108622-1214 ZEXEL F 019 Z10 784 BOSCH INJECTION-PUMP ASSEMBLY f019z10784 1086221214 1156033665

Information injection-pump assembly

BOSCH F 019 Z10 784 f019z10784

ZEXEL 108622-1214 1086221214

ISUZU 1156033665 1156033665

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 108622-1214 zexel genuine, new aftermarket engine parts with delivery

Service parts 108622-1214 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 108062-3681

3. GOVERNOR 105923-4741

4. SUPPLY PUMP 105237-5500

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE 105664-2261

7. COUPLING PLATE

8. _ 159601-8520

9. _ 156640-3820

10. NOZZLE AND HOLDER ASSY 105110-7731

11. Nozzle and Holder 1-15300-369-0

12. Open Pre:MPa(Kqf/cm2) 17.7(180)/22.1(225)

13. NOZZLE-HOLDER 105041-4161

14. NOZZLE

15. NOZZLE SET 105019-2180

Include in #1:

108622-1214 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num

Bosch num

Firm num

Name

108622-1214

F 019 Z10 784

1156033665 ISUZU

INJECTION-PUMP ASSEMBLY
6SD1-TC K 14CJ INJECTION PUMP ASSY TICS HD-TI6M TICS

Information:

Operations that may cause product damage are identified by notice labels in this publication.
Introduction
This Tool Operating Manual contains two filter installation procedures. This first procedure is for installing a primary filter system. This is a coarse filter and will protect the transfer pump from contamination in the oil. The second procedure outlines installing a secondary filter which is designed to protect injection pumps from contaminated oil. Fuel injection pumps used on the 3208 Engine are one example of a fuel injection pump that requires the secondary filter installation.It will be the dealer choice as to which optional filter is installed on the test stand. Determine what type of filtering will be required most often, and install the appropriate type of filtering system. These filters can only be added to the 15 horsepower test stands.Secondary Filter
Nomenclature
Illustration 1. Nomenclature for Secondary Filter Installation. Refer to Chart A for item identification. Fabricated Parts
All the parts required for this installation can be ordered from Caterpillar Parts Distribution, except bracket (1). This must be manufactured by the bench owner, using the dimensions provided below.This bracket can be made from common SAE1018 steel. Weld the two pieces together.
Illustration 2. Filter Mounting Bracket. Refer to Chart B for dimensions. Installation
Assemble the Fuel Filter
1. Install 053-0088 Fitting (17) with 3J-1907 Seal (18) into the inlet port (left side) of the filter base. (This converts a number 6 STOP port to NPT). Install 5P-4455 Fitting (19) into fitting (17).2. Install 2R-6806 Fitting (15) with 3J-1907 Seal (16) into the outlet port (right side) of the filter base.3. Install 6N-4414 Cover (7) onto the filter base using 1P-0436 Gasket (8), 4B-3388/6V-2317 (9), and OS-1616/6V-8490 Bolt (10).4. Install 9S-4182 Plug (5) with 6V-5084 O-ring Seal (6) into the top of the filter base.5. Install the filter base assembly onto filter bracket (1),