Information injection-pump assembly
ZEXEL
106891-1354
1068911354
ISUZU
1156027703
1156027703
Rating:
Cross reference number
Zexel num
Bosch num
Firm num
Name
106891-1354
1156027703 ISUZU
INJECTION-PUMP ASSEMBLY
8PD1-N * K
8PD1-N * K
Information:
Start By:a. remove oil pump1. Check the main bearing caps for identification for their location and direction in the block. The caps must be installed in the same location and direction from which they were removed. 2. Remove No. 2 through No. 6 bearing caps (1). Remove thrust plates from the No. 4 main bearing.
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either the crankshaft or cylinder block or both.
3. Remove the upper halves of the main bearings by putting tool (A) in oil hole (2) in the crankshaft. Turn the crankshaft in the direction which will push the
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either the crankshaft or cylinder block or both.
3. Remove the upper halves of the main bearings by putting tool (A) in oil hole (2) in the crankshaft. Turn the crankshaft in the direction which will push the
Have questions with 106891-1354?
Group cross 106891-1354 ZEXEL
Isuzu
Isuzu
106891-1354
1156027703
INJECTION-PUMP ASSEMBLY
8PD1-N
8PD1-N