-0700	SHIM T1.0
271/1G.	[1]	149411-0800	SHIM T1.1
271/1H.	[1]	149411-0900	SHIM T1.2
271/1I.	[1]	149411-1000	SHIM T1.3
271/1J.	[1]	149411-1100	SHIM T1.4
271/1K.	[1]	149411-1200	SHIM T1.5
271B/1.	[1]	149411-2800	SHIM T0.5
271B/1B.	[1]	149411-2900	SHIM T0.6
271B/1C.	[1]	149411-3000	SHIM T0.7
271B/1D.	[1]	149411-3100	SHIM T0.8
271B/1E.	[1]	149411-3200	SHIM T0.9
271B/1F.	[1]	149411-3300	SHIM T1.0
271B/1G.	[1]	149411-3400	SHIM T1.1
271B/1H.	[1]	149411-3500	SHIM T1.2
271B/1I.	[1]	149411-3600	SHIM T1.3
271B/1J.	[1]	149411-3700	SHIM T1.4
271B/1K.	[1]	149411-3800	SHIM T1.5
392.	[1]	149350-3700	O-RING
393.	[1]	149419-0100	BLEEDER SCREW
394.	[1]	149420-0000	INTERMEDIATE PLATE
394B.	[1]	149420-0100	INTERMEDIATE PLATE
400.	[1]	149460-1300	CABLE CRAMP
425.	[2]	149330-2200	TORX BOLT
471.	[1]	149410-0000	COVER
480.	[1]	149350-3800	SEAL RING
800S.	[1]	149480-0020	SERVICE PARTS GROUP
801S.	[1]	149481-0220	PARTS SET
804S.	[1]	149483-0020	PARTS SET
804S/14.	[1]	149350-1800	O-RING
804S/15.	[1]	149350-1900	O-RING
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
805S.	[1]	149482-0220	PARTS SET
902.	[1]	149433-0021	OUTLET PIPE ASSY
902/1.	[1]	149070-0120	OVER FLOW VALVE
902/2.	[1]	149430-0120	INLET UNION
902/3.	[2]	149350-2700	FLAT SEAL RING
903.	[1]	149428-0021	INLET PIPE
903/1.	[1]	149071-0120	EYE BOLT
903/2.	[1]	149425-0920	INLET UNION
903/3.	[2]	149350-2600	FLAT SEAL RING
921.	[1]	149465-0322	BRACKET
922.	[1]	149470-0300	TOOTHED GEAR
923.	[1]	149350-1400	O-RING
926.	[4]	149442-0100	BLEEDER SCREW
927.	[4]	149413-0100	UNION NUT

Include in #2:

109341-1005 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num

Bosch num

Firm num

Name

109341-1005
109341-1006

9 461 629 115

8972492383 ISUZU

INJECTION-PUMP ASSEMBLY
4JA1 585 A K 13CJ INJECTION PUMP ASSY VP44 VP44

Information:

start by:a) remove fuel ratio controlb) remove shut off solenoid 1. Put a mark of identification on the shaft and lever (1) for correct location at assembly. Loosen the bolt and remove lever (1) from the shaft. 2. Remove the bolts, cover (3) and the gasket.3. Remove the bolt, high idle housing (2) and the gasket. 4. Remove the bolt and housing (4) from the governor. 5. Remove bolt (6) from the stop collar.6. Remove stop collar (5) and the spring from the shaft. 7. Remove the plug from the fuel injection pump housing and install tool (A) with square end (flat end) down. Move the governor control to the "FUEL ON" position until the right rack stops against the timing pin. The racks are now in the center (zero) position. 8. Remove bolts (8) that hold the governor housing to the fuel injection pump housing.9. Remove governor housing (7). 10. Disconnect lines (10) and (11) at the governor control plate.11. Remove the bolts, governor control plate (9) and gasket.
Cover the fuel injection pump housing to keep dirt and all foreign material out of the pump housing.
The drive assembly must be removed from the governor control plate before the control plate can be installed. 12. Remove retainer ring (12) from the drive assembly. 13. Remove dowel (14) and drive assembly (13) from the governor control plate.Install Governor (Later)
Make sure there is no dirt or foreign material in the pump housing.
1. Put gasket (2) in position and install governor control plate (1) and the bolts. 2. Put governor drive (3) in position. Make an alignment of the groove (slot) in the bottom end of the governor drive with the notch in the end of the drive pinion assembly.3. Align the marks on the top of drive (3), stop (4) and the gear. 4. Install dowel (5) in the hole in the gear and stop (4). 5. Install retainer ring (6) on the gear. 6. Put the gasket and governor housing (7) in position on the plate. Install the bolts.7. Connect two lines (8) to the plate. 8. Put spring (11) and collar (9) in position on the shaft. Make an alignment of screw (10) and the groove in the shaft. Tighten screw (10).9. Check the fuel rack setting at this time. See FUEL RACK SETTING in TESTING AND ADJUSTING. 10. If nut (13) was loosened it must be tightened at this time. Tighten nut (13) to a torque of 9 3 lb.ft. (12 4 N m).11. Put the gasket and cover (12) in position. Make sure lever (14) is in position under the collar. Install the bolt that holds cover (12) to the housing. 12. Put the gasket and cover (16) in position and install the bolt.13. Install the gasket, plate (15) and the bolts. 14. Make an alignment of the mark on the shaft with mark on lever (17) and install the lever. Tighten the bolt.
If the lever and the shaft are not in correct alignment,