109145-3040 ZEXEL F 019 Z1D 038 BOSCH INJECTION-PUMP ASSEMBLY f019z1d038 1091453040 me220637


 

Information injection-pump assembly

BOSCH F 019 Z1D 038 f019z1d038
ZEXEL 109145-3040 1091453040
MITSUBISHI ME220637 me220637
109145-3040 INJECTION-PUMP ASSEMBLY
Rating:
25
Buy INJECTION-PUMP ASSEMBLY 109145-3040 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 109145-3040
1. _
2. FUEL INJECTION PUMP 109045-3040
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105118-7821
8. Nozzle and Holder
9. Open Pre:MPa(Kqf/cm2) 15.7{160}/21.6{220}
10. NOZZLE-HOLDER 105048-4310
11. NOZZLE 105019-1230

Scheme ###:

1. [0] 149500-0320
2. [1] 149520-0120 BLEEDER SCREW
3. [1] 149420-0001 INTERMEDIATE PLATE
5. [1] 149555-0000 COVER
6. [1] 149550-0020 SUPPLY PUMP
7. [1] 149911-0000 O-RING
8. [1] 149556-0000 COVER
9. [1] 149912-0200 SEAL RING
10. [3] 149916-0300 TORX SCREW
11. [1] 149916-0400 TORX SCREW
15. [1] 149600-0000 DRIVE SHAFT
16. [1] 149601-0000 KEY
17. [1] 149602-0000 PLAIN WASHER
17B. [1] 149602-0100 PLAIN WASHER
17C. [1] 149602-0200 PLAIN WASHER
17D. [1] 149602-0300 PLAIN WASHER
17E. [1] 149602-0400 PLAIN WASHER
17F. [1] 149602-0500 PLAIN WASHER
17G. [1] 149602-0600 PLAIN WASHER
17H. [1] 149602-0700 PLAIN WASHER
17I. [1] 149602-0800 PLAIN WASHER
17J. [1] 149602-0900 PLAIN WASHER
17K. [1] 149602-1000 PLAIN WASHER
18. [1] 149604-0000 LOCKING WASHER
20. [1] 149605-0000 BEARING PLATE
22. [1] 149606-0000 COILED SPRING
25. [1] 149610-0100 CAM RING
26. [1] 149615-0001 PLATE
26B. [1] 149615-0101 PLATE
26C. [1] 149615-0201 PLATE
26D. [1] 149615-0301 PLATE
26E. [1] 149615-0401 PLATE
26F. [1] 149615-0501 PLATE
26G. [1] 149615-0601 PLATE
26H. [1] 149615-0701 PLATE
26I. [1] 149615-0801 PLATE
26J. [1] 149615-0901 PLATE
26K. [1] 149615-1001 PLATE
26L. [1] 149615-1101 PLATE
26M. [1] 149615-1201 PLATE
27. [2] 149915-0000 TORX BOLT
31. [1] 149651-0000 SLIDING PIECE
32. [1] 149653-0300 SHIM
33. [1] 149652-0000 COILED SPRING
34. [1] 149653-0500 SHIM
35. [2] 149911-0100 O-RING
35. [2] 149911-0100 O-RING
36. [1] 149670-0001 PLATE
37. [1] 479765-8220 TIMER PISTON SENSOR
38. [2] 149917-1300 BLEEDER SCREW
40. [1] 149911-0200 O-RING
41. [1] 149911-0300 O-RING
42. [1] 149660-1020 COVER
43. [4] 149915-0600 TORX BOLT
45. [2] 149620-0000 ROLLER
46. [2] 149621-0000 SHOE
50. [1] 149701-0420 HYDRAULIC HEAD
50. [1] 149701-0420 HYDRAULIC HEAD
50. [1] 149701-0420 HYDRAULIC HEAD
50. [1] 149701-0420 HYDRAULIC HEAD
50. [1] 149701-0420 HYDRAULIC HEAD
51. [2] 146600-0000 O-RING
53. [1] 149720-0000 SHIM
53B. [1] 149720-0100 SHIM
53C. [1] 149720-0200 SHIM
53D. [1] 149720-0300 SHIM
54. [1] 016020-1410 LOCKING WASHER
55. [4] 146433-0100 GASKET D12&6.4T1.00
56. [4] 149300-0321 PRESSURE-CONTROL VALVE
60. [4] 149915-0100 TORX BOLT
61. [1] 149722-0020 CAPSULE
61/2. [1] 146600-0500 O-RING
65. [1] 149805-0720 GOVERNOR;ELECTRIC
66. [6] 149915-0900 TORX BOLT
80. [1] 106144-1120 TIMING CONTROL VALVE
80/7. [1] 161440-3800 O-RING
80/8. [1] 161440-3700 O-RING
82. [1] 149913-0100 BACKUP RING
83. [2] 149915-0300 TORX BOLT
100. [1] 149571-0200 EYE BOLT
101. [2] 139512-0500 GASKET
110. [1] 149570-0521 OVER FLOW VALVE
111. [2] 139512-0500 GASKET
120. [1] 149570-0320 OVER FLOW VALVE
121. [2] 139512-0500 GASKET
122. [1] 149920-1820 INLET UNION
130. [1] 149560-0120 CONTROL VALVE
150. [1] 149900-0420 PULLING ELECTROMAGNET
150/9. [1] 149912-0500 SEAL RING
151. [1] 149575-0001 FILTER
153. [1] 146621-1000 UNION NUT
161. [4] 149915-0500 TORX BOLT
205. [1] 149935-0000 WOODRUFF KEY
250. [1] 146659-9300 CLAMPING BAND
251. [1] 149915-0400 TORX BOLT
252. [1] 146659-9400 CLAMPING BAND
253. [1] 149915-0400 TORX BOLT
256. [2] 148650-2300 TUBE
259. [1] 148650-1400 TAPE 100MM
800S. [1] 149500-0420 PUMP HOUSING
810S. [1] 149960-0020 REPAIR SET
856S. [1] 148851-4410 CONNECTOR
878S. [1] 149912-0800 SEAL RING
905. [1] 149950-5100 NAMEPLATE
910. [1] 149930-0820 BRACKET
911. [1] 149911-0600 O-RING OEM:MF520407
912. [3] 149919-0000 PLAIN WASHER OEM:MF450006
914. [3] 149918-0000 UNION NUT OEM:MF434105
920. [1] 149931-0021 TOOTHED GEAR OEM:ME215054
922. [1] 149918-0100 UNION NUT
923. [1] 149931-0301 PLATE OEM:215053
924. [1] 149931-0201 PLATE OEM:ME215050
925. [3] 149917-0700 BLEEDER SCREW OEM:MF140005
930. [1] 149925-0100 BRACKET OEM:ME212074
931. [2] 149917-1000 BLEEDER SCREW OEM:MF140227
932. [2] 149926-0100 SPACER BUSHING OEM:ME212075
942. [1] 149920-1320 INLET UNION OEM:MH038134
948. [1] 149921-0000 HOSE OEM:MS603005
949. [2] 149922-0000 HOSE CLIP OEM:MS660164
949. [2] 149922-0000 HOSE CLIP OEM:MS660164
955. [2] 149945-0020 PULSE GENERATOR OEM:ME212060
956. [2] 149917-0700 BLEEDER SCREW OEM:MF140005
960. [1] 149940-1100 CLAMPING BAND
961. [1] 149917-0600 BLEEDER SCREW OEM:MH000999

Include in #2:

109145-3040 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
109145-3040 
F 019 Z1D 038 
ME220637  MITSUBISHI
INJECTION-PUMP ASSEMBLY
4D33 K




Information:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
This Program must be administered as soon as possible. When reporting the repair, use "PI3781" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code. Exception: If the repair is done after failure, use "PI3781" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
This Revised Service Letter replaces the June 21, 1995 Service Letter. Changes have been made to the Parts Needed.
Completion Date
December 31, 1995Termination Date
June 30, 1996Problem
The fuel injector tip may fail on certain 3406E Truck Engines.
Affected Product
Model & Identification Number
3406E (5EK371, 5EK378-380, 5EK382, 5EK403, 5EK405, 5EK435, 5EK453, 5EK455, 5EK461, 5EK485, 5EK486, 5EK500-502, 5EK509, 5EK510, 5EK515, 5EK516, 5EK518, 5EK527, 5EK538, 5EK544, 5EK555, 5EK570, 5EK593, 5EK602, 5EK609, 5EK619, 5EK634, 5EK639, 5EK642, 5EK649, 5EK658, 5EK660, 5EK664, 5EK670-672, 5EK674, 5EK676, 5EK677, 5EK685, 5EK686, 5EK691, 5EK698, 5EK710, 5EK714, 5EK726, 5EK731, 5EK732, 5EK734, 5EK743-746, 5EK750, 5EK752, 5EK756, 5EK767-770, 5EK772, 5EK777-874, 5EK876-878, 5EK880-883, 5EK885-905, 5EK907, 5EK908, 5EK912-919, 5EK921, 5EK931, 5EK933-1025, 5EK1028-1061, 5EK1064-1070, 5EK1072, 5EK1074-1098, 5EK1101-1118, 5EK1122-1140, 5EK1144-1155, 5EK1158-1190, 5EK1195-1208, 5EK1212-1220, 5EK1222-1252, 5EK1254-1297, 5EK1299, 5EK1300, 5EK1302, 5EK1303, 5EK1305, 5EK1307-1310, 5EK1313, 5EK1319, 5EK1322, 5EK1324, 5EK1326, 5EK1327, 5EK1329-1334, 5EK1336, 5EK1337, 5EK1340, 5EK1341, 5EK1343, 5EK1344, 5EK1346, 5EK1348-1372, 5EK1374-1379, 5EK1381-1384, 5EK1390-1425, 5EK1427-1433, 5EK1435-1451, 5EK1454-1459, 5EK1461, 5EK1463, 5EK1465, 5EK1468-1485, 5EK1489-1491, 5EK1493, 5EK1494, 5EK1496, 5EK1512-1517, 5EK1520-1522, 5EK1530, 5EK1531, 5EK1533, 5EK1539-1541, 5EK1543, 5EK1545-1562, 5EK1567, 5EK1569-1628, 5EK1630-1662, 5EK1664, 5EK1668-1680, 5EK1682-1693, 5EK1699-1716, 5EK1718-1746, 5EK1750, 5EK1753, 5EK1755-1811)
Parts Needed
Dealers will need to order parts for this Program.
6 - 0R4893 Injector Group (reman part number for 1171148) (used on 435 HP ratings 5EK371-1184, except 5EK988, 989, 1003, 1004, 1011, 1036, 1076)or6 - 0R4894 Injector Group (reman part number for 1188010) (used on 355, 375 and 435 HP ratings 5EK1185-1811, includes 5EK988, 989, 1003, 1004, 1011, 1036, 1076)or6 - 0R4895 Injector Group (reman part number for 1187929) (used on 410 HP ratings)Action Required
See attached rework procedure.
Service Claim Allowances
Cab Types
SC = Ford LN, L, LS, LA, Short ConventionalMC = Medium Hood ConventionalCV = Long Hood ConventionalCO = Cab OverParts Disposition
U.S. and Canadian Dealers
Return all fuel injectors that are removed from engines along with a copy of the claim and the Core Credit Request form (CCR) to:
Caterpillar Inc.
Attn: Jack Hoobler/PI3781
Service Claims Room
8201 N. University
Peoria, IL 61615
All Other Dealers
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
1. Remove the necessary air piping, air cleaners, valve covers, Jake Brakes, and rocker arm assemblies.2. Before removing fuel injectors from engine, be sure to drain fuel from fuel system.The recommended procedure is to blow compressed air through system via the fuel filter air bleed cap.Remove the fuel injectors from the engine.Immediately clean off excess engine oil and place the fuel injectors in individual clean plastic bags.Use care to prevent dirt from entering the

Have questions with 109145-3040?





Group cross 109145-3040 ZEXEL

Mitsubishi 

 
 
INJECTION-PUMP ASSEMBLY
4D33
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z1D 041 
ME215086 
INJECTION-PUMP ASSEMBLY
4D33
F 019 Z1D 040 
 
INJECTION-PUMP ASSEMBLY
4D33
F 019 Z1D 015 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z1D 036 
ME215105 
INJECTION-PUMP ASSEMBLY
4D33
 
 
INJECTION-PUMP ASSEMBLY
F 019 Z1D 054 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z1D 060 
ME215107 
INJECTION-PUMP ASSEMBLY
4D33
F 019 Z1D 061 
 
INJECTION-PUMP ASSEMBLY
4D33
F 019 Z1D 016 
 
INJECTION-PUMP ASSEMBLY
F 019 Z1D 055 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z1D 008 
ME220082 
INJECTION-PUMP ASSEMBLY
4D33
F 019 Z1D 037 
ME220957 
INJECTION-PUMP ASSEMBLY
4D33
109145-3040  
F 019 Z1D 038 
ME220637 
INJECTION-PUMP ASSEMBLY
4D33
F 019 Z1D 062 
 
INJECTION-PUMP ASSEMBLY
F 019 Z1D 027 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z1D 028 
ME220958 
INJECTION-PUMP ASSEMBLY
4D33
Back to top