106692-4144 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1066924144


 

Information injection-pump assembly

ZEXEL 106692-4144 1066924144
106692-4144 INJECTION-PUMP ASSEMBLY
Rating:
54
Buy INJECTION-PUMP ASSEMBLY 106692-4144 zexel genuine, new aftermarket engine parts with delivery

Service parts 106692-4144 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106069-5451
3. GOVERNOR 105407-2411
4. SUPPLY PUMP 105217-1490
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105663-0360
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105111-4060
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 24.5(250)
13. NOZZLE-HOLDER 105041-7040
14. NOZZLE 105015-5950
15. NOZZLE SET

Include in #1:

106692-4144 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
106692-4144 
 
   
INJECTION-PUMP ASSEMBLY




Information:


Table 4
Cat Specification for Biodiesel Fuel
Property Test Method Test Method Units Limits
United States International Specific Properties of Fuel
Density at 15°C "ASTM D1298" "ISO 3675" g/cm3 0.86-0.90
Viscosity at 40°C "ASTM D445" "ISO 3104" mm2/s (cSt) 1.9-6.0
Flash Point "ASTM D93" "ISO 3679" °C 93 minimum
Pour Point
- Summer
- Winter "ASTM D97" "ISO 3016" °C 6 °C (10 °F) minimum below ambient temperature
Cloud Point "ASTM D2500" °C Report
Sulfur Content "ASTM D5453" "ISO 20846"
"ISO 20884" percent weight 0.0015 maximum
Distillation
- 10 percent Evaporation
- 90 percent Evaporation "ASTM D1160" °C To Be Determined
360
Carbon Residue, Conradson (CCR) "ASTM D4530" "ISO 10370" percent weight 0.05 maximum
Cetane Number "ASTM D613" "ISO 5165" 45 minimum
Sulfated Ash "ASTM D874" "ISO 3987" percent weight 0.02 maximum
Water/Sediment Content "ASTM D2709" "ISO 12937" percent volume 0.05 maximum
Copper Corrosion "ASTM D130" "ISO 2160" No. 1
Oxidation Stability "EN 14112" "EN 14112" hours 3 minimum
Esterification "EN 14103" "EN 14103" percent volume 97.5 minimum
Acid Value "ASTM D664" "EN 14104" mg KOH/g 0.5 maximum
Methanol Content "EN 14110" "EN 14110" percent weight 0.2 maximum
Monoglycerides "ASTM D6584" "EN 14105" percent weight 0.8 maximum
Diglycerides "ASTM D6584" "EN 14105" percent weight 0.2 maximum
Triglycerides "ASTM D6584" "EN 14105" percent weight 0.2 maximum
Free Glycerin "ASTM D6584" "EN 14105" percent weight 0.02 maximum
Total Glycerin "ASTM D6584" "EN 14105" percent weight 0.240 maximum
Phosphorus Content "ASTM D4951" "EN 14107" percent weight 0.001
Calcium and Magnesium combined "EN 14538" "EN 14538" ppm 5 maximum
Sodium and Potassium combined "EN 14538" "EN 14538" ppm 5 maximum
Cold Soak Filterability "ASTM D7501" -- seconds 360 maximum
Cleanliness "ASTM D7619" "ISO 4406" -- (1)
(1) Recommended cleanliness level for fuel as dispensed into machine or engine fuel tank is "ISO 18/16/13" or cleaner per "ISO 4406" or "ASTM D7619". Refer to the “Contamination Control” section in this Special Publication.Note: Fuels that meet the most current revision level of "ASTM D6751" or "EN 14214" may be used for blending with an acceptable distillate fuel. The conditions, recommendations, and limits that are noted in this Biodiesel section apply.Referenced Documents
Refer to the “Reference Material - Fuel” section of this Special Publication for the reference material for the information in this section.

Have questions with 106692-4144?





Group cross 106692-4144 ZEXEL

Komatsu 

 
6151711721 
INJECTION-PUMP ASSEMBLY
S6D125
9 400 617 824 
6151711723 
INJECTION-PUMP ASSEMBLY
S6D125
 
 
INJECTION-PUMP ASSEMBLY
S6D170
 
6162731212 
INJECTION-PUMP ASSEMBLY
S6D170
 
6162731213 
INJECTION-PUMP ASSEMBLY
S6D170
9 400 617 825 
6162731214 
INJECTION-PUMP ASSEMBLY
S6D170
 
 
INJECTION-PUMP ASSEMBLY
SA6D170
 
6162731251 
INJECTION-PUMP ASSEMBLY
SA6D170
 
6162731252 
INJECTION-PUMP ASSEMBLY
SA6D170
9 400 610 230 
6162731253 
INJECTION-PUMP ASSEMBLY
SA6D170
 
6151711930 
INJECTION-PUMP ASSEMBLY
S6D125
 
 
INJECTION-PUMP ASSEMBLY
S6D125
F 019 Z10 044 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 826 
6151711932 
INJECTION-PUMP ASSEMBLY
S6D125
 
6151711950 
INJECTION-PUMP ASSEMBLY
S6D125
 
 
INJECTION-PUMP ASSEMBLY
S6D125
106692-4144  
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 827 
6151711952 
INJECTION-PUMP ASSEMBLY
S6D125
9 400 617 828 
6151711311 
INJECTION-PUMP ASSEMBLY
S6D125
9 400 617 829 
6151711321 
INJECTION-PUMP ASSEMBLY
S6D125
 
6151711360 
INJECTION-PUMP ASSEMBLY
S6D125
 
6151711361 
INJECTION-PUMP ASSEMBLY
S6D125
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 830 
6151711832 
INJECTION-PUMP ASSEMBLY
S6D125
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 617 831 
6151711812 
INJECTION-PUMP ASSEMBLY
S6D125
Back to top