106971-3154 ZEXEL 9 400 618 693 BOSCH INJECTION-PUMP ASSEMBLY 9400618693 1069713154 220007481d

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH 9 400 618 693 9400618693

ZEXEL 106971-3154 1069713154

HINO 220007481D 220007481d

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106971-3154 zexel genuine, new aftermarket engine parts with delivery

Service parts 106971-3154 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106097-5621

3. GOVERNOR 105489-3103

4. SUPPLY PUMP 105237-1670

5. AUTOM. ADVANCE MECHANIS 105683-0070

6. COUPLING PLATE 105664-0851

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-7183

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 15.7(160)/24.5(250)

13. NOZZLE-HOLDER 105030-3482

14. NOZZLE

105015-8710

15. NOZZLE SET

Include in #1:

106971-3154 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 618 693 9400618693

ZEXEL 106971-3154 1069713154

HINO 220007481D 220007481d

Zexel num

Bosch num

Firm num

Name

106971-3154

9 400 618 693

220007481D HINO

INJECTION-PUMP ASSEMBLY
V25C K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 134424-1020

Overflow valve opening pressure kPa 127 107 147

Overflow valve opening pressure kgf/cm2 1.3 1.1 1.5

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-10-9-4 -3-6-5-8 -7-2

Pre-stroke mm 4.5 4.44 4.5

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-10 deg. 27 26.75 27.25

Difference between angles 2
Cal 1-9 deg. 72 71.75 72.25

Difference between angles 3
Cal 1-4 deg. 99 98.75 99.25

Difference between angles 4
Cal 1-3 deg. 144 143.75 144.25

Difference between angles 5
Cal 1-6 deg. 171 170.75 171.25

Difference between angles 6
Cal 1-5 deg. 216 215.75 216.25

Difference between angles 7
Cal 1-8 deg. 243 242.75 243.25

Difference between angles 8
Cal 1-7 deg. 288 287.75 288.25

Difference between angles 9
Cyl.1-2 deg. 315 314.75 315.25

Injection quantity adjustment

Adjusting point A

Rack position 8.8

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 151.4 149.4 153.4

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 8.55

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 146.4 143.4 149.4

Fixing the lever *

Injection quantity adjustment_03

Adjusting point C

Rack position 8.8+-0.5

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 140.2 134.2 146.2

Fixing the lever *

Injection quantity adjustment_04

Adjusting point D

Rack position 7.65

Pump speed r/min 1200 1200 1200

Average injection quantity mm3/st. 113.8 110.8 116.8

Fixing the lever *

Injection quantity adjustment_05

Adjusting point E

Rack position 4+-0.5

Pump speed r/min 225 225 225

Average injection quantity mm3/st. 14 11 17

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Injection quantity adjustment_06

Adjusting point F

Rack position 9.8+-0.1

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 181.9 177.9 185.9

Fixing the lever *

Remarks
Startup boost setting

Injection quantity adjustment_07

Adjusting point G

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 195 195 205

Fixing the lever *

Remarks
After startup boost setting

Timer adjustment

Pump speed r/min 600--

Advance angle deg. 0 0 0

Load 1/4

Remarks
Start

Timer adjustment_02

Pump speed r/min 550

Advance angle deg. 0.3

Load 1/4

Timer adjustment_03

Pump speed r/min (620--)

Advance angle deg. 1 0.7 1.3

Load 4/4

Remarks
Measure the actual speed.

Timer adjustment_04

Pump speed r/min 900+50

Advance angle deg. 1 0.7 1.3

Load 3/4

Timer adjustment_05

Pump speed r/min 1100-50

Advance angle deg. 4.75 4.45 5.05

Load 4/4

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm. (2)Set idle at point K (N = N1, R = R1) and confirm that the rack position does not exceed R2 at point J (N = N2). (3)Excess fuel setting for starting: SXL (4)Damper spring setting
----------
N1=300r/min R1=4mm N2=1100r/min R2=3mm SXL=9.8+-0.1mm
----------

Speed control lever angle

F:Full speed
----------

----------
a=14deg+-5deg

0000000901

F:Full load I:Idle (1)At R = not less than aa (2)Stopper bolt setting
----------
aa=57.5mm
----------
a=41.5deg+-3deg b=17deg+-5deg

Stop lever angle

N:Engine manufacturer's normal use S:Stop the pump. (1)Rack position = aa (2)Free (at delivery) (3)Rack position bb
----------
aa=12.5mm bb=2.3-0.5mm
----------
a=(30.5deg) b=1deg+-5deg c=30deg+-5deg

Timing setting

(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(80deg)

Information:

Connecting Rods And Pistons
1. Put a liberal amount of clean engine oil on the crankshaft journals, main bearings and thrust washers. Put the upper half of the main bearings and the crankshaft in position in