Fuel injectors
  1. Home
  2. injection
  3. #1093411004

109341-1004 ZEXEL F 01G 29X 062 BOSCH INJECTION-PUMP ASSEMBLY f01g29x062 1093411004 8972492382


 

Information injection-pump assembly

BOSCH F 01G 29X 062 f01g29x062
ZEXEL 109341-1004 1093411004
ISUZU 8972492382 8972492382
109341-1004 INJECTION-PUMP ASSEMBLY
Rating:
10
Buy INJECTION-PUMP ASSEMBLY 109341-1004 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 109341-1004
1. _
2. FUEL INJECTION PUMP 109241-1004
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105118-8133
8. Nozzle and Holder
9. Open Pre:MPa(Kqf/cm2) 19.0{194}/33.5{342}
10. NOZZLE-HOLDER 105048-2270
11. NOZZLE 105017-3000

Scheme ###:

PACKING RING
3. [1] 149351-0201 PACKING RING
7. [1] 149050-0220 SUPPLY PUMP
9. [1] 149055-0000 SUPPORT RING
10. [4] 149330-2000 TORX SCREW
12. [1] 149100-1120 DRIVE SHAFT
17/1. [1] 149110-0000 SHIM D42.5627.1T2.2
17/1B. [1] 149110-0100 SHIM D42.5&27.1T2.3
17/1C. [1] 149110-0200 SHIM D42.5&27.1T2.4
17/1D. [1] 149110-0300 SHIM D42.5&27.1T2.5
17/1E. [1] 149110-0400 SHIM D42.5&27.1T2.6
17/1F. [1] 149110-0500 SHIM D42.5&27.1T2.7
17/1G. [1] 149110-0600 SHIM D42.5&27.1T2.8
17/1H. [1] 149110-0700 SHIM D42.5&27.1T2.9
17/1I. [1] 149110-0800 SHIM D42.5&27.1T3.0
17/1J. [1] 149110-0900 SHIM D42.5&27.1T3.1
17/1K. [1] 149110-1000 SHIM D42.5&27.1T3.2
17B/1. [1] 149110-1200 SHIM D42.5&27.1T2.2
17B/1B. [1] 149110-1300 SHIM D42.5&27.1T2.3
17B/1C. [1] 149110-1400 SHIM D42.5&27.1T2.4
17B/1D. [1] 149110-1500 SHIM D42.5&27.1T2.5
17B/1E. [1] 149110-1600 SHIM D42.5&27.1T2.6
17B/1F. [1] 149110-1700 SHIM D42.5&27.1T2.7
17B/1G. [1] 149110-1800 SHIM D42.5&27.1T2.8
17B/1H. [1] 149110-1900 SHIM D42.5&27.1T2.9
17B/1I. [1] 149110-2000 SHIM D42.5&27.1T3.0
17B/1J. [1] 149110-2100 SHIM D42.5&27.1T3.1
17B/1K. [1] 149110-2200 SHIM D42.5&27.1T3.2
19. [1] 149111-0000 DRIVER DISC
20. [1] 149120-0820 CAM RING
21. [2] 149112-0200 ROLLER SHOE
22. [2] 149113-0300 ROLLER
23. [1] 149111-0100 PLATE
25. [1] 149114-0000 BEARING PLATE
30. [1] 149350-3300 O-RING
35. [1] 149170-0022 HYDRAULIC STOPPER
36. [1] 149350-3400 O-RING
37. [1] 149180-0101 CLOSING COVER
38. [2] 149330-1800 TORX BOLT
39. [1] 149350-1700 SEAL RING
42. [1] 149164-0000 COILED SPRING
49. [4] 149330-1900 TORX BOLT
50. [1] 149201-0521 HYDRAULIC HEAD
51. [3] 149350-2000 O-RING
54. [4] 149313-2700 GASKET
58. [4] 149300-0023 PRESSURE-CONTROL VALVE
61. [3] 149330-2300 TORX BOLT
62. [1] 149436-0000 PLATE
63. [1] 149350-1900 O-RING
104. [2] 149330-2400 HEX-SOCKET-HEAD CAP SCREW
105. [2] 149443-0200 GASKET
107. [1] 149403-0420 SENSOR
109. [3] 149330-1600 TORX BOLT
111. [2] 149330-0501 TORX SCREW
123. [5] 149330-1700 TORX BOLT
127. [1] 149350-2800 SEAL RING
133. [1] 149350-3500 O-RING
134. [1] 149350-3600 O-RING
135. [1] 149060-0020 CONTROL VALVE
206. [1] 149330-2500 UNION NUT
207. [1] 149412-0000 PLAIN WASHER
243. [1] 149330-2400 HEX-SOCKET-HEAD CAP SCREW
244. [1] 149443-0200 GASKET
270. [1] 149411-2500 COUPLING PLATE
271/1. [1] 149411-0200 SHIM T0.5
271/1B. [1] 149411-0300 SHIM T0.6
271/1C. [1] 149411-0400 SHIM T0.7
271/1D. [1] 149411-0500 SHIM T0.8
271/1E. [1] 149411-0600 SHIM T0.9
271/1F. [1] 149411-0700 SHIM T1.0
271/1G. [1] 149411-0800 SHIM T1.1
271/1H. [1] 149411-0900 SHIM T1.2
271/1I. [1] 149411-1000 SHIM T1.3
271/1J. [1] 149411-1100 SHIM T1.4
271/1K. [1] 149411-1200 SHIM T1.5
271B/1. [1] 149411-2800 SHIM T0.5
271B/1B. [1] 149411-2900 SHIM T0.6
271B/1C. [1] 149411-3000 SHIM T0.7
271B/1D. [1] 149411-3100 SHIM T0.8
271B/1E. [1] 149411-3200 SHIM T0.9
271B/1F. [1] 149411-3300 SHIM T1.0
271B/1G. [1] 149411-3400 SHIM T1.1
271B/1H. [1] 149411-3500 SHIM T1.2
271B/1I. [1] 149411-3600 SHIM T1.3
271B/1J. [1] 149411-3700 SHIM T1.4
271B/1K. [1] 149411-3800 SHIM T1.5
392. [1] 149350-3700 O-RING
393. [1] 149419-0100 BLEEDER SCREW
394. [1] 149420-0000 INTERMEDIATE PLATE
394B. [1] 149420-0001 INTERMEDIATE PLATE
400. [1] 149460-1300 CABLE CRAMP
425. [2] 149330-2200 TORX BOLT
471. [1] 149410-0000 COVER
480. [1] 149350-3800 SEAL RING
800S. [1] 149480-0020 SERVICE PARTS GROUP
801S. [1] 149481-0220 PARTS SET
804S. [1] 149483-0020 PARTS SET
804S/14. [1] 149350-1800 O-RING
804S/15. [1] 149350-1900 O-RING
805S. [1] 149482-0220 PARTS SET
805S. [1] 149482-0220 PARTS SET
805S. [1] 149482-0220 PARTS SET
805S. [1] 149482-0220 PARTS SET
805S. [1] 149482-0220 PARTS SET
805S. [1] 149482-0220 PARTS SET
805S. [1] 149482-0220 PARTS SET
805S. [1] 149482-0220 PARTS SET
902. [1] 149433-0021 OUTLET PIPE ASSY
902/1. [1] 149070-0120 OVER FLOW VALVE
902/2. [1] 149430-0120 INLET UNION
902/3. [2] 149350-2700 FLAT SEAL RING
903. [1] 149428-0021 INLET PIPE
903/1. [1] 149071-0120 EYE BOLT
903/2. [1] 149425-0920 INLET UNION
903/3. [2] 149350-2600 FLAT SEAL RING
921. [1] 149465-0320 BRACKET
922. [1] 149470-0300 TOOTHED GEAR
923. [1] 149350-1400 O-RING
926. [4] 149442-0100 BLEEDER SCREW
927. [4] 149413-0100 UNION NUT

Include in #2:

109341-1004 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
109341-1004 
109341-1005 
F 01G 29X 062 
8972492382  ISUZU
INJECTION-PUMP ASSEMBLY
4JA1 585 * K 13CJ INJECTION PUMP ASSY VP44 VP44




Information:

start by:a) remove fuel ratio control 1. Remove bolt (4). Remove lever (5) and the rod from the governor.2. Remove lockwire (2). Remove bolts (1) and cover (3) from the governor housing. Check the condition of the gasket under the cover. If the gasket has damage, use a new part for replacement. 3. Remove the bolt from stop collar (6). Remove stop collar (6). Remove the collar and spring from below collar (6). 4. Install tool (A) in the fuel injection pump housing. Make sure the correct end of tool (A) is used. Tool (A) is in position when it is against the shoulder of the groove in the rack. The racks are now in the center (zero) position.5. Remove bolts (8) and governor housing (7). 6. Disconnect fuel lines (11) from the governor plate.7. Remove bolts (10) and governor plate (9). Check the condition of the gasket under the plate. If the gasket has damage, use a new part for replacement. It is possible to remove the governor and governor plate as a unit. The above steps must be followed before the governor can be installed again on the injection pump housing.Install Governor (Earlier)
The driver assembly must be removed from the governor plate before the governor plate is installed in the injection pump housing.
1. Install a new gasket on the injection pump housing. 2. Put governor plate (1) in position on the fuel pump housing. Make sure the dowels in governor plate (1) are in alignment with the holes in the injection pump housing. The racks must be held against the rack stop pin and the governor lever engaged in the groove (slot) in the left hand rack. 3. Install stop (3) in gear (4). Make sure the wide space in stop (3) is in alignment with the wide space on the drive pinion assembly.4. Install drive gear assembly (2). 5. Make an alignment of the holes in gear (4), the stop and drive assembly. Install the pin and ring (5) that hold the unit together. 6. Install the gasket and governor housing (8) on the governor plate.7. Install the spring, collar and stop collar (7). Install the bolt in the collar to hold it.8. Check the governor adjustment. See GOVERNOR ADJUSTMENTS in TESTING AND ADJUSTING.9. Install the gasket and cover (6) on the governor housing. Make sure the dowel in the cover is in alignment with the notch in collar (7). Install the bolts that hold the cover in position. Install a new lockwire.10. Connect the fuel lines to the governor plate.11. Install the lever for the governor control.12. Remove tool (A) from the injection pump housing.end by:a) install fuel ratio control

Have questions with 109341-1004?





Group cross 109341-1004 ZEXEL

109341-1000  
 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

109341-1001  

109341-1002 
 
8972492380 
INJECTION-PUMP ASSEMBLY
4JA1 585
109341-1002  

109341-1006 
 
 
INJECTION-PUMP ASSEMBLY
4JA1 585
109341-1003  

109341-1004 
 
8972492381 
INJECTION-PUMP ASSEMBLY
4JA1 585
109341-1004  

109341-1005 
F 01G 29X 062 
8972492382 
INJECTION-PUMP ASSEMBLY
4JA1 585
109341-1005  

109341-1006 
9 461 629 115 
8972492383 
INJECTION-PUMP ASSEMBLY
4JA1 585
109341-1006  
0 470 504 030 
8972492384 
INJECTION-PUMP ASSEMBLY
4JA1 585
Back to top