Information injection-pump assembly
ZEXEL
106693-6031
1066936031
ISUZU
1156026671
1156026671
Rating:
Service parts 106693-6031 INJECTION-PUMP ASSEMBLY:
1.
_
7.
COUPLING PLATE
8.
_
9.
_
11.
Nozzle and Holder
1-15300-218-1
12.
Open Pre:MPa(Kqf/cm2)
17.7{180}/22.1{225}
15.
NOZZLE SET
Include in #1:
106693-6031
as INJECTION-PUMP ASSEMBLY
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Fuel Filter
(For in-line fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump and fuel hoses.
(For distributor-type fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump and fuel hoses.
Fuel Injection Pipe, Fuel Leak-Off Pipe and Fuel Injection Nozzle
(For in-line fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump, nozzle inlet connectors and injection pipes.
(For distributor-type fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump, nozzle inlet connectors and injection pipes.
Fuel Injection Pump
(In-line fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump.
(Distributor-type fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the injection pump.
Removal of Fuel Injection Pump
(1) Check the alignment marks stamped on the flange of the fuel injection pump and the pump mounting flange.(2) Remove the front cover from the engine.(3) Place alignment marks on the fuel injection pump gear and idler gear.(4) Unscrew the mounting bolts from the fuel injection pump flange, and remove the fuel injection pump together with the flange from the front plate. (a) After the fuel injection pump is removed, do not turn the engine.(b) When removing the pump gear, loosen the gear retaining nut while the pump is mounted on the engine.
Removal of fuel injection pump (1)
Removal of fuel injection pump (2)
(For in-line fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump and fuel hoses.
(For distributor-type fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump and fuel hoses.
Fuel Injection Pipe, Fuel Leak-Off Pipe and Fuel Injection Nozzle
(For in-line fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump, nozzle inlet connectors and injection pipes.
(For distributor-type fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump, nozzle inlet connectors and injection pipes.
Fuel Injection Pump
(In-line fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump.
(Distributor-type fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the injection pump.
Removal of Fuel Injection Pump
(1) Check the alignment marks stamped on the flange of the fuel injection pump and the pump mounting flange.(2) Remove the front cover from the engine.(3) Place alignment marks on the fuel injection pump gear and idler gear.(4) Unscrew the mounting bolts from the fuel injection pump flange, and remove the fuel injection pump together with the flange from the front plate. (a) After the fuel injection pump is removed, do not turn the engine.(b) When removing the pump gear, loosen the gear retaining nut while the pump is mounted on the engine.
Removal of fuel injection pump (1)
Removal of fuel injection pump (2)