Information injection-pump assembly
ZEXEL
106681-4000
1066814000
DAIHATSU
M14160
m14160
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
![SoGuDio Bolt Combination 14mm Outer Hexagon Bolt DIN933 304 Stainless Steel Hexagonal Screw Bolt (Size : M14160 [1 pc])](http://c1.a2109.com/_150/aws_api/41r/41rv1/41rv1l_mu5l.jpg)
$36.97
21 Dec 2021
0.9083[0.41] Pounds
CN: lichao8096
SoGuDio Bolt Combination 14mm Outer Hexagon Bolt DIN933 304 Stainless Steel Hexagonal Screw Bolt (Size : M14160 [1 pc])
SoGuDio Material: The screw kit are made of 304 high quality stainless steel material, which features is strength and offers good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. || 304 stainless steel external thread eyebolt eyebolt self-tapping screw, made by super-large machine. After many experiments, it was proved that the outdoor will not be oxidized and rusted || Deep thread design: The screw with deep thread design can provide good fixing force in different wood and artificial materials, and it is not easy to peel off || 304 stainless steel, high hardness, , can be used in wet environment, do not worry about rust || Fine workmanship - All screw threads have clean cut edges and no sharp edges.
SoGuDio Material: The screw kit are made of 304 high quality stainless steel material, which features is strength and offers good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas. || 304 stainless steel external thread eyebolt eyebolt self-tapping screw, made by super-large machine. After many experiments, it was proved that the outdoor will not be oxidized and rusted || Deep thread design: The screw with deep thread design can provide good fixing force in different wood and artificial materials, and it is not easy to peel off || 304 stainless steel, high hardness, , can be used in wet environment, do not worry about rust || Fine workmanship - All screw threads have clean cut edges and no sharp edges.
$40.48
21 Dec 2021
0.9083[0.41] Pounds
CN: WENXU2251
KEKEYANG Bolt Combination 14mm Outer Hexagon Bolt DIN933 304 Stainless Steel Hexagonal Screw Bolt (Size : M14160 [1 pc])
KEKEYANG Material: Made of 304 stainless steel, it has high hardness, oxidation resistance and durability, making the screws assortment tougher, rust-proof, wear-resistant. || 304 stainless steel external thread eyebolt eyebolt self-tapping screw, made by super-large machine. After many experiments, it was proved that the outdoor will not be oxidized and rusted || Deep thread design: The screw with deep thread design can provide good fixing force in different wood and artificial materials, and it is not easy to peel off || 304 stainless steel, high hardness, , can be used in wet environment, do not worry about rust || It has the advantages of sturdiness, durability, high strength, and no deformation.
KEKEYANG Material: Made of 304 stainless steel, it has high hardness, oxidation resistance and durability, making the screws assortment tougher, rust-proof, wear-resistant. || 304 stainless steel external thread eyebolt eyebolt self-tapping screw, made by super-large machine. After many experiments, it was proved that the outdoor will not be oxidized and rusted || Deep thread design: The screw with deep thread design can provide good fixing force in different wood and artificial materials, and it is not easy to peel off || 304 stainless steel, high hardness, , can be used in wet environment, do not worry about rust || It has the advantages of sturdiness, durability, high strength, and no deformation.
$40.45
21 Dec 2021
0.9083[0.41] Pounds
CN: ZHANG KE
ACCDUER Bolt Group 14mm Outer Hexagon Bolt DIN933 304 Stainless Steel Hexagonal Screw Bolt (Size : M14160 [1 pc])
ACCDUER QUALITY: Made of 304 stainless steel, wear-resistant, rust-resistant, and durable || 304 stainless steel external thread eyebolt eyebolt self-tapping screw, made by super-large machine. After many experiments, it was proved that the outdoor will not be oxidized and rusted || Deep thread design: The screw with deep thread design can provide good fixing force in different wood and artificial materials, and it is not easy to peel off || 304 stainless steel, high hardness, , can be used in wet environment, do not worry about rust || PERFORMANCE: With nuts, increase the surface contact area, reduce wear, and protect bolts and other fasteners.
ACCDUER QUALITY: Made of 304 stainless steel, wear-resistant, rust-resistant, and durable || 304 stainless steel external thread eyebolt eyebolt self-tapping screw, made by super-large machine. After many experiments, it was proved that the outdoor will not be oxidized and rusted || Deep thread design: The screw with deep thread design can provide good fixing force in different wood and artificial materials, and it is not easy to peel off || 304 stainless steel, high hardness, , can be used in wet environment, do not worry about rust || PERFORMANCE: With nuts, increase the surface contact area, reduce wear, and protect bolts and other fasteners.
Cross reference number
ZEXEL
106681-4000
1066814000
DAIHATSU
M14160
m14160
Zexel num
Bosch num
Firm num
Name
Calibration Data:
Adjustment conditions
Test oil
1404 Test oil ISO4113 or {SAEJ967d}
1404 Test oil ISO4113 or {SAEJ967d}
Test oil temperature
degC
40
40
45
Nozzle and nozzle holder
105780-8130
Bosch type code
EFEP215A
Nozzle
105780-0050
Bosch type code
DN6TD119NP1T
Nozzle holder
105780-2090
Bosch type code
EFEP215
Opening pressure
MPa
17.2
Opening pressure
kgf/cm2
175
Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600
Outer diameter - inner diameter - length (mm) mm 8-3-600
Overflow valve
131424-1520
Overflow valve opening pressure
kPa
157
123
191
Overflow valve opening pressure
kgf/cm2
1.6
1.25
1.95
Tester oil delivery pressure
kPa
157
157
157
Tester oil delivery pressure
kgf/cm2
1.6
1.6
1.6
Direction of rotation (viewed from drive side)
Left L
Left L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left L
Left L
Injection order
1-4-2-6-
3-5
Pre-stroke
mm
2.5
2.45
2.55
Beginning of injection position
Drive side NO.1
Drive side NO.1
Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5
Cal 1-4 deg. 60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5
Cyl.1-2 deg. 120 119.5 120.5
Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5
Cal 1-6 deg. 180 179.5 180.5
Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5
Cal 1-3 deg. 240 239.5 240.5
Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5
Cal 1-5 deg. 300 299.5 300.5
Injection quantity adjustment
Adjusting point
A
Rack position
13
Pump speed
r/min
900
900
900
Average injection quantity
mm3/st.
348
339
357
Max. variation between cylinders
%
0
-3
3
Basic
*
Fixing the rack
*
Injection quantity adjustment_02
Adjusting point
B
Rack position
5.5
Pump speed
r/min
250
250
250
Average injection quantity
mm3/st.
30
27
33
Max. variation between cylinders
%
0
-10
10
Fixing the rack
*
Timer adjustment
Pump speed
r/min
500
Advance angle
deg.
0.5
Timer adjustment_02
Pump speed
r/min
550
Advance angle
deg.
1.2
Timer adjustment_03
Pump speed
r/min
700
Advance angle
deg.
2.9
2.4
3.4
Timer adjustment_04
Pump speed
r/min
800
Advance angle
deg.
5
4.5
5.5
Remarks
Finish
Finish
Test data Ex:
Governor adjustment
N:Pump speed
R:Rack position (mm)
(1)Target notch: K
(2)RACK LIMIT: RAL
----------
K=10 RAL=13.5+-0.1mm
----------
----------
K=10 RAL=13.5+-0.1mm
----------
Speed control lever angle
F:Full speed
I:Idle
S:Stop
----------
----------
a=25deg+-5deg b=52deg+-5deg c=32deg+-3deg
----------
----------
a=25deg+-5deg b=52deg+-5deg c=32deg+-3deg
Stop lever angle
N:Pump normal
S:Stop the pump.
----------
----------
a=(19deg) b=(34deg)
----------
----------
a=(19deg) b=(34deg)
Information:
This Program can be administered either before or after a failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS9436" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and use "T" as the SIMS Description Code. If administered after failure, use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.
Termination Date
March 31, 1999Problem
Engines may experience ingress of coolant to the fuel system or vice versa due to the degradation of the sleeve seal-o-rings and the unit injector seal-o-rings. The contamination of coolant into the fuel system affects engine performance and can cause injector seizure. Contamination of fuel in the cooling system may reduce cooling performance.
Affected Product
Model & Identification Number
The work outlined in this program is to occur once only for the following engines with a minimum of 300,000 liters of fuel burned. In most applications this generally corresponds to:
*Every 300,000 kms of engine life for B-Triple and Triple Road Trains.*Every 450,000 kms of engine life for B-Double and Double Road Trains.*Every 600,000 kms of engine life for Single Trailers.3406E (5EK1-Up 6TS1-Up 1LW1-Up 5DS1-Up )
Parts Needed
6 - 9X7317 SEAL-O RING (Lower Seal-0-ring of unit Injector),6 - 9X7418 SEAL-O RING (Upper Seal-0-ring of Unit Injector),6 - 9X7419 SEAL-O RING (Mddle Seal-0-ring of Unit Injector),6 - 9X7430 SEAL-O-RING (Upper Seat-0-ring of unit Injector Sleeve),12- 9X7431 SEAL-O-RING (Lower Seal-0-ring of unit Injector Sleeve, two per sleeve),Action Required
See the attached procedure.
Service Claim Allowances
This job varies by cab type.
*See labor breakdowns. Labor Hours By Cab Type Parts Disposition
Please return seal-o-rings packaged in plastic bags, with relevant history of the truck and engine, to:
Steve Keenan,
Application and Service Engineer-
Caterpillar of Australia.
Private Mailbag 4.
Tuilamarine. 3043.
Handle all other parts in accordance with your Warranty Bulletin on warranty parts handling.
(1-Rework Procedure)Rework Procedure
1. Refer to attached parts book drawings.2. Obtain an ECM print-out from the Truck. Retain this print-out.3. Remove set of unit injectors. (Code 1290-010: refer p.109 of TRG for 3406E on highway truck engines;4. Drain and collect coolant.5. Remove and install set of unit injector sleeves (Code 1713-010: refer p. 111 of TRG).6. Replace injector body seals and sleeve seals. Return seals only as per parts disposition.7. Install set of unit injectors.8. Refill with coolant.9. Install set of unit injector sleeves.
Illustration 1.
Illustration 2.
Termination Date
March 31, 1999Problem
Engines may experience ingress of coolant to the fuel system or vice versa due to the degradation of the sleeve seal-o-rings and the unit injector seal-o-rings. The contamination of coolant into the fuel system affects engine performance and can cause injector seizure. Contamination of fuel in the cooling system may reduce cooling performance.
Affected Product
Model & Identification Number
The work outlined in this program is to occur once only for the following engines with a minimum of 300,000 liters of fuel burned. In most applications this generally corresponds to:
*Every 300,000 kms of engine life for B-Triple and Triple Road Trains.*Every 450,000 kms of engine life for B-Double and Double Road Trains.*Every 600,000 kms of engine life for Single Trailers.3406E (5EK1-Up 6TS1-Up 1LW1-Up 5DS1-Up )
Parts Needed
6 - 9X7317 SEAL-O RING (Lower Seal-0-ring of unit Injector),6 - 9X7418 SEAL-O RING (Upper Seal-0-ring of Unit Injector),6 - 9X7419 SEAL-O RING (Mddle Seal-0-ring of Unit Injector),6 - 9X7430 SEAL-O-RING (Upper Seat-0-ring of unit Injector Sleeve),12- 9X7431 SEAL-O-RING (Lower Seal-0-ring of unit Injector Sleeve, two per sleeve),Action Required
See the attached procedure.
Service Claim Allowances
This job varies by cab type.
*See labor breakdowns. Labor Hours By Cab Type Parts Disposition
Please return seal-o-rings packaged in plastic bags, with relevant history of the truck and engine, to:
Steve Keenan,
Application and Service Engineer-
Caterpillar of Australia.
Private Mailbag 4.
Tuilamarine. 3043.
Handle all other parts in accordance with your Warranty Bulletin on warranty parts handling.
(1-Rework Procedure)Rework Procedure
1. Refer to attached parts book drawings.2. Obtain an ECM print-out from the Truck. Retain this print-out.3. Remove set of unit injectors. (Code 1290-010: refer p.109 of TRG for 3406E on highway truck engines;4. Drain and collect coolant.5. Remove and install set of unit injector sleeves (Code 1713-010: refer p. 111 of TRG).6. Replace injector body seals and sleeve seals. Return seals only as per parts disposition.7. Install set of unit injectors.8. Refill with coolant.9. Install set of unit injector sleeves.
Illustration 1.
Illustration 2.