106871-4330 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1068714330


 

Information injection-pump assembly

ZEXEL 106871-4330 1068714330
106871-4330 INJECTION-PUMP ASSEMBLY
Rating:
19
Buy INJECTION-PUMP ASSEMBLY 106871-4330 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
106871-4330 
106871-4332 
 
  DPICO
INJECTION-PUMP ASSEMBLY
EF750 * Q




Information:


ACTION REQUIRED
Take the following actions after a failure occurs on one or more injectors in any of the engines in the Affected Product. A failure is considered extreme fuel dilution, in the range of 20 liters per minute.
- If one or more injectors fail it may be necessary to replace additional injectors at the time of repair.
- Verify the injector serial number of the failed injector. Verify the injector serial number of the remaining injectors in the engine. Refer to Image1 for an example of part number (A) and injector serial number identification (B). If the injector serial number falls within the range of 1134640-1234085, the injector should be replaced. The 154-6389 Buttons on the engine should also be replaced. The 154-6389 Button and 9F-7707 Retaining Clip on the injector rocker arms should also be replaced.
Only injectors falling within the range of 1134640-1234085 should be replaced and claimed under this program.
Refer to the Disassembly and Assembly manual for the removal/installation procedure of the unit injector and button.
Excessive fuel dilution of the engine oil requires changing the engine oil and filters. Refer to the appropriate Service Manual as necessary.
Image1
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-3000 hrs,
0-36 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 2.6-hour job for Group 1
An additional 0.6 hours labor will be allowed per injector replaced due to inspection results.
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-3000 hrs,
0-36 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 2.6-hour job for Group 2
An additional 0.6 hours labor will be allowed per injector replaced due to inspection results.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Have questions with 106871-4330?





Group cross 106871-4330 ZEXEL

Dpico 

F 019 Z20 247 
 
INJECTION-PUMP ASSEMBLY
8DC9
 
 
INJECTION-PUMP ASSEMBLY
EF750
 
 
INJECTION-PUMP ASSEMBLY
EF750
F 019 Z20 248 
 
INJECTION-PUMP ASSEMBLY
EF750
F 019 Z20 249 
 
INJECTION-PUMP ASSEMBLY
EF750
106871-4330  

106871-4332 
 
 
INJECTION-PUMP ASSEMBLY
EF750
 
 
INJECTION-PUMP ASSEMBLY
EF750
F 019 Z20 250 
 
INJECTION-PUMP ASSEMBLY
EF750
 
 
INJECTION-PUMP ASSEMBLY
RF8
9 400 612 082 
 
INJECTION-PUMP ASSEMBLY
RF8
 
 
INJECTION-PUMP ASSEMBLY
RG8
 
 
INJECTION-PUMP ASSEMBLY
RG8
F 019 Z20 251 
 
INJECTION-PUMP ASSEMBLY
RG8
 
 
INJECTION-PUMP ASSEMBLY
EF750TCI
 
 
INJECTION-PUMP ASSEMBLY
EF750TCI
 
 
INJECTION-PUMP ASSEMBLY
EF750TCI
 
 
INJECTION-PUMP ASSEMBLY
EF750TCI
 
 
INJECTION-PUMP ASSEMBLY
EF750TCI
F 019 Z20 252 
 
INJECTION-PUMP ASSEMBLY
EF750TCI
F 019 Z20 253 
 
INJECTION-PUMP ASSEMBLY
CU-PJT
Back to top