106873-7352 ZEXEL 9 400 619 422 BOSCH INJECTION-PUMP ASSEMBLY 9400619422 1068737352 me354502


 

Information injection-pump assembly

BOSCH 9 400 619 422 9400619422
ZEXEL 106873-7352 1068737352
MITSUBISHI ME354502 me354502
106873-7352 INJECTION-PUMP ASSEMBLY
Rating:
40
Buy INJECTION-PUMP ASSEMBLY 106873-7352 zexel genuine, new aftermarket engine parts with delivery

Service parts 106873-7352 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106080-7030
3. GOVERNOR 105923-1771
4. SUPPLY PUMP 105237-0270
5. AUTOM. ADVANCE MECHANIS 105681-1650
6. COUPLING PLATE 105664-2230
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-7502
11. Nozzle and Holder ME094539
12. Open Pre:MPa(Kqf/cm2)
13. NOZZLE-HOLDER 105041-4121
14. NOZZLE
15. NOZZLE SET 105019-2110

Include in #1:

106873-7352 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
106873-7352 
9 400 619 422 
ME354502  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC9 K




Information:

Oils
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.Keep all exhaust manifold and turbocharger shields in place to protect hot exhaust from oil spray in the event of a line, tube or seal failure.Batteries
Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes.Wash hands after touching batteries and connectors. Use of gloves is recommended.Batteries give off flammable fumes which can explode. Ensure there is proper ventilation for batteries which are located in an enclosure.Always thaw a frozen battery before jump starting. Frozen batteries can explode.Do not smoke when observing battery electrolyte levels.Always wear protective glasses when working with batteries.Never disconnect any charging unit circuit or battery circuit cable from the battery when charging unit is operating. A spark can cause the flammable vapor mixture of hydrogen and oxygen to explode.Fire or Explosion Prevention
Fire may result from lubricating oil or fuel sprayed on hot surfaces causing personal injury and property damage. Inspect all lines and tubes for wear or deterioration. They must be routed, supported or clamped securely. Tighten all connections to the recommended torque. Leaks can cause fires.Determine whether the engine will be operated in an environment in which combustible gases could be drawn through the air inlet system. These gases could cause the engine to overspeed, which in turn could seriously damage the engine and result in bodily injury or property damage.If your application involves the presence of combustible gases, consult your Caterpillar dealer to obtain additional information concerning protection devices (i.e. air inlet shutoff) suitable for the application involved.All fuels, most lubricants and some coolant mixtures are flammable.Diesel fuel is flammable. Gasoline is flammable. The mixture of diesel and gasoline fumes is extremely explosive.Do not smoke while refueling or in a refueling area.Do not smoke in areas where batteries are charged, or where flammable materials are stored.Batteries give off flammable fumes which can explode.Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Remove all flammable materials such as fuel, oil and other debris before they accumulate on the engine.Do not expose the engine to flames, burning brush, etc., if at all possible.Shields (if equipped), which protect hot exhaust components from oil or fuel spray in the event of a line, tube or seal failure, must be installed correctly.Provide adequate and proper waste oil disposal. Oil and fuel filters must be properly installed and housing covers tightened to proper torque when being changed.Batteries must be kept clean, covers kept on all cells, recommended cables and connections used and battery box covers kept in place when operating.When starting from an external source, always connect the positive (+) jumper cable to the POSITIVE (+) terminal of the

Have questions with 106873-7352?





Group cross 106873-7352 ZEXEL

Mitsubishi 

9 400 611 037 
ME094239 
INJECTION-PUMP ASSEMBLY
8DC9
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 482 
ME094240 
INJECTION-PUMP ASSEMBLY
8DC9
9 400 611 038 
ME162638 
INJECTION-PUMP ASSEMBLY
8M20
9 400 618 483 
ME162639 
INJECTION-PUMP ASSEMBLY
8M20
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 484 
ME094377 
INJECTION-PUMP ASSEMBLY
8DC9
F 019 Z10 210 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 485 
ME094288 
INJECTION-PUMP ASSEMBLY
8DC9
106873-7352  
9 400 619 422 
ME354502 
INJECTION-PUMP ASSEMBLY
8DC9
9 400 619 465 
 
INJECTION-PUMP ASSEMBLY
9 400 619 466 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 486 
ME094376 
INJECTION-PUMP ASSEMBLY
8DC9T2
9 400 618 487 
ME162789 
INJECTION-PUMP ASSEMBLY
8M20
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 618 488 
ME094420 
INJECTION-PUMP ASSEMBLY
8DC9T2
9 400 611 039 
ME098734 
INJECTION-PUMP ASSEMBLY
8DC9T2
F 019 Z10 233 
ME443024 
INJECTION-PUMP ASSEMBLY
8DC9T2
Back to top