106691-6341 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1066916341 1156006612

Information injection-pump assembly

ZEXEL 106691-6341 1066916341

ISUZU 1156006612 1156006612

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106691-6341 zexel genuine, new aftermarket engine parts with delivery

Service parts 106691-6341 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106069-1111

3. GOVERNOR 105467-0420

4. SUPPLY PUMP 105237-1230

5. AUTOM. ADVANCE MECHANIS 105614-0460

6. COUPLING PLATE 105662-0350

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-4480

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 22.1(225)

13. NOZZLE-HOLDER 105031-4170

14. NOZZLE 105015-3210

15. NOZZLE SET

Include in #1:

106691-6341 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num

Bosch num

Firm num

Name

106691-6341

1156006612 ISUZU

INJECTION-PUMP ASSEMBLY
E120 * K

Information:

Remove The Fan
Illustration 1 g00871386
(1) Cable (2) Fan (3) Guard (4) Screws (5) Filter (6) Cover
Disconnect the power to the monitor.
Remove cover (6) and remove filter (5) .
Remove guard (3) by removing screws (4) that hold guard (3) in place.
Remove the back cover of the monitor by removing the 8 screws that hold the back cover in place. Refer to Testing And Adjusting, "Cover - Remove" for details on removing the back cover.
Remove the two wire ties that secure the power wires around fan (2) .
Illustration 2 g00871408
CPU Board (7) Connector
Follow cable (1) and disconnect the connector from CPU board (7). Disconnect the connector by pulling on the connector. Do not pull on the wires.
Remove fan (2) from the monitor.Install The Fan
Connect the connector of cable (1) to the CPU board (7) .
Position fan (2) so that the power wires are routed above fan (2) .
Secure fan (2) and secure guard (3) with screws (4) .
Replace filter (5) and replace cover (6) .
Secure the power wires to fan (2) by using the wire ties.
Replace the back cover of the monitor by using the 8 screws.