Information injection-pump assembly
BOSCH
F 019 Z1D 017
f019z1d017
ZEXEL
109165-3013
1091653013

Rating:
Components :
0. | INJECTION-PUMP ASSEMBLY | 109165-3013 |
1. | _ | |
2. | FUEL INJECTION PUMP | 109065-3012 |
3. | NUMBER PLATE | |
4. | _ | |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | |
7. | NOZZLE AND HOLDER ASSY | 105110-7821 |
8. | Nozzle and Holder | |
9. | Open Pre:MPa(Kqf/cm2) | 15.7{160}/21.6{220} |
10. | NOZZLE-HOLDER | 105041-2120 |
11. | NOZZLE | 105019-2290 |
Scheme ###:
1. | [0] | 149501-0121 | |
2. | [1] | 149520-0120 | BLEEDER SCREW |
3. | [1] | 149420-0001 | INTERMEDIATE PLATE |
5. | [1] | 149555-0000 | COVER |
6. | [1] | 149550-0120 | SUPPLY PUMP |
7. | [1] | 149911-0000 | O-RING |
8. | [1] | 149556-0000 | COVER |
9. | [1] | 149912-0200 | SEAL RING |
10. | [3] | 149916-0300 | TORX SCREW |
11. | [1] | 149916-0400 | TORX SCREW |
15. | [1] | 149600-0100 | DRIVE SHAFT |
16. | [1] | 149601-0000 | KEY |
17. | [1] | 149602-0000 | PLAIN WASHER |
17B. | [1] | 149602-0100 | PLAIN WASHER |
17C. | [1] | 149602-0200 | PLAIN WASHER |
17D. | [1] | 149602-0300 | PLAIN WASHER |
17E. | [1] | 149602-0400 | PLAIN WASHER |
17F. | [1] | 149602-0500 | PLAIN WASHER |
17G. | [1] | 149602-0600 | PLAIN WASHER |
17H. | [1] | 149602-0700 | PLAIN WASHER |
17I. | [1] | 149602-0800 | PLAIN WASHER |
17J. | [1] | 149602-0900 | PLAIN WASHER |
17K. | [1] | 149602-1000 | PLAIN WASHER |
18. | [1] | 149604-0000 | LOCKING WASHER |
20. | [1] | 149605-0000 | BEARING PLATE |
22. | [1] | 149606-0000 | COILED SPRING |
25. | [1] | 149611-0000 | CAM RING |
26. | [1] | 149615-1301 | PLATE |
26B. | [1] | 149615-1401 | PLATE |
26C. | [1] | 149615-1501 | PLATE |
26D. | [1] | 149615-1601 | PLATE |
26E. | [1] | 149615-1701 | PLATE |
26F. | [1] | 149615-1801 | PLATE |
26G. | [1] | 149615-1901 | PLATE |
26H. | [1] | 149615-2001 | PLATE |
26I. | [1] | 149615-2101 | PLATE |
26J. | [1] | 149615-2201 | PLATE |
26K. | [1] | 149615-2301 | PLATE |
26L. | [1] | 149615-2401 | PLATE |
26M. | [1] | 149615-2501 | PLATE |
27. | [2] | 149915-0000 | TORX BOLT |
30. | [0] | 149650-0900 | |
31. | [1] | 149651-0000 | SLIDING PIECE |
32. | [1] | 149653-0300 | SHIM |
33. | [1] | 149652-0100 | COILED SPRING |
34. | [1] | 149653-0600 | SHIM |
35. | [2] | 149911-0100 | O-RING |
35. | [2] | 149911-0100 | O-RING |
36. | [1] | 149670-0000 | PLATE |
37. | [1] | 479765-6220 | TIMER PISTON SENSOR |
38. | [2] | 149917-1300 | BLEEDER SCREW |
40. | [1] | 149911-0200 | O-RING |
41. | [1] | 149911-0300 | O-RING |
42. | [1] | 149660-1120 | COVER |
43. | [4] | 149915-0600 | TORX BOLT |
45. | [2] | 149620-0000 | ROLLER |
46. | [2] | 149621-0000 | SHOE |
50. | [1] | 149703-0220 | HYDRAULIC HEAD |
50. | [1] | 149703-0220 | HYDRAULIC HEAD |
50. | [1] | 149703-0220 | HYDRAULIC HEAD |
50. | [1] | 149703-0220 | HYDRAULIC HEAD |
50. | [1] | 149703-0220 | HYDRAULIC HEAD |
51. | [2] | 146600-0000 | O-RING |
53. | [1] | 149720-0000 | SHIM |
53B. | [1] | 149720-0100 | SHIM |
53C. | [1] | 149720-0200 | SHIM |
53D. | [1] | 149720-0300 | SHIM |
54. | [1] | 016020-1410 | LOCKING WASHER |
55. | [6] | 146433-0100 | GASKET D12&6.4T1.00 |
56. | [6] | 149300-0221 | PRESSURE-CONTROL VALVE |
60. | [4] | 149915-0100 | TORX BOLT |
61. | [1] | 149722-0000 | CAPSULE |
62. | [1] | 146600-0500 | O-RING |
65. | [1] | 149806-0221 | GOVERNOR;ELECTRIC |
66. | [6] | 149915-0900 | TORX BOLT |
80. | [1] | 106144-1092 | TIMING CONTROL VALVE |
80/8. | [1] | 161440-3700 | O-RING |
81. | [1] | 149911-0400 | O-RING |
82. | [2] | 149913-0100 | BACKUP RING |
83. | [2] | 149915-0300 | TORX BOLT |
100. | [1] | 149571-0200 | EYE BOLT |
101. | [2] | 139512-0500 | GASKET |
102. | [1] | 149920-0220 | INLET UNION |
110. | [1] | 149570-0220 | OVER FLOW VALVE |
111. | [2] | 139512-0500 | GASKET |
112. | [1] | 149920-1220 | INLET UNION |
120. | [1] | 149570-0320 | OVER FLOW VALVE |
121. | [2] | 139512-0500 | GASKET |
122. | [1] | 149920-0721 | INLET UNION |
130. | [1] | 149560-0120 | CONTROL VALVE |
150. | [1] | 149900-0420 | PULLING ELECTROMAGNET |
150/9. | [1] | 149912-0500 | SEAL RING |
151. | [1] | 149575-0001 | FILTER |
152. | [1] | 149912-0500 | SEAL RING |
153. | [1] | 146621-1000 | UNION NUT |
160. | [1] | 479778-4320 | EEPROM ASSY |
161. | [4] | 149915-0500 | TORX BOLT |
205. | [1] | 149935-0000 | WOODRUFF KEY |
240. | [1] | 149940-0900 | BRACKET |
241. | [2] | 149915-0400 | TORX BOLT |
242. | [1] | 139006-5700 | BLEEDER SCREW |
800S. | [1] | 149501-0220 | PUMP HOUSING |
810S. | [1] | 149960-0020 | REPAIR SET |
856S. | [1] | 148851-4410 | CONNECTOR |
878S. | [1] | 149912-0800 | SEAL RING |
905. | [1] | 149950-3400 | NAMEPLATE |
910. | [1] | 149930-0520 | BRACKET |
911. | [1] | 149911-0600 | O-RING OEM:MF520407 |
912. | [4] | 139310-0000 | PLAIN WASHER |
913. | [4] | 014111-0440 | LOCKING WASHER |
914. | [4] | 013121-0040 | UNION NUT M10P1.25H8 |
920. | [1] | 149932-0100 | COUPLING PLATE |
921. | [1] | 156809-0000 | LOCKING WASHER |
922. | [1] | 013121-8140 | UNION NUT M18P1.5H15 |
935. | [1] | 149925-0320 | BRACKET |
936. | [2] | 149915-0700 | TORX BOLT |
937. | [2] | 149926-0200 | SPACER BUSHING |
948. | [1] | 149921-0000 | HOSE OEM:MS603005 |
949. | [2] | 149922-0000 | HOSE CLIP OEM:MS660164 |
949. | [2] | 149922-0000 | HOSE CLIP OEM:MS660164 |
955. | [1] | 479771-5920 | PULSE GENERATOR |
955/2. | [1] | 016520-1510 | O-RING |
960. | [1] | 149940-1000 | CLAMPING BAND |
961. | [1] | 149915-0400 | TORX BOLT |
965. | [3] | 148650-0000 | BINDER |
966. | [1] | 148650-1300 | TUBE |
968. | [1] | 148650-1400 | TAPE 230MM |
Include in #2:
109165-3013
as INJECTION-PUMP ASSEMBLY
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
Termination Date
March 31, 1997Problem
Improvements have been made to the remanufactured unit injectors that are used in various 3114 and 3116 Engines. All of the former 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, and 0R4376 Remanufactured Unit Injectors need to be removed from Parts Stock.
Action Required
Remove all 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, and 0R4376 Remanufactured Unit Injectors from Parts Stock.
When ordering parts, refer to the attached chart until the information is available in a permanent publication.
Service Claim Allowances
Submit one claim for all 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, and 0R4376 Remanufactured Unit Injectors removed from Parts Stock.
TEPS Dealers should refer to their warranty bullitin for proper claiming and disposition.
Parts Disposition
All injectors removed from Parts Stock are to be returned as cores for remanufacturing.
U.S. and Canadian Dealers
Return all 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, and 0R4376 Remanufactured Unit Injectors that are removed from Parts Stock and a copy of the claim to:
Caterpillar Inc.
Attn: Bill Harland - Warranty Review
501 Cardinal Drive
Corinth, MS 38834
All Other Dealers
Handle the parts in accordance with your Warranty Bulletin on Remanufactured Engines and Components, refer to the topic "Disposition of the Core Under Warranty".
Attach.(1-UNIT INJECTOR CHART)3114 & 3116 Unit Injector Chart
Termination Date
March 31, 1997Problem
Improvements have been made to the remanufactured unit injectors that are used in various 3114 and 3116 Engines. All of the former 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, and 0R4376 Remanufactured Unit Injectors need to be removed from Parts Stock.
Action Required
Remove all 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, and 0R4376 Remanufactured Unit Injectors from Parts Stock.
When ordering parts, refer to the attached chart until the information is available in a permanent publication.
Service Claim Allowances
Submit one claim for all 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, and 0R4376 Remanufactured Unit Injectors removed from Parts Stock.
TEPS Dealers should refer to their warranty bullitin for proper claiming and disposition.
Parts Disposition
All injectors removed from Parts Stock are to be returned as cores for remanufacturing.
U.S. and Canadian Dealers
Return all 0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, and 0R4376 Remanufactured Unit Injectors that are removed from Parts Stock and a copy of the claim to:
Caterpillar Inc.
Attn: Bill Harland - Warranty Review
501 Cardinal Drive
Corinth, MS 38834
All Other Dealers
Handle the parts in accordance with your Warranty Bulletin on Remanufactured Engines and Components, refer to the topic "Disposition of the Core Under Warranty".
Attach.(1-UNIT INJECTOR CHART)3114 & 3116 Unit Injector Chart