106692-4361 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1066924361


 

Information injection-pump assembly

ZEXEL 106692-4361 1066924361
106692-4361 INJECTION-PUMP ASSEMBLY
Rating:
23
Buy INJECTION-PUMP ASSEMBLY 106692-4361 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
106692-4361 
 
   
INJECTION-PUMP ASSEMBLY




Information:


Table 4
Storage Temperature Expected DEF Life
Below 25° C (77° F) 18 months
25° C (77° F) to 30° C (86° F) 12 months
30° C (86° F) to 35° C (95° F) 6 months
Above 35° C (95° F) test quality before use Refer to "ISO 22241" document series for more information about DEF quality control.Note: Dispose of all fluids according to applicable regulations and mandates.DEF/Urea Solution Recommendations for Marine Engines
The US has adopted/approved NOx Emissions Control Area (ECA) regulations. Per ECAs, vessels that are 2016 and later models, or vessels that are modified to 2016 models, are required to meet Tier III NOx standards. These engines may require the use of Diesel Exhaust Fluid (DEF) and other urea solutions for engines equipped with Selective Catalytic Reduction (SCR) systems. If required, Cat marine engines are designed to operate on DEF of urea concentrations of 32.5 percent (by weight) or 40 percent (by weight). The crystallization temperature of 40 percent urea solution is 0° C (32° F). If urea solution ambient temperatures are routinely below 5° C (41° F) and supplemental heat is not applied to urea storage, then 32.5 percent solution should be used and maintained at a temperature above −0° C (14° F). Urea solutions should be maintained above the specified freezing temperature. Consult the urea supplier and follow the guidelines provided in this article for handling and recommendations.Vessels that are traveling internationally and have on/off NOx controls that allow the vessels to meet ECA regulations must enable NOx controls prior to entering the ECA. For US flagged vessels, the SCR must be activated and deactivated automatically based on input from the Global Positioning System. For US flagged vessels, on/off NOx controls are allowed on engines > 30 liters/cylinder and are not allowed on engines < 30 liters/cylinder unless installed on a vessel with propulsion engines >30 liters/cylinder. Otherwise the NOx control systems on Category 1 and 2 engines must always be on. Foreign destinations should be reviewed for supply of ULSD fuel and DEF prior to departure. Exemptions for ULSD or DEF use due to fluid unavailability per 40 CFR part 1042.650(a) by US flagged vessels operating outside of US waters may be requested from the US Environmental Protection Agency (EPA). The EPA can be contacted at the following address:complianceinfo@epa.gov
When used in marine engines, DEF of 32.5 percent urea concentration must meet all the guidelines and quality recommendations given in this Chapter.When used in marine engines, urea solution of 40 percent urea concentration must follow all the DEF guidelines and quality recommendations given in this chapter and must meet the characteristics listed in Table 5 for 40 percent concentration. The supplier should provide documentation to prove that the urea solution is compliant with the characteristics published in Table 5.Refer to your engine Operation and Maintenance Manual to determine the concentration of urea solution allowed in your engine.
Cat does not warrant the quality or performance of non-Cat fluids and greases.
General Characteristics of DEF
For detailed information on the requirements and

Have questions with 106692-4361?





Group cross 106692-4361 ZEXEL

Komatsu 

 
6151711120 
INJECTION-PUMP ASSEMBLY
S6D125
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 836 
6151711122 
INJECTION-PUMP ASSEMBLY
S6D125
9 400 617 837 
6151711630 
INJECTION-PUMP ASSEMBLY
S6D125
 
 
INJECTION-PUMP ASSEMBLY
S6D125
9 400 610 231 
6151711220 
INJECTION-PUMP ASSEMBLY
S6D125
 
6151711220 
INJECTION-PUMP ASSEMBLY
S6D125
 
 
INJECTION-PUMP ASSEMBLY
S6D125
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 610 232 
6151711991 
INJECTION-PUMP ASSEMBLY
S6D125
 
6151711992 
INJECTION-PUMP ASSEMBLY
S6D125
9 400 617 838 
6151711993 
INJECTION-PUMP ASSEMBLY
S6D125
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 839 
6151711921 
INJECTION-PUMP ASSEMBLY
S6D125
 
 
INJECTION-PUMP ASSEMBLY
S6D170
 
 
INJECTION-PUMP ASSEMBLY
9 400 610 233 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 840 
6162731580 
INJECTION-PUMP ASSEMBLY
S6D170
 
6162731380 
INJECTION-PUMP ASSEMBLY
S6D170
106692-4361  
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

 
6162731381 
INJECTION-PUMP ASSEMBLY
S6D170
 
 
INJECTION-PUMP ASSEMBLY
S6D170
 
6162731720 
INJECTION-PUMP ASSEMBLY
S6D170
 
6162731721 
INJECTION-PUMP ASSEMBLY
S6D170
 
 
INJECTION-PUMP ASSEMBLY
SA6D170
 
6162731710 
INJECTION-PUMP ASSEMBLY
SA6D170
 
6162731711 
INJECTION-PUMP ASSEMBLY
SA6D170
 
 
INJECTION-PUMP ASSEMBLY
S6D125
 
6151751211 
INJECTION-PUMP ASSEMBLY
S6D125
Back to top