107692-1232 ZEXEL 9 400 611 112 BOSCH INJECTION-PUMP ASSEMBLY 9400611112 1076921232 8943957922


 

Information injection-pump assembly

BOSCH 9 400 611 112 9400611112
ZEXEL 107692-1232 1076921232
ISUZU 8943957922 8943957922
107692-1232 INJECTION-PUMP ASSEMBLY
Rating:
64
Buy INJECTION-PUMP ASSEMBLY 107692-1232 zexel genuine, new aftermarket engine parts with delivery

Service parts 107692-1232 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 107069-0080
3. GOVERNOR 105933-0491
4. SUPPLY PUMP 105237-6110
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105664-2011
7. COUPLING PLATE 156638-6720
9. _
10. NOZZLE AND HOLDER ASSY 105118-5817
11. Nozzle and Holder 8-94394-606-5
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105048-3915
14. NOZZLE 105017-9000
15. NOZZLE SET

Include in #1:

107692-1232 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
107692-1232 
9 400 611 112 
8943957922  ISUZU
INJECTION-PUMP ASSEMBLY
6HE1-TCN K 14CG INJECTION PUMP ASSY TICS MD-TI6 TICS




Information:

Oils
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.Keep all exhaust manifold and turbocharger shields in place to protect hot exhaust from oil spray in the event of a line, tube or seal failure.Always wear protective glasses when working with batteries. Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes. Wash hands after touching batteries and connectors. Use of gloves is recommended.Fire or Explosion Prevention
A flash fire can result in personal injury if crankcase covers are removed within fifteen minutes after an emergency shutdown.Fire may result from lubricating oil or fuel sprayed on hot surfaces causing personal injury and property damage. Inspect all lines and tubes for wear or deterioration. They must be routed, supported or clamped securely. Tighten all connections to the recommended torque.Exhaust shields (if equipped), which protect hot exhaust components from oil or fuel spray in the event of a line, tube or seal failure, must be installed correctly.Determine whether the engine will be operated in an environment in which combustible gases could be drawn through the air inlet system. These gases could cause the engine to overspeed, which in turn could seriously damage the engine and result in bodily injury or property damage. If your application involves the presence of combustible gases, consult your Caterpillar dealer to obtain additional information concerning protection devices suitable for the application involved.All fuels, most lubricants and some coolant mixtures are flammable. Diesel fuel is flammable. Gasoline is flammable. The mixture of diesel and gasoline fumes are extremely explosive. Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Provide adequate and safe disposal of waste oil and petroleum products. Follow all federal, state and local laws and regulations regarding waste oil and hazardous waste.Oil and fuel filters must be properly installed and tightened when being changed.Remove all flammable materials such as fuel, oil and other debris before they accumulate on the engine.Collect drained liquids and wipe up all oil, fuel or coolant spills. Remember; all fuels, most lubricants and some coolant mixtures are flammable as well as creating a hazard to walking if spilled.DO NOT SMOKE while refueling or in a refueling area. DO NOT SMOKE in areas where batteries are charged, or where flammable materials are stored. Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Clean and tighten all electrical connections. Check regularly for loose or frayed electrical wires. Refer to maintenance schedules for interval. Have all loose or frayed electrical wires tightened, repaired or replaced before operating the engine.Wiring must be kept in good condition, properly routed and firmly attached. Routinely inspect wiring for wear or deterioration. Loose, unattached, or unnecessary wiring must be eliminated. All wires and cables must be of

Have questions with 107692-1232?





Group cross 107692-1232 ZEXEL

Isuzu 

9 400 619 007 
1156029480 
INJECTION-PUMP ASSEMBLY
6BG1-TC1
 
8943957900 
INJECTION-PUMP ASSEMBLY
6HE1-TCS
 
8943957901 
INJECTION-PUMP ASSEMBLY
6HE1-TCS
9 400 611 110 
8943957902 
INJECTION-PUMP ASSEMBLY
6HE1-TCS
 
8943957910 
INJECTION-PUMP ASSEMBLY
6HE1-TCN
 
8943957911 
INJECTION-PUMP ASSEMBLY
6HE1-TCN
9 400 611 111 
8943957912 
INJECTION-PUMP ASSEMBLY
6HE1-TCN
9 400 619 991 
8943957920 
INJECTION-PUMP ASSEMBLY
6HE1-TCN
 
8943957921 
INJECTION-PUMP ASSEMBLY
6HE1-TCN
107692-1232  
9 400 611 112 
8943957922 
INJECTION-PUMP ASSEMBLY
6HE1-TCN
 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

F 019 Z10 082 
8943903750 
INJECTION-PUMP ASSEMBLY
6HE1-TC
 
8943903751 
INJECTION-PUMP ASSEMBLY
6HE1-TC
9 400 619 008 
8943903752 
INJECTION-PUMP ASSEMBLY
6HE1-TC
 
8943906180 
INJECTION-PUMP ASSEMBLY
6HE1-TCS
 
8943906181 
INJECTION-PUMP ASSEMBLY
6HE1-TCS
 
8943906182 
INJECTION-PUMP ASSEMBLY
6HE1-TCS
9 400 611 854 
8943906183 
INJECTION-PUMP ASSEMBLY
6HE1-TCS
 
8943906190 
INJECTION-PUMP ASSEMBLY
6HE1-TCC
 
8943906191 
INJECTION-PUMP ASSEMBLY
6HE1-TCC
9 400 611 671 
8943906192 
INJECTION-PUMP ASSEMBLY
6HE1-TCC
9 400 612 184 
8943906193 
INJECTION-PUMP ASSEMBLY
6HE1-TCC
 
8943911091 
INJECTION-PUMP ASSEMBLY
6HE1-TCN
 
8943911092 
INJECTION-PUMP ASSEMBLY
6HE1-TCN
9 400 612 086 
8943911093 
INJECTION-PUMP ASSEMBLY
6HE1-TCN
 
8943908910 
INJECTION-PUMP ASSEMBLY
6HH1
 
8943915310 
INJECTION-PUMP ASSEMBLY
6HE1-TCC
9 400 612 958 
8943915311 
INJECTION-PUMP ASSEMBLY
6HE1-TCC
Back to top