106971-0862 ZEXEL 9 400 618 656 BOSCH INJECTION-PUMP ASSEMBLY 9400618656 1069710862 1671397163

Information injection-pump assembly

BOSCH 9 400 618 656 9400618656

ZEXEL 106971-0862 1069710862

NISSAN-DIESEL 1671397163 1671397163

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106971-0862 zexel genuine, new aftermarket engine parts with delivery

Service parts 106971-0862 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106097-5551

3. GOVERNOR 105487-5350

4. SUPPLY PUMP 105237-4190

5. AUTOM. ADVANCE MECHANIS 105681-1011

6. COUPLING PLATE 105663-0570

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-7720

11. Nozzle and Holder 16600-97071

12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}

13. NOZZLE-HOLDER 105030-4190

14. NOZZLE

105015-7890

15. NOZZLE SET

Include in #1:

106971-0862 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num

Bosch num

Firm num

Name

106971-0862

9 400 618 656

1671397163 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
RF10 * K

Information:

(1) Tension of brush spring ... 80 to 90 oz.(2.27 to 2.55 kg)(2) Torque for bolts ... 8 lb. ft.(1.11 mkg)(3) Torque for terminal nuts ... 20 to 25 lb. ft.(2.8 to 3.5 mkg)(4) Clearance for the pinion ... .020 to .050 in.(0.51 to 1.27 mm)2P6162 24V (Prestolite Number MES 6301 K) 3P110 24V (Prestolite Number MFY 6401 I)
Rotation is clockwise when seen from drive end.Minimum speed with no load ... 5000 rpmCurrent consumption (draw) with no load: Maximum at 20 V ... 77 A(1) Tension of brush spring ... 80 to 90 oz.(2.27 to 2.55 kg)(2) Torque for housing bolts ... 8 lb. ft.(1.11 mkg)(3) Torque for terminal nuts ... 20 to 25 lb. ft.(2.8 to 3.5 mkg)(4) Clearance between pinion and housing (pinion clearance) ... .020 to .050 in.(0.51 to 1.27 mm)2P2502 24V (Delco-Remy Number 1113393)
Rotation is clockwise when seen from drive end. Minimum speed with no load ... 5500 rpmMaximum speed with no load ... 7500 rpmCurrent consumption (draw) at no load: Minimum with solenoid at 20 V ... 92.5 AMaximum with solenoid at 20 V ... 120.1 AClearance between pinion and housing (pinion clearance) ... .36 in.(9.1 mm) (1) Tension of brush spring* ... 36 to 40 oz.(1.01 to 1.14 kg)(2) Torque for terminal nuts ... 20 to 25 lb. ft.(2.8 to 3.5 mkg) ... 80 oz.(2.27 kg)*Minimum for leaf springs 4N3182 24V (Delco-Remy Number 1114711)
Rotation is clockwise when seen from drive end.Minimum speed with no load ... 5500 rpmMaximum speed with no load ... 7500 rpmCurrent consumption (draw) at no load: Minimum with solenoid at 20V ... 108.5 AMaximum with solenoid at 20V ... 135.1 AClearance between pinion and housing (pinion clearance) ... .36 in.(9.1 mm) (1) Tension of brush spring ... 80 oz.(2.26 kg)(2) Torque for screws holding nose housing to lever housing ... 13 to 17 lb. ft.(1.8 to 2.4 mkg)(3) Torque for terminal nuts ... 20 to 25 lb. ft.(2.8 to 3.5 mkg)