107691-2086 ZEXEL 9 400 618 885 BOSCH INJECTION-PUMP ASSEMBLY 9400618885 1076912086


 

Information injection-pump assembly

BOSCH 9 400 618 885 9400618885
ZEXEL 107691-2086 1076912086
107691-2086 INJECTION-PUMP ASSEMBLY
Rating:
13
Buy INJECTION-PUMP ASSEMBLY 107691-2086 zexel genuine, new aftermarket engine parts with delivery

Service parts 107691-2086 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 107069-0100
3. GOVERNOR 105933-0076
4. SUPPLY PUMP 105237-6130
5. AUTOM. ADVANCE MECHANIS 105681-5290
6. COUPLING PLATE 105663-0860
7. COUPLING PLATE
9. _
10. NOZZLE AND HOLDER ASSY 105160-4041
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105030-3550
14. NOZZLE 105025-2770
15. NOZZLE SET

Include in #1:

107691-2086 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
107691-2086 
107691-2087 
9 400 618 885 
   
INJECTION-PUMP ASSEMBLY
6D16T4 * K




Information:

Parts Location
Illustration 2 g01880455
Exploded view
Illustration 3 g01880482
Diesel Particulate Filter Group (shown installed) (1) 5P-1076 Hard Washer (2) 8T-4121 Hard Washer (3) 8T-4139 Bolt (4) 8T-4195 Bolt (5) 141-1480 Clamp As (6) 233-8141 Diesel Particulate Filter Gp (7) 8T-4244 Nut (8) 235-3962 Support As (9) 235-3963 Clamp As Installation Procedure
You must thoroughly understand the guidelines in Special Instruction, REHS5606, "Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications)" before you attempt any part of the following installation procedure.The installation procedure that follows is specific for the listed machines.Diesel Particulate Filter Installation
Illustration 4 g01833715
Right Side View (14) Muffler (existing) (15) 208-5448 Support As (existing) (16) 208-5451 Support As (existing)
Remove the existing muffler (14). Refer to the appropriate Disassembly and Assembly manual for your machine. Refer to Illustration 4.
Remove the existing 208-5448 Support As (15) from the engine. Discard the existing support assembly. Refer to Illustration 4.Note: Do not remove the existing 208-5451 Support As (16). Refer to Illustration 4.
Illustration 5 g01880233
(2) 8T-4121 Hard Washers (4) 8T-4195 Bolts (8) 235-3962 Support As
Position 235-3962 Support As (8) in the former location for support assembly (15). Refer to Illustration 4.
Secure support assembly (8) by using two 8T-4195 Bolts (4) and two 8T-4121 Hard Washers (2). Refer to Illustration 5.
Illustration 6 g01879959
(1) 5P-1076 Hard Washers (3) 8T-4139 Bolts (7) 8T-4244 Nut (8) 235-3962 Support As (9) 235-3963 Clamp As (Lower half)
Remove the two bolts, two hard washers, two lock washers, and two nuts from 235-3963 Clamp As (9). Keep these parts together along with

Have questions with 107691-2086?





Group cross 107691-2086 ZEXEL

F 019 Z10 711 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

F 019 Z10 712 
ME075436 
INJECTION-PUMP ASSEMBLY
6D16T4
 
 
INJECTION-PUMP ASSEMBLY
9 400 619 613 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
F 019 Z10 081 
 
INJECTION-PUMP ASSEMBLY
107691-2086  

107691-2087 
9 400 618 885 
 
INJECTION-PUMP ASSEMBLY
6D16T4

Mitsubishi 

F 019 Z20 324 
ME075516 
INJECTION-PUMP ASSEMBLY
6D16T4
Back to top