107692-1801 ZEXEL 9 400 613 192 BOSCH INJECTION-PUMP ASSEMBLY 9400613192 1076921801 8976024191


 

Information injection-pump assembly

BOSCH 9 400 613 192 9400613192
ZEXEL 107692-1801 1076921801
ISUZU 8976024191 8976024191
107692-1801 INJECTION-PUMP ASSEMBLY
Rating:
36
Buy INJECTION-PUMP ASSEMBLY 107692-1801 zexel genuine, new aftermarket engine parts with delivery

Service parts 107692-1801 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 107069-0710
3. GOVERNOR 105933-1681
4. SUPPLY PUMP 105237-6111
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105662-1650
7. COUPLING PLATE
10. NOZZLE AND HOLDER ASSY 105110-7753
11. Nozzle and Holder 8-94390-795-4
12. Open Pre:MPa(Kqf/cm2) 18.1{185}/22.1{225}
13. NOZZLE-HOLDER 105041-2131
14. NOZZLE
15. NOZZLE SET 105019-2200

Include in #1:

107692-1801 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
107692-1801 
9 400 613 192 
8976024191  ISUZU
INJECTION-PUMP ASSEMBLY
6HH1 K 14CG INJECTION PUMP ASSY TICS MD-TI6 TICS




Information:

Oils
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.Keep all exhaust manifold and turbocharger shields in place to protect hot exhaust from oil spray in the event of a line, tube or seal failure.Batteries
Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes.Wash hands after touching batteries and connectors. Use of gloves is recommended.Batteries give off flammable fumes which can explode. Ensure there is proper ventilation for batteries which are located in an enclosure.Always thaw a frozen battery before jump starting. Frozen batteries can explode.Do not smoke when observing the battery electrolyte levels.Always wear protective glasses when working with batteries.Never disconnect any charging unit circuit or battery circuit cable from the battery when charging unit is operating. A spark can cause the flammable vapor mixture of hydrogen and oxygen to explode.Fire or Explosion Prevention
Fire may result from lubricating oil or fuel sprayed on hot surfaces causing personal injury and property damage. Inspect all lines and tubes for wear or deterioration. They must be routed, supported or clamped securely. Tighten all connections to the recommended torque. Leaks can cause fires.Determine whether the engine will be operated in an environment in which combustible gases could be drawn through the air inlet system. These gases could cause the engine to overspeed, which in turn could seriously damage the engine and result in bodily injury or property damage.If your application involves the presence of combustible gases, consult your Caterpillar dealer to obtain additional information concerning protection devices (i.e. air inlet shutoff) suitable for the application involved.All fuels, most lubricants and some coolant mixtures are flammable.Diesel fuel is flammable. Gasoline is flammable. The mixture of diesel and gasoline fumes are extremely explosive.Do not smoke while refueling or in a refueling area.Do not smoke in areas where batteries are charged, or where flammable materials are stored.Batteries give off flammable fumes which can explode.Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Remove all flammable materials such as fuel, oil and other debris before they accumulate on the engine.Do not expose the engine to flames, burning brush, etc., if at all possible.Shields (if equipped), which protect hot exhaust components from oil or fuel spray in the event of a line, tube or seal failure, must be installed correctly.Provide adequate and proper waste oil disposal. Oil and fuel filters must be properly installed and housing covers tightened to proper torque when being changed.Batteries must be kept clean, covers kept on all cells, recommended cables and connections used and battery box covers kept in place when operating.When starting from an external source, always connect the positive (+) jumper cable to the POSITIVE (+) terminal of

Have questions with 107692-1801?





Group cross 107692-1801 ZEXEL

Isuzu 

9 400 613 341 
8976024190 
INJECTION-PUMP ASSEMBLY
6HH1
107692-1801  
9 400 613 192 
8976024191 
INJECTION-PUMP ASSEMBLY
6HH1
9 400 619 039 
8976029940 
INJECTION-PUMP ASSEMBLY
6HH1
Back to top