106682-4870 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1066824870


 

Information injection-pump assembly

ZEXEL 106682-4870 1066824870
106682-4870 INJECTION-PUMP ASSEMBLY
Rating:
74
Buy INJECTION-PUMP ASSEMBLY 106682-4870 zexel genuine, new aftermarket engine parts with delivery

Service parts 106682-4870 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106068-2062
3. GOVERNOR 105447-1070
4. SUPPLY PUMP 105237-1541
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105664-0540
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105111-4402
11. Nozzle and Holder 6212-11-3202
12. Open Pre:MPa(Kqf/cm2) 24.5{250}
13. NOZZLE-HOLDER 105041-7122
14. NOZZLE 105015-8070
15. NOZZLE SET

Include in #1:

106682-4870 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
106682-4870 
 
   
INJECTION-PUMP ASSEMBLY
SA12V140




Information:

The problems in this section are problems that do come about and are normally called "low power." These problems are not necessarily more common than engine problems, but they are possible problems which you need to read and check before an engine is disassembled.Read all of the items but make sure the first three are checked completely before making any engine test.Possible Causes/Corrections
Tachometer Error/To check, connect a tachometer of known accuracy to the engine. Run the engine and make a comparison of the readings of the vehicle and test tachometers. If vehicle tachometer is bad, make repairs as necessary or install a new tachometer. Engine Operated at High Altitude/Less oxygen at higher altitudes causes the engine horsepower to go down. There is no effect on the horsepower of the engine for the first 2280 m (7500 ft.) above sea level of operation. Brakes Do Not Completely Release/Check the brakes by feeling all the brake drums. If the brakes of a wheel do not completely release, the brake drum for that wheel will be hotter than the brake drums for the other wheels. With the truck lifted with a jack, the wheels must have free rotation when turned by hand. Extra Engine Driven Equipment/Air compressors, hydraulic pumps, alternator, and other engine driven equipment that has damage, or that was not installed correctly, or that is not in correct adjustment, can take more horsepower to drive than expected. If necessary, disconnect the equipment and test the engine. Speedometer Error/A bad speedometer does not give the correct speed or the correct indication of fuel consumption. An indication of low speed can cause the operator to feel that he has a power problem. Speeds Too High/The need for more horsepower is easy to see as the speed of the vehicle is increased. This is especially true if the front of the vehicle has a large surface area. Application personnel can give you the horsepower necessary for different vehicle designs at different speeds. Overload on Vehicle/Application personnel can give you the horsepower needs for different vehicles. High Moving Resistance/Soft ground conditions cause a need for more horsepower. To see if the problem is the engine, test the vehicle on a surface known to be good, or test on a chassis dynamometer. High Wind Resistance/The horsepower needs for a truck can be divided into two parts. Part of the horsepower is used to move the vehicle and part is used to get through the resistance of the wind. The horsepower necessary to get through the resistance of the wind will increase as the vehicle is used at higher speeds. Vehicles with large front area have a higher wind resistance and take more horsepower than those with a small front area. Some types of trucks, for example those used for the transportation of automobiles and/or boats have high wind resistance even if the front area is small. Moving against the wind has the same effect on wind resistance as does higher vehicle speed. Power Loss

Have questions with 106682-4870?





Group cross 106682-4870 ZEXEL

Komatsu 

9 400 612 232 
6162732112 
INJECTION-PUMP ASSEMBLY
SA6D170
9 400 611 797 
6162732133 
INJECTION-PUMP ASSEMBLY
SA6D170
9 400 612 672 
6162732142 
INJECTION-PUMP ASSEMBLY
SA6D170
9 400 617 579 
6162732173 
INJECTION-PUMP ASSEMBLY
SA6D170
9 400 617 580 
6162732421 
INJECTION-PUMP ASSEMBLY
SA6D170
9 400 612 080 
6162732411 
INJECTION-PUMP ASSEMBLY
SA6D170
9 400 617 581 
6215711830 
INJECTION-PUMP ASSEMBLY
SA12V140
106682-4870  
 
 
INJECTION-PUMP ASSEMBLY
SA12V140

Komatsu 

9 400 617 582 
6215711540 
INJECTION-PUMP ASSEMBLY
SA12V140
 
6166711610 
INJECTION-PUMP ASSEMBLY
SA12V170
9 400 617 583 
6166711611 
INJECTION-PUMP ASSEMBLY
SA12V170
 
6162731941 
INJECTION-PUMP ASSEMBLY
SA6D170
 
6162731942 
INJECTION-PUMP ASSEMBLY
SA6D170
 
6162731943 
INJECTION-PUMP ASSEMBLY
SA6D170
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 612 049 
6162731944 
INJECTION-PUMP ASSEMBLY
SA6D170
Back to top